Bidirectional LoRaWAN® people counter Radar Peopleflow Sensor PCR2 Outdoor from Parametric. PCR2 is a camera-less people counting system for outdoor and indoor use with LoRaWAN connectivity. The system includes powerful signal processing that enables directional counting of humans. Counters are transmitted in regular intervals over a public or private LoRaWAN network. Technical details: Bi-Directional counting of persons passing by Integrated 24GHz Radar sensor with advanced signal processing No surveillance camera – no privacy issues Vertically (ceiling) or horizontally mountable Integrated Antenna Wide range power supply input 5-12 VDC or USB 5V LoRaWAN 1.0.2 Class A device LoRaWAN Region: EU868 UV protected and waterproof enclosure Slim-line design with hidden fixing points All Parametric Sensors are equipped with USB or NFC for easy configuration with a freely available configuration tools.

Detecting people flows with the Parametric Radar Peopleflow Sensor PCR2 Indoor (Bi-Directional) PCR2 is a camera-less people counting system for indoor use with LoRaWAN connectivity. The system includes powerful signal processing that enables directional counting of humans. Counters are transmitted in regular intervals over a public or private LoRaWAN network. Bi-Directional counting of persons passing by Integrated 24GHz Radar sensor with advanced signal processing No surveillance camera – no privacy issues Vertically (ceiling) or horizontally mountable Integrated Antenna Wide range power supply input 5-12 VDC or USB 5V LoRaWAN 1.0.2 Class A device LoRaWAN Region: EU868 PCR2 Bi-Directional People Counter Indoor 2 LEDs for counting signalisation Indoor version with slim line enclosure and hidden fixing points All Parametric Sensors are equipped with USB or NFC for easy configuration with a freely available configuration tools.

IMBUILDINGS B.V. IR People Flow Sensor Set LoRaWAN®   The LoRaWAN® IR People Flow Sensor Set from IMBUILDINGS B.V. is used to detect or monitor the flow of visitors. The infrared sensor pair is mainly used in shops, commercial or municipal buildings to ensure that not too many people are in a certain area. The LoRaWAN® IR People Flow Sensor Set works with horizontal infrared technology. The light barrier registers when people enter or leave a building or room. The two-part sensors are battery-operated, an external power supply or separate cable installation is not required. The optimum installation height for the two-part sensor is in the range of 125 cm and 140 cm. The maximum distance between the sensor and the corresponding receiver is 8 metres. The sensors are easy to install using screws or glue. A parser for use in the ZENNER ELEMENT IoT platform is available. Configuration such as the transmission interval can be carried out via the NFC interface. Attention: The batteries are not included in the scope of delivery.   Performance features:   Measurement parameters: People flow  Housing dimensions (H x W x D): 116mm x 69mm x 22mm  IP protection class: IP20  Ambient temperature range: 0℃ to 40℃  Ambient humidity: 0 to 95% non-condensing  Equipment class: Class A  Communication: LoRaWAN  Activation: via Button on the transmitter  Counting: Horizontal Bidirectional counting  Technology: Infrared technology  IR counting line: maximum 8 metres  Installation height for the two-part sensor: 125 cm to 140 cm  Power supply: 2x AA 1.5 V alkaline eachbattery (not included in delivery)  Rated voltage: 3V  Maximum power consumption: 60mA  Battery life: approx. 1 year  Configuration: with NFC via app from manufacturer  Available frequency: EU868  Measuring interval: 15 min (configurable via App)  Data availability: IOT platform

LoRaWAN door contact sensor Clos'O 868 MHz. Clos'O is a LoRaWAN® Sensor that determines if a gate is properly closed. Installed on the frame (or on the fixed part, it detects the position of a magnet fixed on the gate moving part. The sensor reports on a public or private LoRaWAN® radio network the open or closed state of the gate. An alert is transmitted if the sensor is dismantled. Use Cases for LoRaWAN door contact sensor Clos'O: checking the opening status of gates, portals, garage doors, etc. continuous monitoring of gates in fences along free surfaces on properties, near freeways, railroads and industrial sites Features and functions: LoRaWAN®, Class A autonomous sensor Detection distance: up to 35 mm Alarm on removal of the sensor very easy installation more than 5 years autonomous operation designed for outdoor use 868 MHz (other frequencies on request)

Water Leak Sensor Rope  R718WB LoRaWAN R718WB is a non-locating leak detection wireless communication device. R718WB can detect the leak status through an external dual-core non-positioning water rope sensor, and send the detected data to data center through the wireless network. It uses the SX1276 wireless communication module. Main Features • Apply SX1276 wireless communication module • 2 section ER14505 batteries AA SIZE (3.6V/section) parallel power supply • Non-locating leak detection • Base with magnet attached to iron objects • LoRaWANTM Class A compatible • Frequency Hopping Spread Spectrum (FHSS) • Improved interference immunity • Improved power management for longer battery life and set alerts via SMS text and email (optional) • The base is attached with a magnet that can be attached to a ferromagnetic material object

Leak Kairos Noah N2-OTAA-01 L868 OD AThe Noah Multifunction Leak Sensor constantly monitors for the presence of water where you don't want it! Several wide-area leak detection membrane formats are available for your specific use case: water heaters, HVAC, washing machines, and refrigerators, to name a few. Each sensor communicates through several floors as well as across a multifamily property due to the use of the highpenetration, long-range, low-power properties of the LoRa radio protocol. You'll be able to see where water is, and isn't, on your property. Early detection can save thousands in damages. The largest membranes (50,8 x 50,8 cm & 50,8 x 76,2 cm) can be connect up to 18 in series and 2 in parallel simultaneously. The combination results in 36 membranes in total. These are connected with typical membranes utilize the two-pin LED connectors/splitters.DISTINGUISHING FEATURESWireless Module• Small leaks detected in seconds• High signal penetration• Long-range• Battery powered for up to 10 years• Temperature and tamper data collected as well as leak dataMembranes• Thin, flexible, wide-area membrane• Designed for reuse, durability, and longevity• Various formats available based on application• Customization available to meet install needsCERTIFICATIONS• IPX5 - weatherproof (wireless module)• RoHS 2011/65/EU• FCC/IC Certified• LoRaWAN 1.0.2

LoRaWAN® R718F Door & Window Contact Sensor (Reed) from Netvox for Monitoring Opening Conditions The netvox R718F is equipped with a reed switch that can be used to detect the status "open" or "closed". Inside the magnetic range, the reed switch is switched on (conductive) and outside it is switched off (non-conductive). Thus, the module can detect the closing and opening signals. This makes the sensor ideal for monitoring doors and windows. Thanks to the built-in radio module, information and data can be sent wirelessly to the LoRaWAN® gateway. The door and window contact sensor is battery-operated and has low energy consumption. Areas of application: Monitoring of doors, windows and garage doors Tracking of production lines

Compact and easily installed LoRaWAN indoor sensor from ELSYS Configurable accelerometer for threshold values and status change with alarm function. Additional regular status messages with temperature, humidity and acceleration values.

SENSATIVE Strips Multisensor MS +Drip for LoRaWAN® The Strips Multisensor +Drip from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users. Ex works, the sensor detects water leakage and can send alarm messages accordingly via IoT Plattforms like B.ONE Gallery. It also measures the ambient temperature to warn of frost if necessary.In addition, the integrated magnetic sensor for monitoring doors and windows and the brightness sensor (LUX) can be activated.The data and measured values are transmitted to the corresponding backend via LoRaWAN®. NOW NEW OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor+Drip is directly created in the MZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Drip Measurement parameters: Humidity detection / flooding alert (water leakage) Temperature: +/- 0.24°C Configurable: Magnetic sensor (door and window), Ambient light: 1-64000 LUX Dimensons: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

SENSATIVE Strips Multisensor MS +Guard for LoRaWAN® The Strips Multisensor +Guard from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere.The minimalistic design as well as the easy mounting and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The magnetic contact sensor is activated ex works, which can monitor, detect and alarm the opening and closing of doors, windows, drawers, etc. In addition a temperature and brightness sensor can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor+Guard is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Guard Measurement parameters: Magnetic sensor (door and window) Configurable: Temperature: +/- 0.24°C, Ambient light: 1-64000 LUX Dimensons: Sensor: 195mm x 15mm x 3mm Magnet: 30mm x 11mm x 1mm Operating conditions: -30°C to +60°C Application area: Indoor and Outdoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

R311W LoRaWAN® Leakage Sensor from Netvox to Prevent Water Damage The Netvox R311W sensor is a LoRaWAN® class A device and enables the detection of water leaks. As soon as the sensor detects a leak, it sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, you can thus receive an immediate email via the alarm and control management and avoid major water damage. Thanks to its small form factor, the device can be installed inconspicuously in almost any location. Areas of application: Data centers Machine and server rooms Pipelines in basements Sanitary facilities Keel rooms of ships OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Netvox R311W is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

NETVOX R311FA Wireless Activity Detection Sensor LoRaWAN® The Netvox R311FA sensor is a LoRaWAN® Class A device and is equipped with an accelerometer that can be used to detect vibration or motion. As soon as the sensor detects motion or vibration, it triggers an alarm and sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, for example, you can directly receive an immediate email via the alarm and rule management. The Activity Sensor is battery-powered and has low energy consumption. It can be mounted using the double-sided adhesive tape already present on the housing. Areas of application: Smart Home Industrial equipment Security area/ Anti-theft device Indoor Central product features: Motion detection by acceleration sensor (accelerometer) Sensitivity of vibration intensity: 62.5mg OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab R311FA is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Smoke detector EASY PROTECT RADIO with LoRaWAN® Interface from ZENNERAttention: This item can only be ordered in increments of 4! Smoke detector from ZENNER approved according to DIN EN 14604 reliably detects all fire classes. It fulfils all standards and approvals required in by German regulations. Allows remote maintenance in accordance with DIN 14676-1 Type C construction: Complete remote inspection Comfort function: event-based LoRaWAN telegram when smoke is detected can be activated via downlink The LoRaWAN device detects the smoke development optically and is additionally equipped with a temperature sensor. This makes it particularly reliable in responding to both slow smouldering fires as well as fast fire progressions with high temperature development. The permanently installed battery of the smoke detector has a lifetime of 10 years and is automatically activated during assembly. The EASY PROTECT Radio is equipped with a large test button for muting as well as with LED control lamps, which ensure the functionality of the and possible interference signals. Note: In the case of smoke detection, an alarm tone is triggered, an alarm message via LoRaWAN can be activated via downlink from FW version 2.20. Approved according to DIN EN 14606 Approved according to DIN 14676 OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER Smoke Detector Easy Protect Radio LoRaWAN is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser.