Scalable IoT LoRaWAN® Outdoor Gateway KONA Macro 868 MHz from TEKTELIC. Backhaul via 4G cellular or Ethernet connection, without geolocation The KONA Macro IoT Gateway is an ideal solution for operators and enterprises that require a very scalable low cost LoRaWAN® gateway that minimizes network TCO while improving coverage and capacity. In order to facilitate rapid deployment, the gateway is designed to be extremely compact and light weight. With the cellular modem embedded internally the KONA Macro is targeted at network sites that dictate a small form factor and low power consumption. Rated IP67 it is designed for the most demanding outdoor installations. The KONA Macro can be installed in various locations reducing site and deployment costs while addressing different vertical IoT applications. Product features and benefits: Optimize coverage and capacity with a cost-effective and extremely compact LoRaWAN® gateway. Quick and easy deployment made possible with custom mounting options, including utility pole, lamp post, tower, roof or wall mounts. Reduce set-up costs with plug-and-play installation utilizing the custom provisioned factory image. Lower site operational costs due to low power consumption and passive cooling. High availability carrier grade design with support for in-service configuration and software updates. Excellent out-of-band rejection of Interference from other networks such as Cellular and Paging. Fully integrated with the broad eco-system of LoRa™ network servers and sensors. Technical data: EU868 Frequency Duplex 16 Rx / 2 Tx (NA) Time Duplex 16 Rx / 2 Tx (Int.) Integrated Band-pass Filter Integrated 3G/4G Antenna Precise Network Synchronization (GPS) 27 dBm Tx Power27 dBm Tx Power Hardended Carrier Grade Enclosure Backhaul Connectivity (ETH / 3G / 4G) Versatile Mounting Options Required accessories (sold separately): TEKTELIC LoRaWAN® Antenna 2.5/3 dBi for KONA Macro Outdoor Gateway TEKTELIC Antenna Cable N-Male to N-Female 1m for KONA Macro Outdoor Gateway LevelOne PoE Injector for Tektelic KONA Macro Outdoor Gateway Please note: The accessories required for the TEKTELIC KONA Macro LoRaWAN® Outdoor Gateway in the form of PoE injector, antenna and antenna cable are not included in the scope of delivery of the gateway and must be purchased separately in our store. You can find them in the "Accessories" tab below.

Powerful Outdoor IoT GatewayPLUS in the LoRaWAN® Network EUROPE of ZENNER Connect GmbH The ZENNER IoT GatewayPLUS Outdoor for building LoRaWAN coverage and realising IoT use cases. The ZENNER IoT GatewayPLUS Outdoor uses the powerful LoRaWAN technology, whose excellent building penetration and wide-area network coverage ensure the connectivity of IoT sensors even under difficult environmental and installation conditions. The outdoor gateway is ideal for LoRaWAN network coverage in rural and urban areas to receive readings from multiple sensors. The device can be used across divisions for a wide range of IoT applications and is an integral part of the ZENNER IoT system solutions. With just a few gateways, entire cities can be covered. Thanks to the very robust housing made of painted aluminium, the outdoor gateway is very resilient to extreme weather conditions and is characterised by a high level of fail-safety. In addition to the two external LoRa antennas for the 16 Channels, the ZENNER IoT GatewayPLUS Outdoor also uses an external LTE antenna to ensure the best possible connection to the backend - provided there is no Ethernet connection. This feature is not found in comparable competitor products. The gateway ensures LoRaWAN reception of your LoRaWAN end devices in the gateway's reception area and transmits their data to the backend. In addition to the reception of your devices beyond your own gateway, you also receive their data as a special added value if they are received by one of the other gateways in the ZENNER Connect LoRaWAN network EUROPE. Like all data transmissions, this is of course secure and AES 128 encrypted. The GatewayPLUS OUTDOOR gives you access to the LoRaWAN® network EUROPE of ZENNER Connect. In order to automatically establish a network connection after commissioning, the gateway has already been stored for you in the backend system ZENNER Datahub. You therefore do not have to integrate the gateway into the system yourself. The access to your personal ZENNER Datahub account/client, which you receive after ordering, is ultimately only required for the installation of sensors whose data you want to receive via the gateway. Unless: You order your sensors with the practical ZENNER IoT PLUG&PLAY booking-in service (more on this below or on the product pages of the respective sensors). The gateway is therefore already completely and permanently pre-configured and an integral part of the ZENNER Connect EUROPE LoRaWAN® network, you only need to establish the power supply. With the gateway, the LoRaWAN® data transmission of 50 own LoRaWAN end devices is included in the purchase price for 12 months. The data transmission from your gateway to the backend system is carried out via the SIM card of ZENNER Connect included in the Gateway. If you are planning a larger project, please contact us. We will be happy to support and advise you individually. By the way: ZENNER includes everything you need to operate the gateway in the scope of delivery - from the mounting device to all antennas and cables. Scope of use ZENNER IoT GatewayPLUS Outdoor: With the ZENNER IoT GatewayPLUS Outdoor you receive LoRaWAN connectivity and data transmission in the ZENNER Connect network EUROPE for 12 months and use of up to 50 LoRaWAN IoT sensors. The gateway is part of the LoRaWAN network of ZENNER Connect GmbH (ZC). Due to the technology, all LoRaWAN end devices in the reception range of your gateway are received in encrypted form and transmitted to the network provider. Of course, you only receive the data of your own end devices! Due to network regulation, the gateway is to be used within the European Union and currently ONLY in the following COUNTRIES! GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA.   Associated User Agreement ZENNER IoT GatewayPLUS Outdoor: Please note: This corresponding associated user agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway.   LoRaWAN® network coverage ZENNER Connect: To the overview map of our network coverage: To the network coverage   NEW OPTIONAL: Order the B.One Gallery visualisation solution for 24 months and for 50 devices with ZENNER IoT PLUG&PLAY directly. In addition, you secure the possibility that your purchased sensors can be automatically created in the ZC LoRaWAN network and already added to your B.One Gallery with the ZENNER IoT PLUG&PLAY login service. No more cumbersome configuration, setup, authentication of sensors necessary in the visualisation. As simple as IoT should be.   User agreement for the visualisation solution B.One Gallery: => Please note when choosing the ZENNER IoT PLUG&PLAY OPTION! that this associated User Agreement (also available below under "Available downloads") is part of the contract when purchasing this gateway with the ZENNER IoT PLUG&PLAY OPTION choosen.   Exchange and inspiration in the B.One Community Have you already implemented your own LoRaWAN® use cases in the Internet of Things or are you new to the topic and would like to exchange ideas? Or has your boss given you the task of diving into the Internet of Things? Then the new B.One Community is the right place for you! Join the B.One Community   Features and functions of the GatewyPLUS Outdoor: Suitable for LoRaWAN IoT solutions ZENNER Connect GmbH is the LoRaWAN® network operator of your gateway. This means that you do not need to register as an independent LoRaWAN® network operator. Gateway use ONLY in the following countries of the European Union: GERMANY, AUSTRIA, DENMARK, SWEDEN, POLAND, NETHERLANDS, FRANCE, SPAIN, ITALY, CROATIA and SLOVENIA. Bidirectional LoRaWAN radio communication Secure encrypted data transmission end-to-end (AES 128) No storage of sensor data such as meter readings on the gateway LoRaWAN gateway modules according to reference architecture 1.5 Automatic switch from mobile radio (already included) to Ethernet backhaul possible, Attention! If the gateway is connected to an Ethernet connection, the customer establishes the data transmission from the gateway to the backend via his own Internet connection!  This may incur additional costs for the data transmission! Therefore, use the connection via the integrated mobile radio data card/SIM, which is already included. This way you will not incur any additional data transmission costs! Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive). Please note: The reception quality and range of your LoRaWAN gateway depends on the mounting or installation location you choose. For details, please refer to the installation instructions and the additional technical documentation. You need mobile radio coverage at the installation or mounting location of the gateway! Alternatively, a separate Ethernet connection. For operation, you need a standard 230V power connection/socket! Plug & Play - easy integration through pre-configured software Security patches and software updates are distributed automatically LoRaWAN gateway modules according to reference architecture 1.5 Automatic switch from mobile radio to Ethernet backhaul (if available) Manufacturer's Declaration of Conformity including all applicable radio, low voltage and electricity regulations of Europe and RED (Radio Equipment Directive) Application areas: Optimal for outdoor IoT use cases Smart City, Smart Parking, Smart Waste, Smart Lighting, ... e.g. monitoring of local network transformer stations; shaft meter reading Smart Industry, Retail, Logistics, SMB, Smart Agriculture & Farming, Asset Tracking... Scope of delivery: IoT Outdoor GatewayPLUS 2x LoRa antenna incl. antenna cable 1x LTE antenna incl. antenna cable 1x Ethernet cable (5m) Mounting device incl. pole mount PoE injector Potential equalisation cable (earthing cable) Cable tie Technical data: Mobile radio: Mini SIM - 2G, 3G (UMTS), 4G (LTE) - external LTE antenna Ethernet: RJ45 - priority over mobile radio LoRa channel: 16 channels - two external antennas TX power: max. 27 dBm (500 mW) conducted Frequency: EU-868 Power supply: Power over Ethernet (PoE) Antennas: External: 2 x LoRa, 1 x LTE (antennas incl. holder included in delivery) Protection class: IP67 Housing: Aluminium, lacquered Operating temperature: 0°C to +50°C Storage temperature: -40°C to +80°C Mounting: Wall, pole (bracket incl. earth cable included, galvanised steel) Maintenance: Remote firmware upgrades via ZENNER Cloud Certification: EN 301 489-3, EN 300 220-2

The LoRaWAN® gateway with 16 channels for the realization of IoT use casesCan be used in all LoRaWAN® networks / Power supply: Power over Ethernet (PoE)Discover the future of intelligent networking with the ZENNER IoT Gateway Outdoor 16! This powerful LoRaWAN® gateway not only offers you outstanding building penetration, but also comprehensive network coverage that ensures stable connectivity of your IoT sensors even under the most demanding conditions. Imagine how you can monitor and control your environment in real time - whether in rural areas or urban centers. With the ZENNER Gateway, this dream becomes a reality. Take advantage of a smart infrastructure and experience the ease of data transmission. Whether you want to monitor the air quality in your city or optimize the energy consumption in your building - the ZENNER IoT Gateway Outdoor 16 is your reliable partner on this journey.What makes this product unique? Its robustness and versatility! The painted aluminum housing withstands extreme weather conditions and ensures maximum reliability. The integration of two external LoRa antennas and an LTE antenna guarantees a first-class connection to the backend. The gateway also supports bidirectional communication with encrypted data transmission (AES 128) so that your information is always secure.The ZENNER IoT Gateway is not only a technical masterpiece, but also extremely adaptable. It can be easily integrated into a wide range of IoT applications, be it heat cost allocators, water or heat meters or even smart city projects such as parking sensors and air quality sensors. With just a few gateways, you can already cover entire cities and thus integrate numerous end devices into the LoRaWAN® wireless system. You can rely on the quality and experience of ZENNER. Our products are developed according to reference architecture 1.5 and support the Semtech Packet Forwarder to always offer you the best performance. In addition, there is an automatic switch from mobile radio to Ethernet backhaul when available - so you are always optimally connected.Performance characteristics in overviewSuitable for LoRaWAN® IoT solutionsBidirectional LoRaWAN® radio communicationEncrypted end-to-end data transmission (AES 128)No storage of meter readings on the gatewayFields of application in EuropeLoRaWAN®-Gateway modules according to reference architecture 1.5Support for the Semtech Packet ForwarderAutomatic change from mobile radio to Ethernet backhaul (if available)ApplicationsSmart City (Smart Parking, Smart Waste, Smart Lighting,…)Monitoring of local network transformer stationsReadout of shaft meters Asset TrackingScope of deliveryGateway - pre-assembled on assembly supportMounting bracket with nuts, spring ring and washers2x spacer sleeves for mounting bracket 2x 868 MHz LoRaWAN®-Antennas1x LTE broadband antenna3x Antenna cable Cable ties2x RJ45 PlugsEquipotential bonding cable (16 mm²)Network cable (5 m) mit PG cable glandPoE injectorPower cord for PoE injectorPoE injector Equipotential bonding cableTechnical dataCellular network: Mini SIM – 2G, 3G (UMTS), 4G (LTE) – external LTE antenna Ethernet: RJ45 – priority over cellular network # LoRa channel: 16 channels - two external antennas TX power: max. 27 dBm (500 mW) conducted Frequency: EU-868 Power supply: Power over Ethernet (PoE) Antennas external: 2 x LoRa, 1 x cellular network (antennas incl. mounting bracket included in scope of delivery) Protection class: IP67Housing: Aluminium, coated Operating temperature: -10 °C to +50 °C Storage: temperature: -40 °C to +80 °C Installation: Wall, pole (bracket incl. grounding cable included in scope of delivery, galvanized steel) Maintenance: Remote firmware upgrades Certification: EN 301 489-3, EN 300 220-2 Weight: approx. 4.1 kg

Kerlink Wirnet iStation 4G IoT LoRaWAN® Outdoor Gateway 868 including PoE Injector Kerlink Wirenet iStation is the next generation of gateways and with its 8 channel RX (125 kHz, multi Spreading Factor) + 1 channel RX (250KHz) or 500kHz, mono Spreading Factor) + 1 channel RX (FSK) for 10 channels RX + 1 channel TX it is more compact and powerful than its predecessor. Thanks to its long range, the Wirnet iStation enables a secure and robust connection between sensor and information system.The Wirnet Station series enables a robust and reliable network implementation under LoRaWAN® for M2M & IoT connectivity service providers.It forms the centrepiece of the IoT (Internet of Things) network solution and enables fast and secure data transmission between the connected object and the information system. Attention: Not compatible with the Helium network! Use Cases: Outdoor LoRaWAN Netzwerk Infrastructur PoE or external power supply for temporary site tests  

Kerlink Wirnet iStation 4G IoT LoRaWAN® Outdoor Gateway 868 without PoE Injector Note:  An additional PoE adapter is required to operate the iStation! see (ArtNR: 169942) or choose the Art NR 173007 GW including  PoE Adapter Kerlink Wirenet iStation is the next generation of gateways and with its 8 channel RX (125 kHz, multi Spreading Factor) + 1 channel RX (250KHz) or 500kHz, mono Spreading Factor) + 1 channel RX (FSK) for 10 channels RX + 1 channel TX it is more compact and powerful than its predecessor. Thanks to its long range, the Wirnet iStation enables a secure and robust connection between sensor and information system.The Wirnet Station series enables a robust and reliable network implementation under LoRaWAN® for M2M & IoT connectivity service providers.It forms the centrepiece of the IoT (Internet of Things) network solution and enables fast and secure data transmission between the connected object and the information system. Attention: Not compatible with the Helium network! Use Cases: Outdoor LoRaWAN Netzwerk Infrastructur PoE or external power supply for temporary site tests