Radiator control - smart, economical and efficient
Welcome to the world of smart heating control with Vicki - a radiator thermostat that combines smart features with efficient energy consumption. Vicki is ideal for anyone looking for a convenient and smart way to control their radiators from anywhere, while saving significant energy costs. With Vicki, you can effortlessly and conveniently regulate the room temperature - even when you're not at home. Easy to retrofit, this device takes responsibility for monitoring the temperature and humidity in your home to ensure an optimal comfort environment. The desired target temperature is set by simply turning the outer ring of the unit. At the same time, the target temperature is displayed directly on the unit - clear and easy to read. What makes Vicki special is its ability to adapt to your lifestyle. This thermostat automatically detects when you open a window and temporarily turns down the heating in that room. This ensures that no unnecessary energy is wasted when ventilating. With Vicki, you not only ensure optimal comfort, but also contribute to environmental protection through efficient energy saving. Discover our selection of Vicki radiator thermostats and experience the revolution in heating control.
Module 1: B.One IoT GatewayPLUS with LoRaWAN® network
When you purchase a B.One IoT GatewayPLUS Indoor, Outdoor or SMART, you will receive preconfigured access to the LoRaWAN® network EUROPE from ZC GmbH for 12 months and 50 devices to make your LoRaWAN® sensors known in the network and receive their data there. For INDOOR and OUTDOOR, data is transmitted via an integrated SIM card; for SMART, you need an available WLAN network with an Internet connection. You can find more information on the respective product pages of the devices.
Tip
B.One GatewayPLUS SMART with LoRaWAN® network
Regular price:
€124.95
Powerful Indoor GatewayPLUS SMART in the LoRaWAN® Network EUROPE of ZENNER Connect
The B.One IoT GatewayPLUS SMART uses powerful LoRaWAN® technology, whose excellent building penetration and wide-area network coverage ensure connectivity of IoT sensors even under difficult environmental and installation conditions.
This indoor gateway is ideally suited for receiving your LoRaWAN® devices and sensors inside a building and in the immediate vicinity, in order to receive the values of sometimes difficult-to-access sensors on several floors as well as basements, garages, gardens, car parks - all without additional repeaters. It can be used across all sectors for a wide range of IoT applications.
The smart gateway ensures the LoRaWAN® reception of your LoRaWAN® end devices in the reception area of the gateway and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN® network EUROPE. Like all data transmissions, of course, secure and AES 128 encrypted.
The GatewayPLUS SMART gives you access to the ZENNER Connect LoRaWAN® network EUROPE. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system B.One Datahub. You therefore do not have to integrate the gateway into the system yourself. The access to your personal B.One Datahub account/client that you receive after ordering is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors).
The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect LoRaWAN® network EUROPE, you only need to establish the power supply, connect the gateway to your WLAN and you can start immediately. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 12 months. Data transmission from your gateway to the backend system via your WLAN connection may incur additional costs. If you are planning a larger project, please contact us. We will be happy to provide you with individual support and advice.
Scope of use B.One GatewayPLUS SMART:
With the B.One GatewayPLUS SMART you receive LoRaWAN® connectivity and data transmission via your Wi-Fi in the ZENNER Connect LoRaWAN® network EUROPE for 12 months and use of up to 50 LoRaWAN® IoT sensors.
The gateway is part of the LoRaWAN® network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN® end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider via your Wi-Fi! Of course, you only receive the data of your own end devices!
Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.
User Agreement B.One GatewayPLUS SMART:
Please note: This associated user agreement (also to be found below under "Available Downloads") is part of the contract when purchasing this gateway.
LoRaWAN® network coverage ZENNER Connect:
To the overview map of our network coverage: https://www.mz-connect.com/netzabdeckung/
NEW OPTIONAL: Order the B.One Gallery visualisation solution for 12 months and for 50 devices with ZENNER IoT PLUG&PLAY directly.
Would you like to get access to B.One Gallery and view your sensor data in a visually appealing format on the visualisation platform? Then simply order B.One Gallery as well. When you purchase the ‘B.One Gallery’ item, you will receive access for 12 months and can connect up to 50 sensors. You can find more information about B.One Gallery here.
User agreement for the visualisation solution B.One Gallery:
=> Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.
Exchange and inspiration in the B.One Community
Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you!
Join the B.One Community
Features and functions of GatewayPLUS Smart
Suitable for LoRaWAN® IoT solutions
ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator.
Gateway use ONLY in the following countries of the European Union:GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.
Bidirectional LoRaWAN® radio communication
Secure encrypted data transmission end-to-end (AES 128)
No storage of sensor data such as meter reading values on the gateway
LoRaWAN® gateway modules according to reference architecture 1.5
Connection to the backend with available WLAN network.Attention: The customer establishes the data transmission from the gateway to the backend via his own internet connection. This may incur additional costs for data transmission.
Please note: The reception quality and range of your LoRaWAN® gateway depends on the installation location you have chosen. For details, please refer to the installation instructions or the User Guide.
The average reception coverage inside a building can be up to 8-10 floors, depending on the building characteristics.
The reception coverage outside the building where the gateway is mounted can be up to 1 kilometer.
You will need WLAN connectivity at the gateway's mounting location. For operation you need a standard 230V power connection/socket.
Declaration of Conformity (CE) and RoHS standards are complied with.
Areas of application:
Optimal for LoRaWAN® based IoT applications in buildings as well as in the building environment.
Smart Building / Home / Office / School / Parking
Indoor air quality measurement
Submetering
Technical data:
Backhaul: Wi-Fi 802.11 b/g/n, frequency band: 2.4 GHz, security: WPA/WPA2
LoRa Channel: 8 channels, receive sensitivity: -140dBm, internal antenna
TX power: up to +20dBm
Frequency: EU-868 (862 - 870MHz)
Power supply: 230V power outlet (Euro plug) / USB Type-C (900mA).
Antennas: Internal - 1 x LoRa, 1 x Wi-Fi
Protection class: IP40
Housing: Plastic with flame retardant according to UL94-2013 Rev.9-2019, class.: V-0
Dimensions [L x W x H]: 100 x 82 x 38 mm
Weight: 160g
Operating temperature: 0 °C to +40 °C
Storage temperature: -40 °C to +70 °C
LED: Wi-Fi status
Preconfigured and connected to the ZENNER Connect LoRaWAN® network.(this is NOT changeable!)
Mounting: power socket
Standards: CE, RoHS
B.One GatewayPLUS Indoor with LoRaWAN® network & internal antennas
Regular price:
€369.00
Powerful Indoor IoT Gateway in the LoRaWAN® network EUROPE from ZENNER Connect GmbHThis B.One GatewayPLUS Indoor utilises the powerful LoRaWAN® technology, whose excellent building penetration and wide-area network coverage ensure the connectivity of IoT sensors even under difficult environmental and installation conditions.The gateway is ideal for receiving your LoRaWAN® devices and sensors within a building and in the immediate vicinity in order to receive the values of sensors that are sometimes difficult to access on several floors as well as in basements, garages, gardens and car parks - without any additional repeaters. The device can be used across all sectors for a variety of IoT applications.The B.One GatewayPLUS Indoor has already been installed in over 30,000 LoRaWAN® system installations of the Minol ZENNER Group and is an integral part of many B.One IoT system solutions. Thanks to its deliberately simple design, the gateway is barely noticeable in its surroundings.The gateway ensures the LoRaWAN® reception of your LoRaWAN® end devices in the gateway's reception area and transmits their data to the backend. In addition to receiving your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN® network EUROPE. Like all data transmissions, this is of course secure and AES 128 encrypted.The B.One GatewayPLUS Indoor gives you access to ZENNER Connect's LoRaWAN® network EUROPE for 12 months. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the B.One Datahub backend system. This means that you do not have to integrate the gateway into the system yourself. The access to your personal B.One Datahub account/client that you receive after ordering is ultimately only required for the creation of sensors whose data you wish to receive via the gateway.The gateway is therefore already fully and permanently preconfigured and an integral part of the ZENNER Connect LoRaWAN® network; all you have to do is connect it to the power supply. With the gateway, LoRaWAN® data transmission from 50 of your own LoRaWAN®
end devices is included in the purchase price for 12 months. Data transmission from your gateway to the backend system takes place via the ZENNER Connect SIM card included in the gateway. If you are planning a larger project, please contact us, we will be happy to support and advise you individually.Scope of use B.One GatewayPLUS Indoor:With the B.One GatewayPLUS Indoor you get LoRaWAN® connectivity and data transmission in the ZENNER Connect LoRaWAN® network EUROPE for 12 months and use of up to 50 LoRaWAN® IoT sensors.The gateway is part of the LoRaWAN® network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN® end devices in the reception area of your gateway are received in encrypted form and transmitted to the network provider. Of course, you only receive the data from your own end devices!Due to network regulation within the European Union, the gateway can currently ONLY be used in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.User agreement B.One GatewayPLUS IndoorPlease note: This associated user agreement (also to be found below under ‘Downloads’) is an integral part of the contract when purchasing this gateway.LoRaWAN® network coverage ZENNER Connect To the overview map of our network coverage: To the network coverageDISCOVER NOW: Order the B.One Gallery visualisation solution for 12 months and for 50 devices with ZENNER IoT PLUG&PLAY directly!Would you like to receive B.One Gallery access and view your sensor data visually on the visualisation platform? Then simply order the B.One Gallery as well. When you purchase the ‘B.One Gallery’ item, you receive access for 12 months and can link up to 50 sensors. You can find more information about the B.One Gallery here.User agreement for the B.One Gallery visualisation solution=> Please note when purchasing the B.One Gallery servicePlease note: This associated user agreement (also to be found below under "Downloads") is an integral part of the contract when purchasing the B.One Gallery (item number 801628).Exchange and inspiration in the B.One CommunityHave you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and want to exchange ideas? Or has your boss given you the task of immersing yourself in the Internet of Things? Then the new B.One Community is the right place for you! More about the B.One CommunityFeatures and functions of the GatewayPLUS IndoorSuitable for LoRaWAN® IoT solutionsZENNER Connect GmbH is the LoRaWAN® network operator for your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union: GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.Bidirectional LoRaWAN® wireless communicationSecurely encrypted end-to-end data transmission (AES 128) No storage of sensor data such as readings on the gateway LoRaWAN® gateway modules in accordance with reference architecture 1.5Automatic switch from mobile radio (already included) to Ethernet backhaul possible. Attention: If the gateway is connected to a LAN connection, the customer establishes the data transmission from the gateway to the backend via his own Internet connection! This may incur additional costs for data transmission! Therefore, use the connection via the integrated mobile phone data card/SIM, which is already included. This means you do not incur any additional data transfer costs! Please note: The reception quality and range of your LoRaWAN® gateway depends on the mounting or installation location you choose. For details, please refer to the installation instructions and further technical documentation.The average reception area within a building can cover up to 8-10 floors, depending on the nature of the building.The reception coverage outside the building in which the gateway is installed can be up to 1 kilometre. You need mobile phone coverage at the installation or mounting location of the gateway! Alternatively, a separate Ethernet connection. A standard 230V power connection/socket is required for operation.Manufacturer's declaration of conformity, including all applicable regulations on radio, low voltage and electricity from Europe and RED (Radio Equipment Directive)Areas of application Ideal for LoRaWAN® based IoT applications in buildings and in the building environment.Smart Building / Home / Office / School / ParkingSmart City / Smart IndustryIndoor air quality measurementTechnical dataMobile radio: Mini SIM - 2G, 3G (UMTS), 4G (LTE) - internal antenna Ethernet RJ45 - Priority over mobile radio Ethernet: RJ45 - priority over mobile radioLoRa Channel: 8 channels - internal antenna/-n TX power: max. 27 dBm (500 mW) conductedFrequency: EU-868 MHz Power supply: Internal power supply unitAntennas: Internal - 1 x LoRa, 1 x mobile radio Protection class: IP30Housing: Plastic with flame protection according to UL94-2013 Rev.9-2019, class: V-0Dimensions [L x W x H]: 18.4 x 12.7 x 4.8 cmOperating temperature: 0 °C to +50 °CStorage temperature: -40 °C to +80 °C LED: Power, LAN, CellularPre-configured and connected to the ZENNER Connect LoRaWAN® network (this is NOT changeable!)Mounting: Wall (bracket incl. screws and plugs included)Maintenance: Remote firmware upgrades are performed automaticallyCertification: EN 301 489-3, EN 300 220-2
B.One GatewayPLUS Outdoor with LoRaWAN® network
Regular price:
€989.00
Powerful Outdoor GatewayPLUS in the LoRaWAN® Network EUROPE of ZENNER Connect GmbH
The B.One GatewayPLUS Outdoor for building LoRaWAN®
coverage and realising IoT use cases.
The B.One GatewayPLUS Outdoor uses the powerful LoRaWAN® technology, whose excellent building penetration and wide-area network coverage ensure the connectivity of IoT sensors even under difficult environmental and installation conditions.
The outdoor gateway is ideal for LoRaWAN®
network coverage in rural and urban areas to receive readings from multiple sensors. The device can be used across divisions for a wide range of IoT applications and is an integral part of the B.One system solutions. With just a few gateways, entire cities can be covered. Thanks to the very robust housing made of painted aluminium, the outdoor gateway is very resilient to extreme weather conditions and is characterised by a high level of fail-safety. In addition to the two external LoRa antennas for the 16 Channels, the B.One GatewayPLUS Outdoor also uses an external LTE antenna to ensure the best possible connection to the backend - provided there is no Ethernet connection. This feature is not found in comparable competitor products.
The gateway ensures LoRaWAN®
reception of your LoRaWAN®
end devices in the gateway's reception area and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN® network EUROPE. Like all data transmissions, this is of course secure and AES 128 encrypted.
The B.One GatewayPLUS OUTDOOR gives you access to the LoRaWAN® network EUROPE of ZENNER Connect. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system B.One Datahub. You therefore do not have to integrate the gateway into the system yourself. The access to your personal B.One Datahub account/client, which you receive after ordering, is ultimately only required for the installation of sensors whose data you want to receive via the gateway.
The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect EUROPE LoRaWAN® network, you only need to establish the power supply. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 12 months. The data transmission from your gateway to the backend system is carried out via the SIM card of ZENNER Connect included in the Gateway. If you are planning a larger project, please contact us. We will be happy to support and advise you individually.
By the way: ZENNER includes everything you need to operate the gateway in the scope of delivery - from the mounting device to all antennas and cables.
Scope of use B.One GatewayPLUS Outdoor:
With the B.One GatewayPLUS Outdoor you receive LoRaWAN®
connectivity and data transmission in the ZENNER Connect network EUROPE for 12 months and use of up to 50 LoRaWAN®
IoT sensors.
The gateway is part of the LoRaWAN®
network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN®
end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider. Of course, you only receive the data of your own end devices!
Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.
Associated User Agreement B.One GatewayPLUS Outdoor:
Please note: This corresponding associated user agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway.
LoRaWAN® network coverage ZENNER Connect:
To the overview map of our network coverage: To the network coverage
NEW OPTIONAL: Order the B.One Gallery visualisation solution for 12 months and for 50 devices with ZENNER IoT PLUG&PLAY directly.
Would you like to get access to B.One Gallery and view your sensor data in a visually appealing format on the visualisation platform? Then simply order B.One Gallery as well. When you purchase the ‘B.One Gallery’ item, you will receive access for 12 months and can connect up to 50 sensors. You can find more information about B.One Gallery here.
User agreement for the visualisation solution B.One Gallery:
=> Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.
Exchange and inspiration in the B.One Community
Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you!
Join the B.One Community
Features and functions of the B.One GatewayPLUS Outdoor:
Suitable for LoRaWAN®
IoT solutions
ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator.
Gateway use ONLY in the following countries of the European Union: GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.
Bidirectional LoRaWAN radio communication
Secure encrypted data transmission end-to-end (AES 128)
No storage of sensor data such as meter readings on the gateway
LoRaWAN®
gateway modules according to reference architecture 1.5
Automatic switch from mobile radio (already included) to Ethernet backhaul possible,
Attention! If the gateway is connected to an Ethernet connection, the customer establishes the data transmission from the gateway to the backend via his own Internet connection! This may incur additional costs for the data transmission! Therefore, use the connection via the integrated mobile radio data card/SIM, which is already included. This way you will not incur any additional data transmission costs!
Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive).
Please note: The reception quality and range of your LoRaWAN gateway depends on the mounting or installation location you choose. For details, please refer to the installation instructions and the additional technical documentation.
You need mobile radio coverage at the installation or mounting location of the gateway! Alternatively, a separate Ethernet connection. For operation, you need a standard 230V power connection/socket!
Plug & Play - easy integration through pre-configured software
Security patches and software updates are distributed automatically
LoRaWAN®
gateway modules according to reference architecture 1.5
Automatic switch from mobile radio to Ethernet backhaul (if available)
Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive)
Application areas:
Optimal for outdoor IoT use cases
Smart City, Smart Parking, Smart Waste, Smart Lighting, ...
e.g. monitoring of local network transformer stations; shaft meter reading
Smart Industry, Retail, Logistics, SMB, Smart Agriculture & Farming, Asset Tracking...
Scope of delivery:
IoT Outdoor GatewayPLUS
2x LoRa antenna incl. antenna cable
1x LTE antenna incl. antenna cable
1x Ethernet cable (5m)
Mounting device incl. pole mount
PoE injector
Potential equalisation cable (earthing cable)
Cable tie
Technical data:
Mobile radio: Mini SIM - 2G, 3G (UMTS), 4G (LTE) - external LTE antenna
Ethernet: RJ45 - priority over mobile radio
LoRa channel: 16 channels - two external antennas
TX power: max. 27 dBm (500 mW) conducted
Frequency: EU-868
Power supply: Power over Ethernet (PoE)
Antennas: External: 2 x LoRa, 1 x LTE (antennas incl. holder included in delivery)
Protection class: IP67
Housing: Aluminium, lacquered
Operating temperature: 0°C to +50°C
Storage temperature: -40°C to +80°C
Mounting: Wall, pole (bracket incl. earth cable included, galvanised steel)
Maintenance: Remote firmware upgrades via ZENNER Cloud
Certification: EN 301 489-3, EN 300 220-2
Module 2: Add your sensors to the ZC network
To complete your use case, you will of course need one or more sensors. After purchase, you have the option of manually adding your sensors to the ZENNER Connect LoRaWAN® network EUROPE yourself.
Module 3: Control options for your Vicki radiator thermostat
For smaller installations: MClimate Enterprise & MClimate App
MClimate Enterprise is a building management platform that provides centralised control and analysis of IoT devices. Through a user-friendly interface, users can get an overview of buildings, assign devices and track key metrics to reduce energy costs and improve carbon footprint. In addition to the free MClimate App, end users can control their smart devices in customised ways, including through personal preferences or automatic geolocation settings. The app also offers detailed analytics, the ability to create schedules, receive notifications and set timers, and the option to share accounts.
More on the solution here.
Alternative: Control via Datacake
You have the opportunity to achieve significant cost savings and improved energy efficiency by integrating Mclimate Vicki valves and the Datacake IoT platform into your heating system. Using a LoRaWAN gateway, you can connect to the Datacake platform for real-time visualisation of temperatures and valve conditions. Key features to reduce costs is the implementation of automations and logics on the Datacake platform, including automatic weekend heating shutdown. These adjustments help to reduce energy consumption during periods of low occupancy and take advantage of IoT technology.
More information can be found on the Datacake-Website.
For larger projects: ZENNER BUILDINGLINK & MCLIMATE VICKI
The new smart building solution offers a range of features that help save energy and costs while supporting climate protection and compliance with new regulations in the building sector. The solution offers a modular configurable bundle that uses existing LoRaWAN® networks and includes:
- ZENNER IoT Plug & Play GatewayPLUS and ZC Europe LoRaWAN® as a Service.
- Smart radiator thermostats MClimate VICKI
- Planning and installation service on request
- Free configuration of the devices
- Possibility to create individual heating plans and automation
- Control and monitoring of room temperatures in buildings with ZENNER BuildingLink
- Instruction, training as well as service and support
Further information and a contact form can be found at: To the PRODUCT-BUNDLE
Are you interested in IoT use cases beyond radiator control? Then discover our wide range of IoT PLUG&PLAY sensors for a wide variety of applications such as door sensors, motion, lighting, leakage or smoke alarms ... Expand your solutions now.
Skip product gallery
Tip
VICKI LoRaWAN® Thermostatic radiator valve robust white MCLIMATE
Regular price:
From
€69.90
Vicki is the perfect solution for anyone looking for an intelligent and efficient radiator thermostat that can be conveniently controlled from anywhere while significantly reducing energy costs.With Vicki, you can easily and comfortably regulate your room temperature – even remotely. The Vicki radiator thermostat is simple to retrofit and automatically monitors temperature and humidity for you.You can set your desired target temperature by simply turning the outer ring of the device. The selected temperature is clearly displayed directly on the device for easy reading.Vicki is smart enough to automatically detect when a window is opened and temporarily lowers the radiator output in that room. This ensures that you never waste unnecessary energy while ventilating.Two lithium batteries are included in the package.To the Whitepaper Product featuresManual adjustment of temperature2-digits displayAutomatic temperature control algorithmAutomatic temperature control algorithm with external temperature readingManual valve openness controlOpen window detectionChild lockDevice specifications:Technical name: VICKI LoRaWAN® Thermostatic radiator valve robust MCLIMATE L868Weight: 107gDimensions: 54x78x50mm Operating TEMPERATURE: -20-60°COperating humidity: 0-80% RH (non-condensing)Power supply: BATTERY TYPE 2xAA (included in the device)Expected battery life: Up to 10 years (depending on configuration and environment)Wireless technology: LoRaWAN® 1.0.3 - Supported LoRaWAN® regions EU863 – 870Default radiator valve fitting M30x1.5Applications:Smart BuildingsSmart homeResidential buildingsCommercial buildingsEnergy optimizationEnvironment monitoring
VICKI LoRaWAN® Thermostatic radiator valve robust black MCLIMATE
Regular price:
From
€69.90
Vicki is the perfect solution for anyone looking for an intelligent and efficient radiator thermostat that can be conveniently controlled from anywhere while significantly reducing energy costs.With Vicki, you can easily and comfortably regulate your room temperature – even remotely. The Vicki radiator thermostat is simple to retrofit and automatically monitors temperature and humidity for you.You can set your desired target temperature by simply turning the outer ring of the device. The selected temperature is clearly displayed directly on the device for easy reading.Vicki is smart enough to automatically detect when a window is opened and temporarily lowers the radiator output in that room. This ensures that you never waste unnecessary energy while ventilating.Two lithium batteries are included in the package.To the WhitepaperProduct featuresManual adjustment of temperature2-digits displayAutomatic temperature control algorithmAutomatic temperature control algorithm with external temperature readingManual valve openness controlOpen window detectionChild lockDevice specifications:Technical name: VICKI LoRaWAN® Thermostatic radiator valve robust MCLIMATE L868Weight: 107gDimensions: 54x78x50mmOperating TEMPERATURE: -20-60°COperating humidity: 0-80% RH (non-condensing)Power supply: BATTERY TYPE 2xAA (included in the device)Expected battery life: Up to 10 years (depending on configuration and environment)Wireless technology: LoRaWAN® 1.0.3 - Supported LoRaWAN® regions EU863 – 870Default radiator valve fitting M30x1.5
Applications:
Smart Buildings
Smart home
Residential buildings
Commercial buildings
Energy optimization
Environment monitoringApplications:Smart BuildingsSmart homeResidential buildingsCommercial buildingsEnergy optimizationEnvironment monitoring
Tekelek TEK766 Ultrasonic Level Sensor LoRaWAN
Regular price:
€143.90
Ultrasonic LoRaWAN Sensor Tek766 for tank level monitoring.
The LoRaWAN-based Tek766 is a battery powered, configurable ultrasonic level sensor with integrated wireless interface.
Use cases:
Monitoring of fill levels in tanks
Monitoring of fluid levels
Ensuring the continuous availability of fuels or other operating resources
Monitorable liquids:
Fuels
Heating oil
Kerosene
Water
Waste oil
and more
Benefits:
Accurate and reliable monitoring of tank levels
Alert when filling levels are below or exceeded
Optimization of procurement and delivery
Optimizing your logistics
Increase in process efficiency
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Tekelek TEK766 Ultrasonic Level Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
Technical characteristics:
Remote configuration
Easy installation
Up to 14 years of battery life
LoRaWAN radio interface (868 MHz)
Up to 15 km range
CE conformity and ROHS conformity
Netvox Water Leakage Sensor R311W Class A with LoRaWAN®
Regular price:
€57.90
R311W LoRaWAN® Leakage Sensor from Netvox to Prevent Water Damage
The Netvox R311W sensor is a LoRaWAN® class A device and enables the detection of water leaks. As soon as the sensor detects a leak, it sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, you can thus receive an immediate email via the alarm and control management and avoid major water damage.
Thanks to its small form factor, the device can be installed inconspicuously in almost any location.
Areas of application:
Data centers
Machine and server rooms
Pipelines in basements
Sanitary facilities
Keel rooms of ships
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Netvox R311W is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
Discount
SENSATIVE Strips Multisensor +Comfort for LoRaWAN®
Sale price:
€59.90
Regular price:
€99.95
(40.07% saved)
SENSATIVE Strips Multisensor MS +Comfort for LoRaWAN®
The Strips Multisensor +Comfort from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users.
From the factory, the sensor measures the temperature, humidity and brightness (LUX) of the environment. In addition, the integrated magnetic sensor for monitoring doors and windows can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®.
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor +Comfort for LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
Areas of application:
Smart Home
Smart Office
Smart School
Smart Building
Performance features:
Model: Strips MS +Comfort
Measurement parameters:
Temperature: +/- 0.40°C
Humidity: +/- 3% RH
Ambient light: 1-64000 LUX
Configurable: Magnetic sensor (door and window)
Dimension: 195mm x 15mm x 3mm
Operating conditions: -30°C to +60°C
Application area: Indoor
LoRaWAN® device class: Class A
Activation: OTAA
Configuration: Downlink
Frequency: Europe (863-870 MHz)
Transmit power: +14dBm
Transmission interval: configurable
Power supply: built-in LiMnO2 battery
Battery replaceable: no
Battery life: up to 10 years (Battery Calculator)
Accessories: +Switch, +Clip
Sensoneo Smart Waste Ultrasonic Sensor LoRaWAN Single 3.0
Regular price:
€208.90
Sensoneo Smart Waste level sensor Single 3.0 for monitoring the amount of waste.
The Sensoneo Single Sensor LoRaWAN is an enterprise-class sensor. Designed for various types of containers from high capacity to small containers, it meets the needs of the customers wanting the secure data transfer to cloud-based applications.
The ultrasonic sensors is able to monitor any type of waste in bins of various type and size. It is very robust, water and shock resistant and can be connected to any LoRaWAN.
Get real-time data on fill-level in bins.
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Sensoneo Smart Waste Ultrasonic Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
Discount
SENSATIVE Strips Presence for LoRaWAN®
Sale price:
€54.90
Regular price:
€99.95
(45.07% saved)
SENSATIVE Strips Presence for LoRaWAN®
The Strips Presence by SENSATIVE is an ultra-thin (3mm) active IR occupancy sensor for offices and buildings. The sensor monitors e.g. desk occupancy by measuring objects and people at close range (configurable up to 50cm). The minimalist design as well as the easy installation (adhesive back) and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The active IR sensor is activated ex works. In addition, the integrated magnetic sensor can be activated to monitor doors and windows.
The data and measured values are transmitted to the corresponding backend via LoRaWAN®.
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Presence is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
Areas of application:
Smart Office
Smart School
Smart Building
Smart Home
Performance features:
Model: Strips Presence
Measurement parameters:
Active IR (infrared) occupancy sensor
Configurable: magnetic sensor (door and window)
Dimension: 195mm x 15mm x 3mm
Operating conditions: -30°C to +60°C
Application area: Indoor
Mounting: adhesive backside
LoRaWAN® device class: Class A
Activation: OTAA
Configuration: Downlink
Frequency: Europe (863-870 MHz)
Transmit power: +14dBm
Transmission interval: configurable
Power supply: built-in LiMnO2 battery
Battery replaceable: no
Battery life: up to 10 years (Battery Calculator)
Accessories: +Switch, +Clip
Netvox Door & window contact sensor (reed) R718F with LoRaWAN®
Regular price:
€99.00
LoRaWAN® R718F Door & Window Contact Sensor (Reed) from Netvox for Monitoring Opening Conditions
The netvox R718F is equipped with a reed switch that can be used to detect the status "open" or "closed". Inside the magnetic range, the reed switch is switched on (conductive) and outside it is switched off (non-conductive). Thus, the module can detect the closing and opening signals. This makes the sensor ideal for monitoring doors and windows. Thanks to the built-in radio module, information and data can be sent wirelessly to the LoRaWAN® gateway. The door and window contact sensor is battery-operated and has low energy consumption.
Areas of application:
Monitoring of doors, windows and garage doors
Tracking of production lines
ELSYS ERS Lite wireless Multi room sensor for indoor climate measurement
Regular price:
€58.00
Low cost LoRaWAN sensor from ELSYS for indoor climate monitoring
The ELSYS ERS Lite is an affordable LoRaWAN room sensor for measuring the indoor climate (temperature and humidity) in an unobtrusive housing for easy wall mounting.
Tip
WILSEN wireless ultrasonic sensor WS-UCC4000
Regular price:
€329.90
Wireless ultrasonic sensor with LoRaWAN® interface WS-UCC4000
The wireless ultrasonic sensor can be used for remote monitoring of fill level.The fill level, but also other parameters such as geo data and sensor status data, are measured or recorded in configurable time intervals andtransmitted to a counterpart in the LoRa network from where they are available for pure display or further processing.The sensor is parameterised via a Bluetooth interface using a mobile device (smartphone or tablet) and the WILSEN app belonging to the sensor.
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased WILSEN wireless ultrasonic sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
Battery powered
Data transmission via LoRaWAN
LoRaWAN downlink channel for querying and adjusting parameter values
Bluetooth interface for commissioning, parameterization and diagnostics
