Greenbox Compact 3 - Intelligent LoRaWAN®-enabled timer for controlling street lighting Greenbox Compact 3 is an intelligent time switch with an astronomical calendar and LoRaWAN® radio interface. It is used for intelligent, modern control of street lighting. Greenbox Compact replaces existing conventional audio frequency ripple control receivers. The switching on and off of the connected street lighting is either controlled by the astronomical calendar stored in the Greenbox or by means of a LoRaWAN® command. The exact time is automatically synchronized between the server and the Greenbox Compact via the LoRaWAN® interface. Switching commands are transferred via the LoRaWAN® interface. The switching commands can either be sent to individual devices (single mast control) or as real synchronous group commands (string control). The parameterization of the Greenboxes can also be set and read out via the LoRaWAN interface. A current measurement checks the function of the consumer (e.g. defective lamp). Switching changes or errors are automatically sent as a LoRa message. The Greenbox Compact is 1: 1 connector compatible with standard ripple control receivers available on the market (e.g. Landis + Gyr RCR 131 or Langmatz EK 593) and complies with the current EN and IEC standards. Features: Can be used for single mast or group control Simple assembly as it is compatible with standard TRE's DIN rail mounting is possible as an option Automatic time synchronization Up to 8 switching programs available Integrated power measurement (enables functional testing of the consumer) USB-C interface for configuration Can also be used as a simple time switch without LoRaWAN® functionality Sealable LED operating status display Protection class IP32 Scope of delivery: Greenbox Compact 3 Accessories (to be ordered separately) Mast antenna with 4 m cable for mast diameter 80-140 mm (ANT140), Order number 172726 (see also tab "Accessories") optional: DIN rail adapter for Greenbox Compact (GBC3-DIN), Order number 173291 (see also tab "Accessories") optional: Standard SMA angled antenna (ANT100), Order number 173292 (see also tab "Accessories") Video on the ZENNER Youtube channel: LoRaWAN: Smart Lighting with the Internet of Things

LoRaWAN field tester for real-time network analysis and signal strength testing.  It allows the transmission, reception and immediate display of LoRaWAN messages and their quality/field strength in the network used. Use Cases: Coverage and range tests with geolocation of the measuring points Optimization of sensor locations / positions for assembly planning Selection of the most suitable network

Watteco Smart Plug LoRaWAN® Radio Socket for energy monitoring Smart Plug is a LoRaWAN® Class C smart home device that monitors, controls, reports, home's electronics appliances connected and electrical line quality. Product Details: Up to 3,500W and 16A Monitoring & Report: Power, Energy, Voltage & Frequency Power supply via mains voltage Dimensions 114x62x40mm RF TRANSCEIVER Frequency (MHz) EU: 863-870 Transmit Power (dBm) +14 Receiver Sensitivity (dBm) -140 FIRMWARE Protocol: LoRaWAN®, Class C Transmission cycles: 10mn, 1h, 12h or defined by network Activation method: Activation by Personalization (ABP) Over-The-Air Activation (OTAA) Data encryption: AES128 ELECTRICAL Operating voltage (VAC): 100-250 Power frequency (Hz): 50-60 Max load capacity: 16A/250VAC POWER METER Active/Reactive Power resolution (W / Var): 1 Active/Reactive energy resolution (W.h / Var.h): 1 Power accuracy: < 1% above 40W >1% below 40W Energy measurement bandwidth: 1,23kHz QUALITY LINE INDICATOR Frequency: current/min/max values RMS Voltage: current/min/max values Over voltage: Number of occurrence the voltage exceed the overvoltage threshold Sag: Number of occurrence the main voltage is lower than the “Sag voltage Threshold” for at least the number of half cycle defined by the “Sag cycle Threshold” attribute INTERFACE LED Indicator: Configuration and pairing Button: Reset, ON/OFF MECHANICAL FEATURES  Dimension (mm): 62x114x40 Plug Type: Europe (optional US version) ENVIRONMENTAL Operating temperature (°C): -20 / +50 DIRECTIVES & STANDARDS EN, 61000-4-2 EN 300-220-1 V2-4-1, EN 301 489 V1-6-1 CE, FCC part 15.247 subpart C, RoHS recommendation compliant    

Vicki is the perfect solution for anyone looking for an intelligent and efficient radiator thermostat that can be conveniently controlled from anywhere while significantly reducing energy costs.With Vicki, you can easily and comfortably regulate your room temperature – even remotely. The Vicki radiator thermostat is simple to retrofit and automatically monitors temperature and humidity for you.You can set your desired target temperature by simply turning the outer ring of the device. The selected temperature is clearly displayed directly on the device for easy reading.Vicki is smart enough to automatically detect when a window is opened and temporarily lowers the radiator output in that room. This ensures that you never waste unnecessary energy while ventilating.Two lithium batteries are included in the package.To the Whitepaper Product featuresManual adjustment of temperature2-digits displayAutomatic temperature control algorithmAutomatic temperature control algorithm with external temperature readingManual valve openness controlOpen window detectionChild lockDevice specifications:Technical name: VICKI LoRaWAN® Thermostatic radiator valve robust MCLIMATE L868Weight: 107gDimensions: 54x78x50mm Operating TEMPERATURE: -20-60°COperating humidity: 0-80% RH (non-condensing)Power supply: BATTERY TYPE 2xAA (included in the device)Expected battery life: Up to 10 years (depending on configuration and environment)Wireless technology: LoRaWAN® 1.0.3 - Supported LoRaWAN® regions EU863 – 870Default radiator valve fitting M30x1.5Applications:Smart BuildingsSmart homeResidential buildingsCommercial buildingsEnergy optimizationEnvironment monitoring