Scalable IoT LoRaWAN® Outdoor Gateway KONA Macro 868 MHz from TEKTELIC. Backhaul via 4G cellular or Ethernet connection, without geolocation The KONA Macro IoT Gateway is an ideal solution for operators and enterprises that require a very scalable low cost LoRaWAN® gateway that minimizes network TCO while improving coverage and capacity. In order to facilitate rapid deployment, the gateway is designed to be extremely compact and light weight. With the cellular modem embedded internally the KONA Macro is targeted at network sites that dictate a small form factor and low power consumption. Rated IP67 it is designed for the most demanding outdoor installations. The KONA Macro can be installed in various locations reducing site and deployment costs while addressing different vertical IoT applications. Product features and benefits: Optimize coverage and capacity with a cost-effective and extremely compact LoRaWAN® gateway. Quick and easy deployment made possible with custom mounting options, including utility pole, lamp post, tower, roof or wall mounts. Reduce set-up costs with plug-and-play installation utilizing the custom provisioned factory image. Lower site operational costs due to low power consumption and passive cooling. High availability carrier grade design with support for in-service configuration and software updates. Excellent out-of-band rejection of Interference from other networks such as Cellular and Paging. Fully integrated with the broad eco-system of LoRa™ network servers and sensors. Technical data: EU868 Frequency Duplex 16 Rx / 2 Tx (NA) Time Duplex 16 Rx / 2 Tx (Int.) Integrated Band-pass Filter Integrated 3G/4G Antenna Precise Network Synchronization (GPS) 27 dBm Tx Power27 dBm Tx Power Hardended Carrier Grade Enclosure Backhaul Connectivity (ETH / 3G / 4G) Versatile Mounting Options Required accessories (sold separately): TEKTELIC LoRaWAN® Antenna 2.5/3 dBi for KONA Macro Outdoor Gateway TEKTELIC Antenna Cable N-Male to N-Female 1m for KONA Macro Outdoor Gateway LevelOne PoE Injector for Tektelic KONA Macro Outdoor Gateway Please note: The accessories required for the TEKTELIC KONA Macro LoRaWAN® Outdoor Gateway in the form of PoE injector, antenna and antenna cable are not included in the scope of delivery of the gateway and must be purchased separately in our store. You can find them in the "Accessories" tab below.

Kerlink Wirnet iStation 4G IoT LoRaWAN® Outdoor Gateway 868 without PoE Injector Note:  An additional PoE adapter is required to operate the iStation! see (ArtNR: 169942) or choose the Art NR 173007 GW including  PoE Adapter Kerlink Wirenet iStation is the next generation of gateways and with its 8 channel RX (125 kHz, multi Spreading Factor) + 1 channel RX (250KHz) or 500kHz, mono Spreading Factor) + 1 channel RX (FSK) for 10 channels RX + 1 channel TX it is more compact and powerful than its predecessor. Thanks to its long range, the Wirnet iStation enables a secure and robust connection between sensor and information system.The Wirnet Station series enables a robust and reliable network implementation under LoRaWAN® for M2M & IoT connectivity service providers.It forms the centrepiece of the IoT (Internet of Things) network solution and enables fast and secure data transmission between the connected object and the information system. Attention: Not compatible with the Helium network! Use Cases: Outdoor LoRaWAN Netzwerk Infrastructur PoE or external power supply for temporary site tests  

Lean Wirnet iFemtoCell LoRaWAN Indoor Gateway from Kerlink The Wirnet iFemtoCell is a smart, configurable and performant indoor LoRaWAN gateway for smart IoT network. Based on LoRa technology, this gateway is perfectly designed for indoor public network extension (additional coverage in buildings to densify public network availability and continuity of service) or for ad-hoc indoor private coverage, like manufacturing, logistics or industrial sites requiring continuous connectivity for their IoT applications. Available in most global unlicensed frequency bands (like ISM ones), this cost-effective gateway is proposed through a compact and full featured casing. Easy to configure, it offers multiple options for backhaul like Ethernet, WiFi or WAN. Used as a hub to connect end devices, it can power various in-building enterprise applications like assets monitoring, energy consumption control, security enforcement or any other operation-critical data collection in various environment (buildings, factory, industrial sites, farms, harbors, airports, mines, ...). This LoRaWAN gateway leverages the same successful LoRa RF technical design as its carrier-grade predecessor, the Wirnet Station, and offers high performance for very deep indoor coverage in demanding environments (basement, underground, parking, elevators shafts…) to connect energy meters, parking sensors or equipment actuators. This long-range and low-power gateway offers 49 LoRa demodulators over 9 channels and comes with exclusive features for its remote monitoring and management with Kerlink network operations solutions, the Wanesy Management Center. The Wirnet iFemtoCell is also compatible with the Wanesy Small Private Network solution to deploy standalone and self-operating LoRaWAN private network. Attention: Not compatible with the Helium network! Strengths: Carrier grade, robust, modular and scalable indoor LoRaWAN Gateway Low Power consumption and Wide Area coverage (15+km in semi-urban area and 2km in urban area) High capacity and reliability, for deep indoor bidirectional communications handling high volumes of end-points and messages. Light infrastructure, easy to install and fast to configure. High interferences-resistance with built-in band bass filters for better data transmission and permanent high availability. Technical features: CPU & Memory: Powerful processor ARM processor with hardware watchdog and optimized power consumption management DDRAM 256 MB / 8 GB eMMC Operating System: LoRa Packet Forwarder, Linux OS, embedded base station controller (Wanesy Management Center remote management) Software packages and development tools included Networking: Firewalling, routing, networking and tunneling features Security: Secure boot, trust zone, firewall, software auto-recovery and secure firmware remote upgrade. Mechanical: Quality plastic enclosure, weight less than 500 g. RJ45, Jack, SMA/RP-SMA, USB port and host secure interface Power: Power supply 230VAC/12VDC with provide connector Communication: 49 LoRa demodulators over 9 channels. Omnidirectional 3 dBi external antenna. Wide coverage and very deep indoor coverage (undergrounds, basements, lifts shafts…) based on LoRa specifications. Supported ISM bands: EU 863-870 MHz, India 865-867 MHz, US 902-928 MHz FCC, AS 923 MHz. Backhaul connectivity over Ethernet, WLAN with built-in antenna. WWAN in option (USB dongle). Environment: Full operating range, humidity tolerance for indoor use only. Certified for Ingress protection / Impact Resistance / Flammability rating. Remote management: Remote alarm notification, firmware upgrade, file transfer, configuration, radio monitoring and statistics (Wanesy Management Center) Certification: EU / FCC / IC / ETSI certified.

DEOS SAM CO2 Air Quality LoRaWAN® The DEOS SAM CO2 room air sensor from DEOS AG measures the temperature, humidity and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. The number and colours of the LEDs change depending on the CO2 content (ppm). The data is transmitted to the corresponding backend via LoRaWAN®. An external power supply is provided via a mini-USB connection - the cable and the power supply unit are included in the scope of delivery.   Areas of application Schools, workplaces Offices, event rooms Smart buildings Warning function Visual and audible alarm when CO2 limits are exceeded (limits can be set individually) Optical temperature display by LEDs

KONA Micro IoT LoRaWAN® Indoor Gateway 868 MHz from TEKTELIC with build-in battery backup The Lora Gateway KONA Micro was developed for setting up mainly indoor LoRaWAN® networks. It is ideal for the housing industry, for corporate applications and can also be used in the industrial sector, precisely where "Always On" connectivity is required for IoT solutions. The gateway is equipped with an internal 3G/4G modem and a four-hour battery backup and continues to work in the event of a power failure. It is easy to configure and inexpensive, it is an ideal gateway for the provision of applications in the housing industry or at company level in areas in which, for example, LoRaWAN® coverage through outdoor gateways is not yet available.

LoRaWAN door contact sensor Clos'O 868 MHz. Clos'O is a LoRaWAN® Sensor that determines if a gate is properly closed. Installed on the frame (or on the fixed part, it detects the position of a magnet fixed on the gate moving part. The sensor reports on a public or private LoRaWAN® radio network the open or closed state of the gate. An alert is transmitted if the sensor is dismantled. Use Cases for LoRaWAN door contact sensor Clos'O: checking the opening status of gates, portals, garage doors, etc. continuous monitoring of gates in fences along free surfaces on properties, near freeways, railroads and industrial sites Features and functions: LoRaWAN®, Class A autonomous sensor Detection distance: up to 35 mm Alarm on removal of the sensor very easy installation more than 5 years autonomous operation designed for outdoor use 868 MHz (other frequencies on request)

Versatile LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor for measuring the indoor climate in an inconspicuous housing for simple wall mounting.

Sentinum FEBRIS CO2 air quality meter LoRaWAN® The FEBRIS CO2 air quality meter from the manufacturer Sentinum measures the temperature, humidity, pressure and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. As a special feature, the sensor with KNOCK-KNOCK function (manual) can trigger an immediate measurement. The data is transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY: Simply selsect the ZENNER IoT PLUG&PLAY Option by clicking on the selection box. Selecting the function ensures that your purchased Sentinum FEBRIS CO2 air quality meter LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser. Areas of application Schools and office complexes Industry and production Warehouses and halls Smart buildings Warning function Visual and audible alarm when CO2 limits are exceeded (limits can be set individually)

Watteco Smart Plug LoRaWAN® Radio Socket for energy monitoring Smart Plug is a LoRaWAN® Class C smart home device that monitors, controls, reports, home's electronics appliances connected and electrical line quality. Product Details: Up to 3,500W and 16A Monitoring & Report: Power, Energy, Voltage & Frequency Power supply via mains voltage Dimensions 114x62x40mm RF TRANSCEIVER Frequency (MHz) EU: 863-870 Transmit Power (dBm) +14 Receiver Sensitivity (dBm) -140 FIRMWARE Protocol: LoRaWAN®, Class C Transmission cycles: 10mn, 1h, 12h or defined by network Activation method: Activation by Personalization (ABP) Over-The-Air Activation (OTAA) Data encryption: AES128 ELECTRICAL Operating voltage (VAC): 100-250 Power frequency (Hz): 50-60 Max load capacity: 16A/250VAC POWER METER Active/Reactive Power resolution (W / Var): 1 Active/Reactive energy resolution (W.h / Var.h): 1 Power accuracy: < 1% above 40W >1% below 40W Energy measurement bandwidth: 1,23kHz QUALITY LINE INDICATOR Frequency: current/min/max values RMS Voltage: current/min/max values Over voltage: Number of occurrence the voltage exceed the overvoltage threshold Sag: Number of occurrence the main voltage is lower than the “Sag voltage Threshold” for at least the number of half cycle defined by the “Sag cycle Threshold” attribute INTERFACE LED Indicator: Configuration and pairing Button: Reset, ON/OFF MECHANICAL FEATURES  Dimension (mm): 62x114x40 Plug Type: Europe (optional US version) ENVIRONMENTAL Operating temperature (°C): -20 / +50 DIRECTIVES & STANDARDS EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE, FCC part 15.247 subpart C, RoHS recommendation compliant    

LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor to measure the indoor climate (CO2, temperature, humidity) in an inconspicuous housing for easy wall mounting. Compared to the ERS CO2 sensor, the ELSYS ERS CO2 Lite does not need to detect brightness and movement and is therefore the ideal sensor for measuring the indoor climate.

LoRaWAN® based GPS Tracker from TEKTELIC for industrial Asset Management. The KONA Industrial GPS Tracker provides GPS-enabled real-time location of fixed and mobile assets over LoRaWAN®. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments, with an operable temperature range of -40°C to +65°C. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments and an optional BLE integration. The device contains 2x D Cell batteries for optimal battery life of up to 8-10 years. The unit is equipped with an accelerometer to accommodate event-based start-up, minimizing unnecessary battery usage. Key product features: 8-10 year battery life Precise GPS Data transmission via LoRaWAN Rugged IP67 design Accelerometer Internal antenna Class A Further technical information is contained in the manufacturer's datasheet, which you can find below under "Related Links".

Lobaro LoRaWAN® GPS Sensor / Tracker The Lobaro LoRaWAN GPS-Tracker is ideal for determining the position of vehicles (trucks, cars), containers, construction site material or your own product. Due to the flexible firmware and the integrated GPS, temperature and vibration sensors, different scenarios can be covered. Any combination of timer, position / vibration and temperature can be used to query the data. The waterproof housing and the energy-saving architecture (< 25uA standby current with GPS in standby, thus fast restart possible) allow maintenance-free running times of several years - even outdoors. In field trials, more than 30,000+ LoRaWAN messages could be achieved at SF11 with one battery set. Lateral mounting straps allow a stable mounting of the GPS tracker. If required, external energy sources can also be connected. The Lobaro LoRa GPS Tracker has already been successfully used for various applications and is constantly being further developed. Accessories required for configuration: Lobaro USB configuration adapter (sold separately), see tab "Accessories" or part number 166644 For power supply you furthermore need two standard AA batteries (not included).

Skysens SKYAGR1 - Soil Moisture Sensor LoRaWAN® The Skysens SKYAGR1 is a cost-effective, easy-to-use LoRaWAN-based solution for monitoring soil moisture and temperature in landscaping, agriculture and other applications. The most important features are: Linear humidity measurement. Suitable for outdoor use. Excellent long-term stability. LED interface. Low power consumption compared to other technologies. Adjustable sensor measurement interval over network. Ready with end-to-end software application. Magnetic restart function. Description: Band LoRaWAN MHZ EU868 - Europe 868MHz; External antenna with +3 dBi; Temperature Sensitivity - 0.5°C (at -10°C to +85°C ; Humidity Sensitivity - 1% RH between 20% and 80%; Ambient conditions from -40ºC to +80ºC and 0% RH to 100% RH; Battery: 3.6V LiSOCl2 AA (changeable)

TEKTELIC Agriculture Sensor - Soil Surface Mount Module LoRaWAN® The Agriculture Sensor is a LoRaWAN® Class A device from the manufacturer Tektelic. The sensor measures soil moisture, soil temperature, air temperature and humidity, as well as ambient light. In addition, the sensor can detect motion and has a robust IP67 housing for use in the most difficult outdoor conditions. The sensor is powered by a C-cell LTC battery that is easily replaceable and provides a long battery life of up to 10 years. Several variants are available for the mounting options. Data is transmitted to the appropriate backend via LoRaWAN®. NOTE: The magnet for activating the sensor and the battery are included in the scope of delivery!   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased TEKTELIC Argiculture Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application Agriculture Agricultural technology Parks Smart CIty Nurseries Orchards Golf course

Dry Contacts - LoRaWAN® adapter with 4 x digital I/O and floating contacts Reporting 0-1 statuses and controlling relays. Function: Dry contacts Highlights: 4 configurable inputs/outputs Local and remote configuration Consumption controlled for optimized autonomy Develop new preventive maintenance services, alerts and analyses

Compact and easily installed LoRaWAN indoor sensor from ELSYS Configurable accelerometer for threshold values and status change with alarm function. Additional regular status messages with temperature, humidity and acceleration values.

VICKI LoRaWAN® Thermostatic radiator valve Vicki is the perfect solution for all those who are looking for an intelligent and efficient radiator thermostat, want to control it conveniently from anywhere and at the same time want to save a lot of energy costs.With Vicki, you can easily and conveniently regulate your room temperature, even remotely. The Vicki radiator thermostat is very easy to retrofit and monitors the temperature and humidity for you. You set the desired target temperature by simply turning the outer ring of the device. At the same time, the target temperature is displayed directly on the device and is easy to read. Vicki is so smart that it automatically detects when you open a window and temporarily regulates the radiator in that room down. This way, you never run the risk of wasting unnecessary energy when ventilating.Two lithium batteries are included in the delivery.To the whitepaper  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: VICKI LoRaWAN Measurement parameters: Temperature: +/- 0.20°C Humidity: +/- 2% RH Dimension: 54mm x 78mm x 50mm Operating conditions: -20°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: 2X AA Energizer Lithium L91 Battery replaceable: yes Battery life: up to 10 years

Optional Kerlink antenna set with 3dBi rod antenna for the Wirnet iStation. The LoRaWAN gateways of the iStation series from Kerlink have an integrated antenna as standard ex works. If the range of the internal antenna is not sufficient in practice, an external antenna can be retrofitted with this antenna set. The waterproof rod antenna (IP66K) is lightweight, has DC lightning protection and can be used under all conditions (e.g. strong winds). Scope of delivery: Rod Antenna 3 dBi Universal bracket 1 m coaxial cable

LoRaWAN® antenna (2.5/3 dBi) for connection to the TEKTELIC KONA Macro Outdoor Gateway. The antenna is omnidirectional with high gain and vertical polarization, designed for LoRa applications in the European 863-870 MHz ISM band. Product features: Omnidirectional pattern (360° in the horizontal plane) Vertical polarization Dipole radiation element 2.5 dBi gain For further information please refer to the data sheet in the download area below.

Dragino LDDS75 LoRaWAN Distance Detection Sensor The Dragino LDDS75 is a LoRaWAN Distance Detection Sensor for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data. The LDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server. The LoRa wireless technology used in LDDS75 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. LDDS75 is powered by 4000mA or 8500 mA Li-SOCI2 battery; It is designed for long term use up to 10 years*. Features: LoRaWAN 1.0.3 Class A Ultro low power consumption Distance Detection by Ultrasonic technology Flat object range 280mm - 7500mm Accuracy: ±(1cm+S*0.3%) (S: Distance) Measure Angle: 40° Cable Length : 25cm Temperature Compensation Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865 AT Commands to change parameters Uplink on periodically Downlink to change configure IP66 Waterproof Enclosure 4000mAh or 8500mAh Battery for long term use Applications:  Horizontal distance measurement Liquid level measurement Parking management system Object proximity and presence detection Intelligent trash can management system Automatic control, sewer Bottom water level monitoring 

Monitor home & office environment with TEKTELIC's LoRaWAN® Smart Room PIR Sensor (EU-868). The KONA Smart Room Sensor integrates practical functionality into a very small form factor. The Smart Room PIR Sensor is an ideal solution for holistically monitoring the home and office environment, whether measuring and reporting temperature, humidity, light, motion, vibration, open/closed doors and windows, or other user-defined functions. The sensor is optimized for long battery life and excellent transmission performance. It is fully Over The Air (OTA) configurable by the user for custom applications, behaviors, thresholds, trigger events, and reports, so you can implement many different smart home IoT applications with the same device. There are two variants of the KONA Smart Room Sensor. Once the PIR variant (motion detection) shown here and the BASE variant. The latter can also be found in our store under item number 173400 as well as following in the "Similar items" tab. Advantages & Features: User configurable parameters and thresholds Designed for optimal battery life (see table in datasheet) Easy wall, ceiling or table mounting Easy deployment with slim design Very small form factor IP30 Ingress Protection Functions & Applications: Motion detection (doors, windows, drawers) - Reed switch (magnet is required) G-force measurement (adjustable trigger) Motion detection (PIR) Light detection (on / off) Temperature measurement Humidity measurement Technical data: Dimensions: 42 x 42 x 17 mm Weight: 25 g Protection class: IP30 Operating temperature: 0 - 60°C Battery type: CR2477 RF Power: 15 dBm RF Sensitivity: up to -137 dBm internal antenna LoRaWAN Class A

NETVOX R311FA Wireless Activity Detection Sensor LoRaWAN® The Netvox R311FA sensor is a LoRaWAN® Class A device and is equipped with an accelerometer that can be used to detect vibration or motion. As soon as the sensor detects motion or vibration, it triggers an alarm and sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, for example, you can directly receive an immediate email via the alarm and rule management. The Activity Sensor is battery-powered and has low energy consumption. It can be mounted using the double-sided adhesive tape already present on the housing. Areas of application: Smart Home Industrial equipment Security area/ Anti-theft device Indoor Central product features: Motion detection by acceleration sensor (accelerometer) Sensitivity of vibration intensity: 62.5mg OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab R311FA is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

ZENNER CO2 INDICATOR L868 ID A for LoRaWAN® The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK. Download CO2 Sensor Actility ZENNER Datacake Bundle Link to ThingPARK Actility ZENNER DataCake AirQuality Solution Use Cases Indoor Air Quality Smart Building Smart School Smart Office Smart Home Product Features Modern design Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status LED traffic light Integrated battery Configuration Over the Air (OTA) Evaluation of the CO2 measured values Range (ex works) Evaluation LED Farbe < 800ppm normal green 800 – 999ppm slightly increased yellow 1.000 – 1.399ppm high purple > 1.399ppm very high red The measuring ranges can be set individually via LoRaWAN® downlink. Specifications Model CO2 INDICATOR L868 ID A Weight 115g Size 63,6 x 46,0 x 54,6mm Display Size 59,9 x 49,9mm LoRaWAN® Klasse A Frequency 863 ~ 870MHz Transmit Power max. 14dBm Battery 2.000mAh Power Input 5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten) Operating Temperature 0 ~ 40℃ Operating Humidity 0 ~ 99%rH (nicht kondensierende Umgebung) CO2 Measuring Range 400 ~ 9.999ppm Accuracy of 400 ~ 2.000ppm --> ±50ppm Accuracy of 2.000 ~ 9.999ppm --> no guarantee    Scope of Delivery ZENNER CO2 Indicator L868 ID A for LoRaWAN User Manual USB-A to USB-C Cabel Notice: There is no 5V power supply included in the delivery.  You can use a commercially available smartphone USB-A power adapter, for this purpose.

Temperature and humidity sensor with LoRaWAN® or wireless M-Bus radio interface The Indoor T+H Sensor records the temperature and relative humidity of indoor spaces. The sensor supports the user in optimizing the heating and ventilation behavior. The current temperature and humidity values can be read on the device display at any time. The data collected and stored by the device is transmitted to downstream recording systems using wireless M-Bus or LoRaWAN® radio technology. This creates transparency regarding the heating and ventilation behavior in order to be able to derive possible efficiency and optimization measures. This data can be used, for example, to prevent mold formation. The temperature and humidity measurement takes place internally in the device every three minutes. The average value for the last quarter of an hour is determined from the measured values, saved and added up in the register of the respective temperature or humidity range. The Radio transmission occurs every 20 seconds for wireless M-Bus and hourly for LoRaWAN®. Performance features (selection):  Measurement, display and data transmission of temperature and humidity values Data transmission via wireless M-Bus or LoRaWAN® Battery life up to 10 years + storage reserve Internal antenna Plug & Play – commissioning mode Optical interface for configuration and reading of stored data Wall mounting with sealing option   Sensor technology: Temperature measurement range: -20°C to 50°C Measuring accuracy: ±0.3°C in the range from 5°C to 50°C Humidity measuring range: 0% to 100% RH Measuring accuracy: ±2% RH in the range of 20% to 80% Resolution of the measured values: 0.1°C and 0.1% RH