Important information!
Our warehouses will be closed from Wednesday 11 December until 2 January 2025.
Last order possibility for a delivery in the current year is Monday 09.12.2024.
Thank you for your understanding!
Go to homepage
Wishlist
€0.00*
EU-Shipping
Ready for dispatch within 24h
Different payment methods
Service +49 711 9491 2200

ZENNER configuration and readout tool MinoConnectUSB Set Opto

Optokopf zur Konfiguration und Auslesung
Optokopf zur Konfiguration und Auslesung
Product number: 126030
Manufacturer: ZENNER
EAN: 4001471287491
Weight: 0.25 kg

MinoConnectUSB and optical head - Set for configuration and readout of ZENNER devices

Set for mobile reading and configuration of ZENNER measuring devices and sensors.

The "MinoConnectUSB Set Opto" is mainly used to read out and parameterize ZENNER devices via the optical interface.

The two-part set consists of the "MinoConnectUSB", which is connected to a Windows mobile device or Laptop via USB, and the ZENNER IrDA "IrCombiHead" optical head. This is positioned on the optical interface of the respective ZENNER measuring device or sensor. The connection between MinoConnectUSB and the opto head is made via a SubD9 connector.

Using the additional configuration and readout software MeteringSystemSolution (MSS) - in combination with the MinoConnectUSB Set Opto - the settings required on the device can be conveniently made from the Windows laptop or mobile device

Features of MinoConnectUSB:

  • USB / RS232 and RS485 interface
  • LED operating status
  • In conjunction with the ZENNER IrCombiHead, it supports the IEC 62056 (1107) and IrDA interfaces, the IEC 62056 (1107) and IrDA interfaces

Additionally required configuration software MSS:

Please note that the configuration software MSS is required to configure and read out ZENNER LoRa devices. This can be downloaded free of charge as a demo version. You will find the link below under "Related links".

Properties "ZENNER configuration and readout tool MinoConnectUSB Set Opto"
device type: Accessories
industry: Buildings & Facilities, Housing Industry, Local and district heating, Public & Private Utilities, Smart Building, Smart City
location: Indoor, Outdoor
ZENNER PDC-communication module LoRaWAN 2-Channel pulse adapter
ZENNER PDC-communication module LoRaWAN 2-Channel pulse adapter
ZENNER PDC communication module LoRaWAN® 2-channel pulse adapter PDC communication module for integration of meters with pulse output into radio systems. Radio interface: LoRaWAN Sending interval: daily  With the PDC communication module (PDC = PulseDataCapture) you can integrate measuring devices with pulse output into modern wireless readout systems. The consumption data of water, heat, gas, oil or electricity meters with pulse output are transmitted wirelessly to a LoRaWAN™ network.The PDC communication module is battery operated. The battery life is up to 10 years depending on the version, transmission interval and ambient conditions. Typical applications: Radio readout of meters via LoRaWAN™ Modellvarianten: The PDC communication module is available in two versions: wireless M-Bus radio module according to OMS standard 4.0.2 (encryption mode 5), 868 MHz, EN 13757-4 (Order no. on request) LPWAN radio module (LoRaWAN™) Tip: Both potential-free (reed) contactors and electronic pulse outputs can be connected to the PDC. When connecting the PDC module to meters with electronic pulse output, we recommend that a compatibility test be carried out. Zusätzlich erforderliches Zubehör: To configure the PDC module, the special MinoConnectUSB and ZENNER IrDA optical head and the ZENNER software license MSS Configurator are required. The MinoConnectUSB set with optical head can be found in the "Accessories" tab below. The link to the free four-week demo version of the MSS software can also be found below under "Further links".
Manufacturer:

€49.00*
This website uses cookies to ensure the best experience possible. More information...