Powerful Outdoor IoT GatewayPLUS in the LoRaWAN® Network EUROPE of ZENNER Connect GmbH The ZENNER IoT GatewayPLUS Outdoor for building LoRaWAN coverage and realising IoT use cases. The ZENNER IoT GatewayPLUS Outdoor uses the powerful LoRaWAN technology, whose excellent building penetration and wide-area network coverage ensure the connectivity of IoT sensors even under difficult environmental and installation conditions. The outdoor gateway is ideal for LoRaWAN network coverage in rural and urban areas to receive readings from multiple sensors. The device can be used across divisions for a wide range of IoT applications and is an integral part of the ZENNER IoT system solutions. With just a few gateways, entire cities can be covered. Thanks to the very robust housing made of painted aluminium, the outdoor gateway is very resilient to extreme weather conditions and is characterised by a high level of fail-safety. In addition to the two external LoRa antennas for the 16 Channels, the ZENNER IoT GatewayPLUS Outdoor also uses an external LTE antenna to ensure the best possible connection to the backend - provided there is no Ethernet connection. This feature is not found in comparable competitor products. The gateway ensures LoRaWAN reception of your LoRaWAN end devices in the gateway's reception area and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN network EUROPE. Like all data transmissions, this is of course secure and AES 128 encrypted. The GatewayPLUS OUTDOOR gives you access to the LoRaWAN® network EUROPE of ZENNER Connect. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system ZENNER Datahub. You therefore do not have to integrate the gateway into the system yourself. The access to your personal ZENNER Datahub account/client, which you receive after ordering, is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors). The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect EUROPE LoRaWAN® network, you only need to establish the power supply. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 12 months. The data transmission from your gateway to the backend system is carried out via the SIM card of ZENNER Connect included in the Gateway. If you are planning a larger project, please contact us. We will be happy to support and advise you individually. By the way: ZENNER includes everything you need to operate the gateway in the scope of delivery - from the mounting device to all antennas and cables. Scope of use ZENNER IoT GatewayPLUS Outdoor: With the ZENNER IoT GatewayPLUS Outdoor you receive LoRaWAN connectivity and data transmission in the ZENNER Connect network EUROPE for 12 months and use of up to 50 LoRaWAN IoT sensors. The gateway is part of the LoRaWAN network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider. Of course, you only receive the data of your own end devices! Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.   Associated User Agreement ZENNER IoT GatewayPLUS Outdoor: Please note: This corresponding associated user agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway.   LoRaWAN® network coverage ZENNER Connect: To the overview map of our network coverage: To the network coverage   NEW OPTIONAL: Order the B.One Gallery visualisation solution for 24 months and for 50 devices with ZENNER IoT PLUG&PLAY directly. In addition, you secure the possibility that your purchased sensors can be automatically created in the ZC LoRaWAN network and already added to your B.One Gallery with the ZENNER IoT PLUG&PLAY login service. No more cumbersome configuration, setup, authentication of sensors necessary in the visualisation. As simple as IoT should be.   User agreement for the visualisation solution B.One Gallery: => Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.   Exchange and inspiration in the B.One Community Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you! Join the B.One Community   Features and functions of the GatewyPLUS Outdoor: Suitable for LoRaWAN IoT solutions ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union: GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. Bidirectional LoRaWAN radio communication Secure encrypted data transmission end-to-end (AES 128) No storage of sensor data such as meter readings on the gateway LoRaWAN gateway modules according to reference architecture 1.5 Automatic switch from mobile radio (already included) to Ethernet backhaul possible, Attention! If the gateway is connected to an Ethernet connection, the customer establishes the data transmission from the gateway to the backend via his own Internet connection!  This may incur additional costs for the data transmission! Therefore, use the connection via the integrated mobile radio data card/SIM, which is already included. This way you will not incur any additional data transmission costs! Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive). Please note: The reception quality and range of your LoRaWAN gateway depends on the mounting or installation location you choose. For details, please refer to the installation instructions and the additional technical documentation. You need mobile radio coverage at the installation or mounting location of the gateway! Alternatively, a separate Ethernet connection. For operation, you need a standard 230V power connection/socket! Plug & Play - easy integration through pre-configured software Security patches and software updates are distributed automatically LoRaWAN gateway modules according to reference architecture 1.5 Automatic switch from mobile radio to Ethernet backhaul (if available) Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive) Application areas: Optimal for outdoor IoT use cases Smart City, Smart Parking, Smart Waste, Smart Lighting, ... e.g. monitoring of local network transformer stations; shaft meter reading Smart Industry, Retail, Logistics, SMB, Smart Agriculture & Farming, Asset Tracking... Scope of delivery: IoT Outdoor GatewayPLUS 2x LoRa antenna incl. antenna cable 1x LTE antenna incl. antenna cable 1x Ethernet cable (5m) Mounting device incl. pole mount PoE injector Potential equalisation cable (earthing cable) Cable tie Technical data: Mobile radio: Mini SIM - 2G, 3G (UMTS), 4G (LTE) - external LTE antenna Ethernet: RJ45 - priority over mobile radio LoRa channel: 16 channels - two external antennas TX power: max. 27 dBm (500 mW) conducted Frequency: EU-868 Power supply: Power over Ethernet (PoE) Antennas: External: 2 x LoRa, 1 x LTE (antennas incl. holder included in delivery) Protection class: IP67 Housing: Aluminium, lacquered Operating temperature: 0°C to +50°C Storage temperature: -40°C to +80°C Mounting: Wall, pole (bracket incl. earth cable included, galvanised steel) Maintenance: Remote firmware upgrades via ZENNER Cloud Certification: EN 301 489-3, EN 300 220-2

The LoRaWAN® gateway with 16 channels for the realization of IoT use casesCan be used in all LoRaWAN® networks / Power supply: Power over Ethernet (PoE)Discover the future of intelligent networking with the ZENNER IoT Gateway Outdoor 16! This powerful LoRaWAN® gateway not only offers you outstanding building penetration, but also comprehensive network coverage that ensures stable connectivity of your IoT sensors even under the most demanding conditions. Imagine how you can monitor and control your environment in real time - whether in rural areas or urban centers. With the ZENNER Gateway, this dream becomes a reality. Take advantage of a smart infrastructure and experience the ease of data transmission. Whether you want to monitor the air quality in your city or optimize the energy consumption in your building - the ZENNER IoT Gateway Outdoor 16 is your reliable partner on this journey.What makes this product unique? Its robustness and versatility! The painted aluminum housing withstands extreme weather conditions and ensures maximum reliability. The integration of two external LoRa antennas and an LTE antenna guarantees a first-class connection to the backend. The gateway also supports bidirectional communication with encrypted data transmission (AES 128) so that your information is always secure.The ZENNER IoT Gateway is not only a technical masterpiece, but also extremely adaptable. It can be easily integrated into a wide range of IoT applications, be it heat cost allocators, water or heat meters or even smart city projects such as parking sensors and air quality sensors. With just a few gateways, you can already cover entire cities and thus integrate numerous end devices into the LoRaWAN® wireless system. You can rely on the quality and experience of ZENNER. Our products are developed according to reference architecture 1.5 and support the Semtech Packet Forwarder to always offer you the best performance. In addition, there is an automatic switch from mobile radio to Ethernet backhaul when available - so you are always optimally connected.Performance characteristics in overviewSupport for the Basics StationSuitable for LoRaWAN® IoT solutionsBidirectional LoRaWAN® radio communicationEncrypted end-to-end data transmission (AES 128)No storage of meter readings on the gatewayFields of application in EuropeLoRaWAN®-Gateway modules according to reference architecture 1.5Support for the Semtech Packet ForwarderAutomatic change from mobile radio to Ethernet backhaul (if available)ApplicationsSmart City (Smart Parking, Smart Waste, Smart Lighting,…)Monitoring of local network transformer stationsReadout of shaft meters Asset TrackingScope of deliveryGateway - pre-assembled on assembly supportMounting bracket with nuts, spring ring and washers2x spacer sleeves for mounting bracket 2x 868 MHz LoRaWAN®-Antennas1x LTE broadband antenna3x Antenna cable Cable ties2x RJ45 PlugsEquipotential bonding cable (16 mm²)Network cable (5 m) mit PG cable glandPoE injectorPower cord for PoE injectorPoE injector Equipotential bonding cableTechnical dataCellular network: Mini SIM – 2G, 3G (UMTS), 4G (LTE) – external LTE antenna Ethernet: RJ45 – priority over cellular network # LoRa channel: 16 channels - two external antennas TX power: max. 27 dBm (500 mW) conducted Frequency: EU-868 Power supply: Power over Ethernet (PoE) Antennas external: 2 x LoRa, 1 x cellular network (antennas incl. mounting bracket included in scope of delivery) Protection class: IP67Housing: Aluminium, coated Operating temperature: -10 °C to +50 °C Storage: temperature: -40 °C to +80 °C Installation: Wall, pole (bracket incl. grounding cable included in scope of delivery, galvanized steel) Maintenance: Remote firmware upgrades Certification: EN 301 489-3, EN 300 220-2 Weight: approx. 4.1 kg

Leistungsfähiges Indoor IoT Gateway im LoRaWAN®-Netz EUROPE der ZENNER Connect GmbHDieses ZENNER IoT GatewayPLUS Indoor nutzt die leistungsfähige LoRaWAN®-Technologie, deren hervorragende Gebäudedurchdringung und weiträumige Netzabdeckung die Konnektivität von IoT Sensoren auch unter schwierigen Umwelt- und Installationsbedingungen gewährleisten.Ideal geeignet ist das Gateway zum Empfang Ihrer LoRaWAN® Geräte und Sensoren innerhalb eines Gebäudes und in näherer Umgebung, um die Werte teilweise schwer zugänglicher Sensoren in mehreren Stockwerken sowie Kellerräumen, Garagen, Gärten, Parkplätzen zu empfangen – ganz ohne zusätzliche Repeater. Das Gerät kann spartenübergreifend für eine Vielzahl von IoT-Anwendungen eingesetzt werden. Das ZENNER IoT GatewayPLUS Indoor wurde bereits in über 30.000 LoRaWAN® Systeminstallationen der Minol ZENNER Gruppe verbaut und ist fester Bestandteil vieler Minol ZENNER IoT-Systemlösungen. Durch sein absichtlich schlicht gehaltenes Design fällt das Gateway in seiner Umgebung kaum auf. Das Gateway stellt den LoRaWAN® Empfang Ihrer LoRaWAN® Endgeräte im Empfangsbereich des Gateways sicher und überträgt deren Daten an das Backend. Neben dem Empfang Ihrer Geräte über Ihr eigenes Gateway hinaus, erhalten Sie als besonderen Mehrwert auch deren Daten, wenn diese von einem der anderen Gateways im ZENNER Connect LoRaWAN®-Netzwerk EUROPE empfangen werden. Wie alle Datenübertragungen natürlich sicher und AES 128 verschlüsselt. Mit dem GatewayPLUS Indoor erhalten Sie für 12 Monate Zugang zum LoRaWAN®-Netz EUROPE der ZENNER Connect. Um nach der Inbetriebnahme automatisch eine Netzverbindung herzustellen, wurde das Gateway zuvor bereits für Sie im Backend System ZENNER Datahub hinterlegt. Sie müssen das Gateway also nicht erst noch eigenständig im System einbinden. Den nach der Bestellung erhaltenen Zugang zu Ihrem persönlichen ZENNER Datahub Account/Mandanten benötigen Sie letztlich nur für die Anlage von Sensoren, deren Daten Sie über das Gateway empfangen möchten.Das Gateway ist also bereits vollständig und dauerhaft vorkonfiguriert und fester Bestandteil des ZENNER Connect LoRaWAN®-Netzes, sie müssen nur noch die Stromversorgung herstellen. Mit dem Gateway ist die LoRaWAN® Datenübertragung von 50 eigenen LoRaWAN Endgeräten im Kaufpreis für 12 Monate enthalten. Die Datenübertragung von Ihrem Gateway in das Backendsystem erfolgt über die im Gateway enthaltene SIM Karte der ZENNER Connect. Planen Sie in größeren Projektumfängen so nehmen Sie bitte Kontakt mit uns auf, gerne unterstützen und beraten wir Sie individuell.Nutzungsumfang ZENNER IoT GatewayPLUS Indoor: Mit dem ZENNER IoT GatewayPLUS Indoor erhalten Sie LoRaWAN® Connectivity und Datenübertragung im ZENNER Connect LoRaWAN® Netz EUROPE für 12 Monate und Nutzung von bis zu 50 LoRaWAN® IoT Sensoren.Das Gateway ist Bestandteil des LoRaWAN®-Netzwerkes der ZENNER Connect GmbH (ZC). Technologiebedingt werden sämtliche LoRaWAN® Endgeräte im Empfangsbereich Ihres Gateways verschlüsselt empfangen und an den Netzwerkprovider übertragen. Sie erhalten natürlich nur die Daten Ihrer eigenen Endgeräte!Das Gateway ist aufgrund der Netzregulierung innerhalb der Europäischen Union und derzeit NUR in folgenden LÄNDERN zu verwenden! DEUTSCHLAND, ÖSTERREICH, DÄNEMARK, SCHWEDEN, POLEN, NIEDERLANDE, FRANKREICH, SPANIEN, ITALIEN, KROATIEN und SLOWENIEN.Nutzungsvereinbarung ZENNER IoT GatewayPLUS IndoorBitte beachten Sie: Diese zugehörige Nutzungsvereinbarung (auch nachfolgend zu finden unter "Downloads") ist Vertragsbestandteil beim Kauf dieses Gateways.LoRaWAN®-Netzabdeckung ZENNER ConnectZur Übersichtskarte unserer Netzabdeckung: Zur Netzabdeckung      JETZT ENTDECKEN: Die B.One Gallery Visualisierungslösung für 12 Monate und für 50 Devices mit ZENNER IoT PLUG&PLAY direkt mitbestellen!Sie möchten einen B.One Gallery Zugang erhalten und somit Ihre Sensordaten optisch aufbereit auf der Visualisierungsplattform einsehen? Dann bestellen Sie einfach die B.One Gallery mit dazu. Mit dem Kauf des Artikels "B.One Gallery" erhalten Sie einen Zugang für 12 Monate und können bis zu 50 Sensoren verknüpfen. Mehr Infos zur B.One Gallery finden Sie hier.Nutzungsvereinbarung für die Visualisierungslösung B.One Gallery=> Zu beachten bei Kauf der Dienstleistung B.One GalleryBitte beachten Sie: Diese zugehörige Nutzungsvereinbarung (auch nachfolgend zu finden unter "Downloads") ist Vertragsbestandteil beim Kauf der B.One Gallery (Artikelnummer 801628).   Austausch und Inspiration in der B.One Community  Haben Sie bereits eigene LoRaWAN® Anwendungsfälle im Internet der Dinge umgesetzt oder möchten Sie neu in das Thema einsteigen und sich austauschen? Oder hat Ihnen der Chef die Aufgabe gegeben, in das Internet der Dinge einzutauchen? Dann sind Sie in der neuen B.One Community genau richtig!  Mehr zur B.One Community  Leistungsmerkmale und Funktionen des GatewayPLUS IndoorGeeignet für LoRaWAN® IoT-Lösungen ZENNER Connect GmbH ist der LoRaWAN® Netzbetreiber Ihres Gateways. Für Sie entfällt damit die Anmeldung als eigenständiger LoRaWAN® Netzbetreiber. Gateway Verwendung NUR in den folgenden Ländern der Europäischen Union:DEUTSCHLAND, ÖSTERREICH, DÄNEMARK, SCHWEDEN, POLEN, NIEDERLANDE, FRANKREICH, SPANIEN, ITALIEN, KROATIEN und SLOWENIEN.Bidirektionale LoRaWAN® Funkkommunikation Sicher verschlüsselte Datenübertragung Ende-zu-Ende (AES 128) Keine Speicherung von Sensordaten wie z.B. Ablesewerten auf dem Gateway LoRaWAN®-Gateway-Module nach Referenzarchitektur 1.5 Automatischer Wechsel von Mobilfunk (bereits enthalten) zu Ethernet Backhaul möglich. Achtung: Wird das Gateway an eine LAN-Verbindung angeschlossen, stellt der Kunde die Datenübertragung vom Gateway zum Backend über seine eigene Internetverbindung her! Hierbei können zusätzliche Kosten für die Datenübertragung anfallen! Daher nutzen Sie die Anbindung über die integrierte Mobilfunkdatenkarte/SIM, diese ist bereits inkludiert. So entstehen Ihnen keine weiteren Datenübertragungskosten! Bitte beachten Sie: Die Empfangsqualität und Reichweite Ihres LoRaWAN® Gateways ist abhängig von dem von Ihnen gewählten Montage- bzw. Aufstellungsstandortes. Details hierzu entnehmen Sie bitte der Montageanleitung und den weiterführenden technischen Dokumentationen. Der durchschnittliche Empfangsbereich innerhalb eines Gebäudes kann je nach Gebäudebeschaffenheit bis zu 8-10 Stockwerke umfassen.Die Empfangsabdeckung außerhalb des Gebäudes, in welchem das Gateway montiert wird, kann bis zu 1 Kilometer betragen. Am Aufstellungs- bzw. Montagestandort des Gateways benötigen Sie Mobilfunkabdeckung! Alternativ einen eigenen Ethernet Anschluss. Für den Betrieb benötigen Sie einen handelsüblichen 230V Stromanschluss/Steckdose. Konformitätserklärung des Herstellers, einschließlich aller anwendbaren Vorschriften zu Funk, Niederspannung und Elektrizität von Europa und RED (Richtlinie für Funkgeräte)AnwendungsbereicheOptimal für LoRaWAN® basierte IoT Anwendungen in Gebäuden sowie im Gebäudeumfeld.Smart Building / Home / Office / Schule / Parking Smart City / Smart IndustryLuftqualitätsmessung in InnenräumenTechnische DatenMobilfunk: Mini SIM – 2G, 3G (UMTS), 4G (LTE) – interne Antenne Ethernet RJ45 – Priorität gegenüber Mobilfunk Ethernet: RJ45 – Priorität gegenüber MobilfunkLoRa Channel: 8 Kanäle – interne Antenne/-n TX-Leistung: max. 27 dBm (500 mW) conducted Frequenz: EU-868 MHz Stromversorgung: Internes NetzteilAntennen: Intern - 1 x LoRa, 1 x Mobilfunk Schutzart: IP30 Gehäuse: Kunststoff mit Flammschutz nach UL94-2013 Rev.9-2019, class.: V-0 Abmessungen [L x B x H]: 18,4 x 12,7 x 4,8 cm Betriebstemperatur: 0 °C bis +50 °CLagertemperatur: -40 °C bis +80 °C LED: Power, LAN, Mobilfunk, Vorkonfiguriert und verbunden mit dem ZENNER Connect LoRaWAN®-Netzwerk (dies ist NICHT veränderbar!) Montage: Wand (Halterung inkl. Schrauben und Dübel im Lieferumfang enthalten) Wartung: Remote Firmware Upgrades erfolgen automatischZertifizierung: EN 301 489-3, EN 300 220-2

Achtung: Die externen Antennen sind nicht im Lieferumfang enthalten und müssen separat dazugekauft werden!Antenne LoRa Antenne LTE Leistungsfähiges Indoor IoT Gateway im LoRaWAN®-Netz EUROPE der ZENNER Connect GmbHDieses ZENNER IoT GatewayPLUS Indoor nutzt die leistungsfähige LoRaWAN®-Technologie, deren hervorragende Gebäudedurchdringung und weiträumige Netzabdeckung die Konnektivität von IoT Sensoren auch unter schwierigen Umwelt- und Installationsbedingungen gewährleisten.Ideal geeignet ist das Gateway zum Empfang Ihrer LoRaWAN® Geräte und Sensoren innerhalb eines Gebäudes und in näherer Umgebung, um die Werte teilweise schwer zugänglicher Sensoren in mehreren Stockwerken sowie Kellerräumen, Garagen, Gärten, Parkplätzen zu empfangen – ganz ohne zusätzliche Repeater. Das Gerät kann spartenübergreifend für eine Vielzahl von IoT-Anwendungen eingesetzt werden. Das ZENNER IoT GatewayPLUS Indoor wurde bereits in über 30.000 LoRaWAN® Systeminstallationen der Minol ZENNER Gruppe verbaut und ist fester Bestandteil vieler Minol ZENNER IoT-Systemlösungen. Durch sein absichtlich schlicht gehaltenes Design fällt das Gateway in seiner Umgebung kaum auf. Das Gateway stellt den LoRaWAN® Empfang Ihrer LoRaWAN® Endgeräte im Empfangsbereich des Gateways sicher und überträgt deren Daten an das Backend. Neben dem Empfang Ihrer Geräte über Ihr eigenes Gateway hinaus, erhalten Sie als besonderen Mehrwert auch deren Daten, wenn diese von einem der anderen Gateways im ZENNER Connect LoRaWAN®-Netzwerk EUROPE empfangen werden. Wie alle Datenübertragungen natürlich sicher und AES 128 verschlüsselt. Mit dem GatewayPLUS Indoor erhalten Sie für 12 Monate Zugang zum LoRaWAN®-Netz EUROPE der ZENNER Connect. Um nach der Inbetriebnahme automatisch eine Netzverbindung herzustellen, wurde das Gateway zuvor bereits für Sie im Backend System ZENNER Datahub hinterlegt. Sie müssen das Gateway also nicht erst noch eigenständig im System einbinden. Den nach der Bestellung erhaltenen Zugang zu Ihrem persönlichen ZENNER Datahub Account/Mandanten benötigen Sie letztlich nur für die Anlage von Sensoren, deren Daten Sie über das Gateway empfangen möchten.Das Gateway ist also bereits vollständig und dauerhaft vorkonfiguriert und fester Bestandteil des ZENNER Connect LoRaWAN®-Netzes, sie müssen nur noch die Stromversorgung herstellen. Mit dem Gateway ist die LoRaWAN® Datenübertragung von 50 eigenen LoRaWAN Endgeräten im Kaufpreis für 12 Monate enthalten. Die Datenübertragung von Ihrem Gateway in das Backendsystem erfolgt über die im Gateway enthaltene SIM Karte der ZENNER Connect. Planen Sie in größeren Projektumfängen so nehmen Sie bitte Kontakt mit uns auf, gerne unterstützen und beraten wir Sie individuell.Nutzungsumfang ZENNER IoT GatewayPLUS Indoor: Mit dem ZENNER IoT GatewayPLUS Indoor erhalten Sie LoRaWAN® Connectivity und Datenübertragung im ZENNER Connect LoRaWAN® Netz EUROPE für 12 Monate und Nutzung von bis zu 50 LoRaWAN® IoT Sensoren.Das Gateway ist Bestandteil des LoRaWAN®-Netzwerkes der ZENNER Connect GmbH (ZC). Technologiebedingt werden sämtliche LoRaWAN® Endgeräte im Empfangsbereich Ihres Gateways verschlüsselt empfangen und an den Netzwerkprovider übertragen. Sie erhalten natürlich nur die Daten Ihrer eigenen Endgeräte!Das Gateway ist aufgrund der Netzregulierung innerhalb der Europäischen Union und derzeit NUR in folgenden LÄNDERN zu verwenden! DEUTSCHLAND, ÖSTERREICH, DÄNEMARK, SCHWEDEN, POLEN, NIEDERLANDE, FRANKREICH, SPANIEN, ITALIEN, KROATIEN und SLOWENIEN.Nutzungsvereinbarung ZENNER IoT GatewayPLUS IndoorBitte beachten Sie: Diese zugehörige Nutzungsvereinbarung (auch nachfolgend zu finden unter "Downloads") ist Vertragsbestandteil beim Kauf dieses Gateways.LoRaWAN®-Netzabdeckung ZENNER ConnectZur Übersichtskarte unserer Netzabdeckung: Zur Netzabdeckung      JETZT ENTDECKEN: Die B.One Gallery Visualisierungslösung für 12 Monate und für 50 Devices mit ZENNER IoT PLUG&PLAY direkt mitbestellen!Sie möchten einen B.One Gallery Zugang erhalten und somit Ihre Sensordaten optisch aufbereit auf der Visualisierungsplattform einsehen? Dann bestellen Sie einfach die B.One Gallery mit dazu. Mit dem Kauf des Artikels "B.One Gallery" erhalten Sie einen Zugang für 12 Monate und können bis zu 50 Sensoren verknüpfen. Mehr Infos zur B.One Gallery finden Sie hier.Nutzungsvereinbarung für die Visualisierungslösung B.One Gallery=> Zu beachten bei Kauf der Dienstleistung B.One GalleryBitte beachten Sie: Diese zugehörige Nutzungsvereinbarung (auch nachfolgend zu finden unter "Downloads") ist Vertragsbestandteil beim Kauf der B.One Gallery (Artikelnummer 801628).   Austausch und Inspiration in der B.One Community  Haben Sie bereits eigene LoRaWAN® Anwendungsfälle im Internet der Dinge umgesetzt oder möchten Sie neu in das Thema einsteigen und sich austauschen? Oder hat Ihnen der Chef die Aufgabe gegeben, in das Internet der Dinge einzutauchen? Dann sind Sie in der neuen B.One Community genau richtig!  Mehr zur B.One Community  Leistungsmerkmale und Funktionen des GatewayPLUS IndoorGeeignet für LoRaWAN® IoT-Lösungen ZENNER Connect GmbH ist der LoRaWAN® Netzbetreiber Ihres Gateways. Für Sie entfällt damit die Anmeldung als eigenständiger LoRaWAN® Netzbetreiber. Gateway Verwendung NUR in den folgenden Ländern der Europäischen Union:DEUTSCHLAND, ÖSTERREICH, DÄNEMARK, SCHWEDEN, POLEN, NIEDERLANDE, FRANKREICH, SPANIEN, ITALIEN, KROATIEN und SLOWENIEN.Bidirektionale LoRaWAN® Funkkommunikation Sicher verschlüsselte Datenübertragung Ende-zu-Ende (AES 128) Keine Speicherung von Sensordaten wie z.B. Ablesewerten auf dem Gateway LoRaWAN®-Gateway-Module nach Referenzarchitektur 1.5 Automatischer Wechsel von Mobilfunk (bereits enthalten) zu Ethernet Backhaul möglich. Achtung: Wird das Gateway an eine LAN-Verbindung angeschlossen, stellt der Kunde die Datenübertragung vom Gateway zum Backend über seine eigene Internetverbindung her! Hierbei können zusätzliche Kosten für die Datenübertragung anfallen! Daher nutzen Sie die Anbindung über die integrierte Mobilfunkdatenkarte/SIM, diese ist bereits inkludiert. So entstehen Ihnen keine weiteren Datenübertragungskosten! Bitte beachten Sie: Die Empfangsqualität und Reichweite Ihres LoRaWAN® Gateways ist abhängig von dem von Ihnen gewählten Montage- bzw. Aufstellungsstandortes. Details hierzu entnehmen Sie bitte der Montageanleitung und den weiterführenden technischen Dokumentationen. Der durchschnittliche Empfangsbereich innerhalb eines Gebäudes kann je nach Gebäudebeschaffenheit bis zu 8-10 Stockwerke umfassen.Die Empfangsabdeckung außerhalb des Gebäudes, in welchem das Gateway montiert wird, kann bis zu 1 Kilometer betragen. Am Aufstellungs- bzw. Montagestandort des Gateways benötigen Sie Mobilfunkabdeckung! Alternativ einen eigenen Ethernet Anschluss. Für den Betrieb benötigen Sie einen handelsüblichen 230V Stromanschluss/Steckdose. Konformitätserklärung des Herstellers, einschließlich aller anwendbaren Vorschriften zu Funk, Niederspannung und Elektrizität von Europa und RED (Richtlinie für Funkgeräte)AnwendungsbereicheOptimal für LoRaWAN® basierte IoT Anwendungen in Gebäuden sowie im Gebäudeumfeld.Smart Building / Home / Office / Schule / Parking Smart City / Smart IndustryLuftqualitätsmessung in InnenräumenTechnische DatenMobilfunk: Mini SIM – 2G, 3G (UMTS), 4G (LTE) – interne Antenne Ethernet RJ45 – Priorität gegenüber Mobilfunk Ethernet: RJ45 – Priorität gegenüber MobilfunkLoRa Channel: 8 Kanäle – interne Antenne/-n TX-Leistung: max. 27 dBm (500 mW) conducted Frequenz: EU-868 MHz Stromversorgung: Internes NetzteilAntennen: Intern - 1 x LoRa, 1 x Mobilfunk Schutzart: IP30 Gehäuse: Kunststoff mit Flammschutz nach UL94-2013 Rev.9-2019, class.: V-0 Abmessungen [L x B x H]: 18,4 x 12,7 x 4,8 cm Betriebstemperatur: 0 °C bis +50 °CLagertemperatur: -40 °C bis +80 °C LED: Power, LAN, Mobilfunk, Vorkonfiguriert und verbunden mit dem ZENNER Connect LoRaWAN®-Netzwerk (dies ist NICHT veränderbar!) Montage: Wand (Halterung inkl. Schrauben und Dübel im Lieferumfang enthalten) Wartung: Remote Firmware Upgrades erfolgen automatischZertifizierung: EN 301 489-3, EN 300 220-2

MinoConnectUSB and optical head - Set for configuration and readout of ZENNER devices Set for mobile reading and configuration of ZENNER measuring devices and sensors. The "MinoConnectUSB Set Opto" is mainly used to read out and parameterize ZENNER devices via the optical interface. The two-part set consists of the "MinoConnectUSB", which is connected to a Windows mobile device or Laptop via USB, and the ZENNER IrDA "IrCombiHead" optical head. This is positioned on the optical interface of the respective ZENNER measuring device or sensor. The connection between MinoConnectUSB and the opto head is made via a SubD9 connector. Using the additional configuration and readout software MeteringSystemSolution (MSS) - in combination with the MinoConnectUSB Set Opto - the settings required on the device can be conveniently made from the Windows laptop or mobile device Features of MinoConnectUSB: USB / RS232 and RS485 interface LED operating status In conjunction with the ZENNER IrCombiHead, it supports the IEC 62056 (1107) and IrDA interfaces, the IEC 62056 (1107) and IrDA interfaces Additionally required configuration software MSS: Please note that the configuration software MSS is required to configure and read out ZENNER LoRa devices. This can be downloaded free of charge as a demo version. You will find the link below under "Related links".

Powerful Indoor GatewayPLUS SMART in the LoRaWAN® Network EUROPE of ZENNER Connect The ZENNER IoT GatewayPLUS SMART uses powerful LoRaWAN® technology, whose excellent building penetration and wide-area network coverage ensure connectivity of IoT sensors even under difficult environmental and installation conditions. This indoor gateway is ideally suited for receiving your LoRaWAN® devices and sensors inside a building and in the immediate vicinity, in order to receive the values of sometimes difficult-to-access sensors on several floors as well as basements, garages, gardens, car parks - all without additional repeaters. It can be used across all sectors for a wide range of IoT applications. The smart gateway ensures the LoRaWAN® reception of your LoRaWAN® end devices in the reception area of the gateway and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN® network EUROPE. Like all data transmissions, of course, secure and AES 128 encrypted. The GatewayPLUS SMART gives you access to the ZENNER Connect LoRaWAN® network EUROPE. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system ZENNER Datahub. You therefore do not have to integrate the gateway into the system yourself. The access to your personal ZENNER Datahub account/client that you receive after ordering is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors). The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect LoRaWAN® network EUROPE, you only need to establish the power supply, connect the gateway to your WLAN and you can start immediately. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 12 months. Data transmission from your gateway to the backend system via your WLAN connection may incur additional costs. If you are planning a larger project, please contact us. We will be happy to provide you with individual support and advice. Scope of use ZENNER IoT GatewayPLUS SMART: With the ZENNER IoT GatewayPLUS SMART you receive LoRaWAN® connectivity and data transmission via your Wi-Fi in the ZENNER Connect LoRaWAN® network EUROPE for 12 months and use of up to 50 LoRaWAN® IoT sensors. The gateway is part of the LoRaWAN® network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN® end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider via your Wi-Fi! Of course, you only receive the data of your own end devices! Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. User Agreement ZENNER IoT GatewayPLUS SMART: Please note: This associated user agreement (also to be found below under "Available Downloads") is part of the contract when purchasing this gateway.   LoRaWAN® network coverage ZENNER Connect: To the overview map of our network coverage: https://www.mz-connect.com/netzabdeckung/   NEW OPTIONAL: Order the B.One Gallery visualisation solution for 12 months and for 50 devices with ZENNER IoT PLUG&PLAY directly. In addition, you secure the possibility that your purchased sensors can be automatically created in the ZC LoRaWAN network and already added to your B.One Gallery with the ZENNER IoT PLUG&PLAY login service. No more cumbersome configuration, setup, authentication of sensors necessary in the visualisation. As simple as IoT should be.   User agreement for the visualisation solution B.One Gallery: => Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.   Exchange and inspiration in the B.One Community Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you! Join the B.One Community   Features and functions of GatewayPLUS Smart Suitable for LoRaWAN® IoT solutions ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union:GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. Bidirectional LoRaWAN® radio communication Secure encrypted data transmission end-to-end (AES 128) No storage of sensor data such as meter reading values on the gateway LoRaWAN® gateway modules according to reference architecture 1.5 Connection to the backend with available WLAN network.Attention: The customer establishes the data transmission from the gateway to the backend via his own internet connection. This may incur additional costs for data transmission. Please note: The reception quality and range of your LoRaWAN® gateway depends on the installation location you have chosen. For details, please refer to the installation instructions or the User Guide. The average reception coverage inside a building can be up to 8-10 floors, depending on the building characteristics. The reception coverage outside the building where the gateway is mounted can be up to 1 kilometer. You will need WLAN connectivity at the gateway's mounting location. For operation you need a standard 230V power connection/socket. Declaration of Conformity (CE) and RoHS standards are complied with. Areas of application: Optimal for LoRaWAN® based IoT applications in buildings as well as in the building environment. Smart Building / Home / Office / School / Parking Indoor air quality measurement Submetering Technical data: Backhaul: Wi-Fi 802.11 b/g/n, frequency band: 2.4 GHz, security: WPA/WPA2 LoRa Channel: 8 channels, receive sensitivity: -140dBm, internal antenna TX power: up to +20dBm Frequency: EU-868 (862 - 870MHz) Power supply: 230V power outlet (Euro plug) / USB Type-C (900mA). Antennas: Internal - 1 x LoRa, 1 x Wi-Fi Protection class: IP40 Housing: Plastic with flame retardant according to UL94-2013 Rev.9-2019, class.: V-0 Dimensions [L x W x H]: 100 x 82 x 38 mm Weight: 160g Operating temperature: 0 °C to +40 °C Storage temperature: -40 °C to +70 °C LED: Wi-Fi status Preconfigured and connected to the ZENNER Connect LoRaWAN® network.(this is NOT changeable!) Mounting: power socket Standards: CE, RoHS

B.One Gallery - The standardised visualisation platform for your IoT sensors & solutions With the purchase of this service product, you receive an account on the B.One Gallery visualisation platform with access for up to 50 devices for a term of 12 months. The contractual basis is the associated user agreement. It is an integral part of the contract when this service is purchased. The period of use begins on the date of purchase, i.e. date of purchase = date of performance.   With the B.One Gallery you can display sensor data in near real-time and in different formats. Standardised representations enable intuitive and very simple operation. Create dashboards, reports and notification settings for your IoT use cases with just a few clicks, practically without prior knowledge.   Keep an eye on and access your data at any time and from anywhere. The B.One Gallery as a visualisation platform for IoT applications is browser-based and can be displayed on all modern browsers. Forget about installations, updates, drivers & Co. Use your B.One Gallery from your smartphone, tablet or PC, see your measurement data, actions and histories of your IoT sensors everywhere and stay informed. Create your own graphics, charts and reports with just a few clicks and share them with your colleagues, partners, customers or service providers simply via LInk. The great thing about this is that the recipients can simply use them without being users of the B.One Gallery themselves. You decide whether the reports are static or update automatically. No matter how many IoT devices, application scenarios or locations you want to manage and monitor, you only need one B.One Gallery - it is compatible and simply grows with you. From a single sensor in your office, workshop, warehouse, cold room, production hall, restaurant, shop, farm, administration building and and.... to fully automated IoT tracking of numerous and diverse use cases, no matter whether indoor or outdoor, no matter how many locations in your company, your buildings, on the company premises or from the entire smart city or region.   Stay informed at all times and up to date! The integrated monitoring and notification system detects deviating states and informs you immediately via the notification channels you set when things are no longer as they should be. With the easy-to-use yet sophisticated user and authorisation system, you can create additional users in no time at all, grant approvals and also compare your own IoT systems with others - for example, your consumption values, temperatures, etc. B.ONE GALLERY is the basis for your IoT solutions, sensor visualisation, dashboards and reporting, easy setup of alarms when things are not as they should be. The possible uses and visualisation of IoT use cases are almost unlimited. More than 100 sensors are currently supported for a wide variety of use cases, and more are being added all the time. No matter whether you want to monitor climate data - indoor or outdoor - or air quality, room temperature, humidity, CO2, cooling, soil moisture, precipitation amounts, energy consumption (water, heat, electricity,...), movement, presence, brightness, location and position, system statuses, opening and closing status of windows, doors, gates,...   Filling quantities whether for tanks, containers, boxes, silos, waste bins,... the B.One Gallery is the visualisation solution that shows you all this in a simple and uncomplicated way. Furthermore, it doesn't matter in which sector you are active, whether in trade, trade or industry, whether you are a company, a municipality, a city or a public authority. The B.One Gallery shows you your IoT applications and sensor data, simply and easily understandable. The way IoT should be.

Extension/extension of use for the visualization platform "B.One Gallery" for another 12 months and up to another 50 devicesB.One Gallery - The standardized visualization platform for your IoT sensors & solutions. With this article you extend/renew the use of your B.One Gallery for 50 devices for another 12 months. The contractual basis is still the associated user agreement (also available below under "Available Downloads"). It is part of the contract when purchasing this usage extension. If you are currently already using the B.One Gallery, this package can simply be booked and the term of use will be extended by 12 months from the date of purchase (=service date). If you would like to visualize the data of more than 50 devices in the B.One Gallery, then you also have the possibility to increase the number of devices accordingly with this package.Attention: The use of the B.One Gallery is extended for another 12 months from the date of purchase (=date of performance)! An extension beyond 12 months is not possible. In case of multiple purchases, the number of usable devices increases by 50 devices each time.Example 1: You have purchased the use of the Gallery as part of a GatewayPlus (SMART, INDOOR, OUTDOOR) purchase for 24 months and 50 devices. However, you would like to operate 80 devices. Then you would have to extend the usage 1 time (50 devices for 12 months).Example 2: Your Gallery usage expires (the 24 months end). You want to continue using Gallery, so you purchase a 12-month extension for up to 50 devices. An extension beyond 12 months is not possible. You can find more information about the B.One Gallery here.

Temperature and humidity sensor with wireless M-Bus or LoRaWAN® radio interface The Indoor T+H Sensor records the temperature and relative humidity of indoor spaces. The sensor supports the user in optimizing the heating and ventilation behavior. The current temperature and humidity values can be read on the device display at any time. The data collected and stored by the device is transmitted to downstream recording systems using wireless M-Bus or LoRaWAN® radio technology. This creates transparency regarding the heating and ventilation behavior in order to be able to derive possible efficiency and optimization measures. This data can be used, for example, to prevent mold formation. The temperature and humidity measurement takes place internally in the device every three minutes. The average value for the last quarter of an hour is determined from the measured values, saved and added up in the register of the respective temperature or humidity range. The Radio transmission occurs every 20 seconds for wireless M-Bus and hourly for LoRaWAN®. Performance features (selection):  Measurement, display and data transmission of temperature and humidity values Data transmission via wireless M-Bus (factory set parameter)- or LoRaWAN® Battery life up to 10 years + storage reserve Internal antenna Plug & Play – commissioning mode Optical interface for configuration and reading of stored data Wall mounting with sealing option   Sensor technology: Temperature measurement range: -20°C to 50°C Measuring accuracy: ±0.3°C in the range from 5°C to 50°C Humidity measuring range: 0% to 100% RH Measuring accuracy: ±2% RH in the range of 20% to 80% Resolution of the measured values: 0.1°C and 0.1% RH

ZENNER CO2 INDICATOR L868 ID A for LoRaWAN® The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK. Download CO2 Sensor Actility ZENNER Datacake Bundle Link to ThingPARK Actility ZENNER DataCake AirQuality Solution Use Cases Indoor Air Quality Smart Building Smart School Smart Office Smart Home Product Features Modern design Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status LED traffic light Integrated battery Configuration Over the Air (OTA) Evaluation of the CO2 measured values Range (ex works) Evaluation LED Farbe < 800ppm normal green 800 – 999ppm slightly increased yellow 1.000 – 1.399ppm high purple > 1.399ppm very high red The measuring ranges can be set individually via LoRaWAN® downlink. Specifications Model CO2 INDICATOR L868 ID A Weight 115g Size 63,6 x 46,0 x 54,6mm Display Size 59,9 x 49,9mm LoRaWAN® Klasse A Frequency 863 ~ 870MHz Transmit Power max. 14dBm Battery 2.000mAh Power Input 5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten) Operating Temperature 0 ~ 40℃ Operating Humidity 0 ~ 99%rH (nicht kondensierende Umgebung) CO2 Measuring Range 400 ~ 9.999ppm Accuracy of 400 ~ 2.000ppm --> ±50ppm Accuracy of 2.000 ~ 9.999ppm --> no guarantee    Scope of Delivery ZENNER CO2 Indicator L868 ID A for LoRaWAN User Manual USB-A to USB-C Cabel Notice: There is no 5V power supply included in the delivery.  You can use a commercially available smartphone USB-A power adapter, for this purpose.

ZENNER PDC communication module LoRaWAN® 2-channel pulse adapter PDC communication module for integration of meters with pulse output into radio systems. Radio interface: LoRaWAN Sending interval: daily  With the PDC communication module (PDC = PulseDataCapture) you can integrate measuring devices with pulse output into modern wireless readout systems. The consumption data of water, heat, gas, oil or electricity meters with pulse output are transmitted wirelessly to a LoRaWAN™ network.The PDC communication module is battery operated. The battery life is up to 10 years depending on the version, transmission interval and ambient conditions. Typical applications: Radio readout of meters via LoRaWAN™ Modellvarianten: The PDC communication module is available in two versions: wireless M-Bus radio module according to OMS standard 4.0.2 (encryption mode 5), 868 MHz, EN 13757-4 (Order no. on request) LPWAN radio module (LoRaWAN™) Tip: Both potential-free (reed) contactors and electronic pulse outputs can be connected to the PDC. When connecting the PDC module to meters with electronic pulse output, we recommend that a compatibility test be carried out. Zusätzlich erforderliches Zubehör: To configure the PDC module, the special MinoConnectUSB and ZENNER IrDA optical head and the ZENNER software license MSS Configurator are required. The MinoConnectUSB set with optical head can be found in the "Accessories" tab below. The link to the free four-week demo version of the MSS software can also be found below under "Further links".

Smoke detector EASY PROTECT RADIO with LoRaWAN® Interface from ZENNERAttention: This item can only be ordered in increments of 4! Smoke detector from ZENNER approved according to DIN EN 14604 reliably detects all fire classes. It fulfils all standards and approvals required in by German regulations. Allows remote maintenance in accordance with DIN 14676-1 Type C construction: Complete remote inspection Comfort function: event-based LoRaWAN telegram when smoke is detected can be activated via downlink The LoRaWAN device detects the smoke development optically and is additionally equipped with a temperature sensor. This makes it particularly reliable in responding to both slow smouldering fires as well as fast fire progressions with high temperature development. The permanently installed battery of the smoke detector has a lifetime of 10 years and is automatically activated during assembly. The EASY PROTECT Radio is equipped with a large test button for muting as well as with LED control lamps, which ensure the functionality of the and possible interference signals. Note: In the case of smoke detection, an alarm tone is triggered, an alarm message via LoRaWAN can be activated via downlink from FW version 2.20. Approved according to DIN EN 14606 Approved according to DIN 14676 OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER Smoke Detector Easy Protect Radio LoRaWAN is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser.

Temperature and humidity sensor with LoRaWAN® or wireless M-Bus radio interface The Indoor T+H Sensor records the temperature and relative humidity of indoor spaces. The sensor supports the user in optimizing the heating and ventilation behavior. The current temperature and humidity values can be read on the device display at any time. The data collected and stored by the device is transmitted to downstream recording systems using wireless M-Bus or LoRaWAN® radio technology. This creates transparency regarding the heating and ventilation behavior in order to be able to derive possible efficiency and optimization measures. This data can be used, for example, to prevent mold formation. The temperature and humidity measurement takes place internally in the device every three minutes. The average value for the last quarter of an hour is determined from the measured values, saved and added up in the register of the respective temperature or humidity range. The Radio transmission occurs every 20 seconds for wireless M-Bus and hourly for LoRaWAN®. Performance features (selection):  Measurement, display and data transmission of temperature and humidity values Data transmission via wireless M-Bus or LoRaWAN® Battery life up to 10 years + storage reserve Internal antenna Plug & Play – commissioning mode Optical interface for configuration and reading of stored data Wall mounting with sealing option   Sensor technology: Temperature measurement range: -20°C to 50°C Measuring accuracy: ±0.3°C in the range from 5°C to 50°C Humidity measuring range: 0% to 100% RH Measuring accuracy: ±2% RH in the range of 20% to 80% Resolution of the measured values: 0.1°C and 0.1% RH