WATTECO Atm'O wireless Outdoor Weather Station
€412.90*
LoRaWAN® WATTECO Atm'O Outdoor Radio Weather Station
This Sensor from WATTECO is measunring outdoor temperature, relative humidity and atmospheric pressure.
Technical details:
LoRaWAN®, Class A
Temperature range: -20°C to +55°C
Measurement of temperature, relative humidity and air pressure
Vertical antenna
Protection class: IP68 for outdoor use
%
DEOS SAM CO2 Air Quality LoRaWAN®
€298.00*
€299.00*
(0.33% saved)
DEOS SAM CO2 Air Quality LoRaWAN®
The DEOS SAM CO2 room air sensor from DEOS AG measures the temperature, humidity and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. The number and colours of the LEDs change depending on the CO2 content (ppm).
The data is transmitted to the corresponding backend via LoRaWAN®.
An external power supply is provided via a mini-USB connection - the cable and the power supply unit are included in the scope of delivery.
Areas of application
Schools, workplaces
Offices, event rooms
Smart buildings
Warning function
Visual and audible alarm when CO2 limits are exceeded (limits can be set individually)
Optical temperature display by LEDs
%
ELSYS ERS CO2 wireless multi-room sensor for air quality, light and motion measurement
€186.00*
€276.98*
(32.85% saved)
Versatile LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring
A LoRaWAN room sensor for measuring the indoor climate in an inconspicuous housing for simple wall mounting.
%
Sentinum FEBRIS CO2 air quality meter LoRaWAN®
€158.90*
€265.00*
(40.04% saved)
Sentinum FEBRIS CO2 air quality meter LoRaWAN®
The FEBRIS CO2 air quality meter from the manufacturer Sentinum measures the temperature, humidity, pressure and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. As a special feature, the sensor with KNOCK-KNOCK function (manual) can trigger an immediate measurement. The data is transmitted to the corresponding backend via LoRaWAN®.
OPTIONAL with ZENNER IoT PLUG&PLAY:
Simply selsect the ZENNER IoT PLUG&PLAY Option by clicking on the selection box. Selecting the function ensures that your purchased Sentinum FEBRIS CO2 air quality meter LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser.
Areas of application
Schools and office complexes
Industry and production
Warehouses and halls
Smart buildings
Warning function
Visual and audible alarm when CO2 limits are exceeded (limits can be set individually)
ELSYS ERS Sound LoRaWAN Multi-Sensor for indoor climate and noise level
From
€143.50*
ELSYS ERS Sound LoRaWAN® multi-sensor for indoor climate and noise level
A LoRaWAN room sensor for measuring the indoor climate with noise level in an unobtrusive housing for easy wall mounting.
%
ELSYS ERS CO2 Lite wireless multi-room sensor for air quality measurement
€139.00*
€169.00*
(17.75% saved)
LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring
A LoRaWAN room sensor to measure the indoor climate (CO2, temperature, humidity) in an inconspicuous housing for easy wall mounting.
Compared to the ERS CO2 sensor, the ELSYS ERS CO2 Lite does not need to detect brightness and movement and is therefore the ideal sensor for measuring the indoor climate.
LoRa Room sensor T+H Comfort ARF8275A
€95.70*
LoRaWAN Room sensor COMFORT: Temperature | Humidity
Optimize the comfort of occupants and the energy consumption
of a building
The COMFORT
IoT sensor lets you measure and analyse changes in temperature and humidity
inside a room. Thanks to the data communicated by the transmitter, you can
optimise ambient comfort and make energy savings.
Highlights of the iot sensor
4 in
1 product: temperature, humidity, alarm button, dry contact input
Over 15 years of autonomy (depending on
version and configuration)
Data transmission modes: periodic and/or
event-trigged
Data logging
Local and remote configuration
Compatible
with KARE
Available versions:
LoRaWAN: EU863-870 / US902-928 /
AU915-928 / AS923
Sigfox: RC1 / RC2 / RC4
Alert
And/Or Trigger an alarm if:
high
and/or low threshold(s) exceeded
press
on alert button
event
detected on the dry contact input
Measure
Monitor:
temperature
humidity
level
Features
Periodic
transmission of temperature and humidity data (with or without logging of
measured values) and/or when thresholds are exceeded (high and/or low).
Redundancy
with configurable number of data repeats per frame
1
digital input to detect one or more changes of state and send an
associated frame
1
button connected to detect one or more events (by pressing a button) and
send an associated frame
Configurable
alarm repetition in the event of a persistent event
Configurable
life frame
Configuration:
local,
via a USB-C port
remote,
via the network, enabling periodicity, transmission modes and alarm
thresholds to be set.
Product
error, configuration error and low battery alerts
General specifications
Dimensions:
111 x 61 x 40 mm
Weight:
107g
Case:
IP20, Bayblend FR3010 (PC/ABS) white plastic (indoor use)
Integrated
fixing system: wall
Recommended
operating conditions:
+5°C
/ +50°C
0 to
85% RH (non-condensing)
1
connectorized battery pack (4000 mAh)
ELSYS ERS Lite wireless Multi room sensor for indoor climate measurement
€58.00*
Low cost LoRaWAN sensor from ELSYS for indoor climate monitoring
The ELSYS ERS Lite is an affordable LoRaWAN room sensor for measuring the indoor climate (temperature and humidity) in an unobtrusive housing for easy wall mounting.
ZENNER Indoor T+H Sensor wM-Bus
€57.00*
Temperature and humidity sensor with wireless M-Bus
or LoRaWAN® radio interface
The Indoor T+H Sensor records the temperature and relative humidity of indoor spaces. The sensor supports the user in optimizing the heating and ventilation behavior. The current temperature and humidity values can be read on the device display at any time. The data collected and stored by the device is transmitted to downstream recording systems using wireless M-Bus or LoRaWAN® radio technology. This creates transparency regarding the heating and ventilation behavior in order to be able to derive possible efficiency and optimization measures. This data can be used, for example, to prevent mold formation. The temperature and humidity measurement takes place internally in the device every three minutes. The average value for the last quarter of an hour is determined from the measured values, saved and added up in the register of the respective temperature or humidity range. The
Radio transmission occurs every 20 seconds for wireless M-Bus and hourly for LoRaWAN®.
Performance features (selection):
Measurement, display and data transmission of temperature and humidity values
Data transmission via wireless M-Bus (factory set parameter)- or LoRaWAN®
Battery life up to 10 years + storage reserve
Internal antenna
Plug & Play – commissioning mode
Optical interface for configuration and reading of stored data
Wall mounting with sealing option
Sensor technology:
Temperature measurement range: -20°C to 50°C
Measuring accuracy: ±0.3°C in the range from 5°C to 50°C
Humidity measuring range: 0% to 100% RH
Measuring accuracy: ±2% RH in the range of 20% to 80%
Resolution of the measured values: 0.1°C and 0.1% RH
%
Tip
ZENNER CO2 INDICATOR L868 ID A for LoRaWAN®
€52.90*
€99.90*
(47.05% saved)
ZENNER CO2 INDICATOR L868 ID A for LoRaWAN®
The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required.
OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services:
Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses.
Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser
NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK.
Download CO2 Sensor Actility ZENNER Datacake Bundle
Link to ThingPARK Actility ZENNER DataCake AirQuality Solution
Use Cases
Indoor Air Quality
Smart Building
Smart School
Smart Office
Smart Home
Product Features
Modern design
Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status
LED traffic light
Integrated battery
Configuration Over the Air (OTA)
Evaluation of the CO2 measured values
Range (ex works)
Evaluation
LED Farbe
< 800ppm
normal
green
800 – 999ppm
slightly increased
yellow
1.000 – 1.399ppm
high
purple
> 1.399ppm
very high
red
The measuring ranges can be set individually via LoRaWAN® downlink.
Specifications
Model
CO2 INDICATOR L868 ID A
Weight
115g
Size
63,6 x 46,0 x 54,6mm
Display Size
59,9 x 49,9mm
LoRaWAN®
Klasse A
Frequency
863 ~ 870MHz
Transmit Power
max. 14dBm
Battery
2.000mAh
Power Input
5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten)
Operating Temperature
0 ~ 40℃
Operating Humidity
0 ~ 99%rH (nicht kondensierende Umgebung)
CO2 Measuring Range
400 ~ 9.999ppm
Accuracy of
400 ~ 2.000ppm --> ±50ppm
Accuracy of
2.000 ~ 9.999ppm --> no guarantee
Scope of Delivery
ZENNER CO2 Indicator L868 ID A for LoRaWAN
User Manual
USB-A to USB-C Cabel
Notice: There is no 5V power supply included in the delivery. You can use a commercially available smartphone USB-A power adapter, for this purpose.