IMBUILDINGS B.V. IR People Flow Sensor Set LoRaWAN®   The LoRaWAN® IR People Flow Sensor Set from IMBUILDINGS B.V. is used to detect or monitor the flow of visitors. The infrared sensor pair is mainly used in shops, commercial or municipal buildings to ensure that not too many people are in a certain area. The LoRaWAN® IR People Flow Sensor Set works with horizontal infrared technology. The light barrier registers when people enter or leave a building or room. The two-part sensors are battery-operated, an external power supply or separate cable installation is not required. The optimum installation height for the two-part sensor is in the range of 125 cm and 140 cm. The maximum distance between the sensor and the corresponding receiver is 8 metres. The sensors are easy to install using screws or glue. A parser for use in the ZENNER ELEMENT IoT platform is available. Configuration such as the transmission interval can be carried out via the NFC interface. Attention: The batteries are not included in the scope of delivery.   Performance features:   Measurement parameters: People flow  Housing dimensions (H x W x D): 116mm x 69mm x 22mm  IP protection class: IP20  Ambient temperature range: 0℃ to 40℃  Ambient humidity: 0 to 95% non-condensing  Equipment class: Class A  Communication: LoRaWAN  Activation: via Button on the transmitter  Counting: Horizontal Bidirectional counting  Technology: Infrared technology  IR counting line: maximum 8 metres  Installation height for the two-part sensor: 125 cm to 140 cm  Power supply: 2x AA 1.5 V alkaline eachbattery (not included in delivery)  Rated voltage: 3V  Maximum power consumption: 60mA  Battery life: approx. 1 year  Configuration: with NFC via app from manufacturer  Available frequency: EU868  Measuring interval: 15 min (configurable via App)  Data availability: IOT platform

The Apollon-Q sensor from Sentinum stands for high-quality measurement results, as it combines optical distance measurement with a radar-based measurement principle. The LoRaWAN® sensor can be used for level measurements of up to three meters and is suitable for a wide range of applications, containers and materials. This also includes small containers such as waste paper baskets with suitable mounting area. Application areas: Waste management logistics Level measurement of liquids and inhomogeneous materials Key product features: Accurate measurement results through combination of different measurement technologies (optical measurement and radar) Opening detection by acceleration sensor (accelerometer) 3D level detection Robust housing Activation by app via NFC ("AtlasConnect") Technical data: Standard measuring range: 80 mm to 2000 mm Maximum measuring range: 30 mm to 3500 mm      Dimension (L x W x H): 109 mm x 53 mm x 33 mm Weight: 160g (including 2 batteries) Operating temperature: -20 °C - +85 °C Operating humidity: 20% - 95% IP protection class: IP66 Sensors for distance measurement: Radar and optical Technology: LoRaWAN® Frequency: EU868 Device class: Class A Downlink configuration: Yes Power supply: Rated voltage 3V (one or two batteries, depending on version) Operating time: 5 years (48 measurements and 24 transmissions/day)

Versatile LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor for measuring the indoor climate in an inconspicuous housing for simple wall mounting.

ELSYS ERS Sound LoRaWAN® multi-sensor for indoor climate and noise level A LoRaWAN room sensor for measuring the indoor climate with noise level in an unobtrusive housing for easy wall mounting.

Compact and easily installed LoRaWAN indoor sensor from ELSYS Configurable accelerometer for threshold values and status change with alarm function. Additional regular status messages with temperature, humidity and acceleration values.

The Elsys ERS is a LoRaWAN® room sensor for measuring the room climate (temperature, humidity), brightness and movement (PIR) in an unobtrusive housing for simple wall mounting.Technical specifications:Sensors for: Indoor climate (temperature, humidity), light and motion (PIR)Ranges up to 8km (depending on ambient conditions, spread factors, etc.)NFC for flexible configuration via Android appAccuracy: ± 0.5°C, ±2%rhResolution: 0.1°C, 0.1%rhBattery life approx. 5-10 years (depending on interval configuration)1 or 2 x 3.6V AA lithium batteries (replaceable)Size 86x86x26mm Batteries not included.

SENSATIVE Strips Presence for LoRaWAN® The Strips Presence by SENSATIVE is an ultra-thin (3mm) active IR occupancy sensor for offices and buildings. The sensor monitors e.g. desk occupancy by measuring objects and people at close range (configurable up to 50cm). The minimalist design as well as the easy installation (adhesive back) and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The active IR sensor is activated ex works. In addition, the integrated magnetic sensor can be activated to monitor doors and windows. The data and measured values are transmitted to the corresponding backend via LoRaWAN®.   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Presence is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Office Smart School Smart Building Smart Home Performance features: Model: Strips Presence Measurement parameters: Active IR (infrared) occupancy sensor Configurable: magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor Mounting: adhesive backside LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

NETVOX R311FA Wireless Activity Detection Sensor LoRaWAN® The Netvox R311FA sensor is a LoRaWAN® Class A device and is equipped with an accelerometer that can be used to detect vibration or motion. As soon as the sensor detects motion or vibration, it triggers an alarm and sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, for example, you can directly receive an immediate email via the alarm and rule management. The Activity Sensor is battery-powered and has low energy consumption. It can be mounted using the double-sided adhesive tape already present on the housing. Areas of application: Smart Home Industrial equipment Security area/ Anti-theft device Indoor Central product features: Motion detection by acceleration sensor (accelerometer) Sensitivity of vibration intensity: 62.5mg OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab R311FA is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser