Soil Moisture, Temperature and electrical Conductivity Sensor DL-TRS12 LoRaWAN® The Decentlab soil moisture sensor DL-TRS12 is suitable for outdoor use and measures the moisture in the soil, the temperature and the electrical conductivity. The data is transmitted to the corresponding backend via LoRaWAN®. The transmission interval can be individually configured via downlink OTA. Due to the weatherproof and robust housing in combination with the long battery life, maintenance-free real-time monitoring can take place over several years.  Areas of application: Irrigation control Intelligent agriculture Greenhouse and soil-less plantations Parks Golf courses Performance characteristics: Sensor head dimension: 95mm x 75mm x 25mm Housing dimension (L x W x H): 135mm x 81mm x 70mm (without sensor/cable) IP protection class: housing IP66/67; sensor IP68 Operating temperature: -20℃ to +50℃ Ambient humidity: 0% to 100% RH Device class: Class A Communication: LoRaWAN® standard Activation: OTAA, ABP Transmission power: +14dBm, ADR Power supply: replaceable 2x alkaline C battery (LR14) Battery life: 11.5 years (60min transmission interval, SF12) Available frequency: EU868 Measuring interval: 10min, configurable Cable length: 5m

Ultrasonic Sensor for Distance & Level DL-MBX-001 LoRaWAN® The Decentlab ultrasonic sensor DL-MBX-001 is suitable for outdoor use and enables remote monitoring of water levels in open waters, tank levels, groundwater levels and various applications. It measures the distance between the sensor head and the target. The measuring principle is based on ultrasonic waves that are emitted by the sensor and reflected by nearby objects. Using the travel time of the sound waves and the speed of sound, the sensor calculates the distance travelled and thus the distance to the object. The data is transmitted to the corresponding backend via LoRaWAN®. The transmission interval can be individually configured via downlink OTA. The weatherproof and robust housing in combination with the long battery life allows maintenance-free real-time monitoring for several years.   Areas of application: Running water level Flood monitoring Waste water management Snow level Silo, waste and tank level Performance features: Ultrasonic sensor Measuring range: 50cm to 1000cm Housing dimensions (L x W x H): 170mm x 81mm x 70mm IP protection class: housing IP66/67; sensor IP67 Operating temperature: -20℃ to +50℃ Ambient humidity: 0% to 100% RH Device class: Class A Communication: LoRaWAN® standard Activation: OTAA, ABP Transmission power: +14dBm, ADR Power supply: replaceable 2x alkaline C battery (LR14) Battery life: 10.5 years (60min transmission interval, SF12) Available frequency: EU868 Measuring interval: 10min, configurable  

Decentlab Multisensor DL-LP8P for measuring air quality, humidity, temperature, air pressure & CO2 Decentlab's outdoor-ready air quality monitor continuously measures carbon dioxide concentration (CO2), temperature, humidity and barometric pressure. The data is transmitted in real time via LoRaWAN to the appropriate back end. The transmission interval can be configured individually. Due to the weatherproof and robust housing in combination with the long battery life, a maintenance-free real-time monitoring over several years is possible. The power supply is provided by 2 internal and replaceable alkaline C batteries (LR14). Technical data: CO2 sensor: Measuring range: 0 ... 10000 ppm Accuracy: ±50 ppm or ±3 % of measured value Temperature sensor: Measuring range: -40 ... 125 °C Accuracy: ±0,3 °C Humidity sensor: Measuring range: 0 ... 100 % RH Accuracy: ±2 % RH Barometric Pressure sensor: Application range: 300 ... 1100 hPa, -40 ... 85 °C Accuracy: ±1 hPa

Wireless ultrasonic sensor with LoRaWAN® interface WS-UCC4000 The wireless ultrasonic sensor can be used for remote monitoring of fill level.The fill level, but also other parameters such as geo data and sensor status data, are measured or recorded in configurable time intervals andtransmitted to a counterpart in the LoRa network from where they are available for pure display or further processing.The sensor is parameterised via a Bluetooth interface using a mobile device (smartphone or tablet) and the WILSEN app belonging to the sensor. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased WILSEN wireless ultrasonic sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser Battery powered Data transmission via LoRaWAN LoRaWAN downlink channel for querying and adjusting parameter values Bluetooth interface for commissioning, parameterization and diagnostics

DEOS SAM CO2 Air Quality LoRaWAN® The DEOS SAM CO2 room air sensor from DEOS AG measures the temperature, humidity and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. The number and colours of the LEDs change depending on the CO2 content (ppm). The data is transmitted to the corresponding backend via LoRaWAN®. An external power supply is provided via a mini-USB connection - the cable and the power supply unit are included in the scope of delivery.   Areas of application Schools, workplaces Offices, event rooms Smart buildings Warning function Visual and audible alarm when CO2 limits are exceeded (limits can be set individually) Optical temperature display by LEDs

Sensoneo Smart Waste level sensor Single 3.0 for monitoring the amount of waste. The Sensoneo Single Sensor LoRaWAN is an enterprise-class sensor. Designed for various types of containers from high capacity to small containers, it meets the needs of the customers wanting the secure data transfer to cloud-based applications. The ultrasonic sensors is able to monitor any type of waste in bins of various type and size. It is very robust, water and shock resistant and can be connected to any LoRaWAN. Get real-time data on fill-level in bins. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Sensoneo Smart Waste Ultrasonic Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser   

Versatile LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor for measuring the indoor climate in an inconspicuous housing for simple wall mounting.

Sentinum FEBRIS CO2 air quality meter LoRaWAN® The FEBRIS CO2 air quality meter from the manufacturer Sentinum measures the temperature, humidity, pressure and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. As a special feature, the sensor with KNOCK-KNOCK function (manual) can trigger an immediate measurement. The data is transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY: Simply selsect the ZENNER IoT PLUG&PLAY Option by clicking on the selection box. Selecting the function ensures that your purchased Sentinum FEBRIS CO2 air quality meter LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser. Areas of application Schools and office complexes Industry and production Warehouses and halls Smart buildings Warning function Visual and audible alarm when CO2 limits are exceeded (limits can be set individually)

BOSCH LoRaWAN® Parking Sensor Parking Lot PLS 868 MHz IP67 The LoRaWAN® Parking Lot PLS is a sensor for Smart Parking and Smart City applications. The sensor is battery powered and designed for surface mounting. Both screw and adhesive mounting is possible. The parking sensor detects and reports the occupancy of individual parking spaces / parking lots and thus enables active parking space management. The simple retrofit solution for the monitoring of parking spaces can be installed in a few minutes. Drivers in large cities spend on average more than 40 hours a year behind the wheel alone to find parking spaces. Around 30 % of inner-city traffic and the associated CO2 emissions are accounted for by the search for parking space alone. However, the question of where the next available parking space is has been answered much faster than before with digital solutions for some time now. This time saving is made possible by modern Internet-of-Things technologies. Sensors are integrated into a networked overall mobility solution via LoRaWAN® radio technology (Long Range Wide Area Network). The radio technology makes it possible to collect data from sensors over a large radius via a gateway and send it to intelligent traffic control systems. The information about the occupancy status of the parking lot ends up in the back end of the mobility system, where it is processed and made available to the end users via navigation system, smartphone app or website. In this way, motorists can navigate to the nearest available parking space. The back-end system can also store the type of parking space involved, i.e. "normal" surface parking or special parking space (women's, family or disabled parking, e-charging station). The solution is also suitable for monitoring escape routes (e.g. fire department access roads) or e-charging stations. The parking sensor contains two independent sensor elements, a magnetometer to detect changes in the magnetic field of the environment and a RADAR sensor to measure the reflectivity of the object above the sensor.

Ultrasonic LoRaWAN Sensor Tek766 for tank level monitoring. The LoRaWAN-based Tek766 is a battery powered, configurable ultrasonic level sensor with integrated wireless interface. Use cases: Monitoring of fill levels in tanks Monitoring of fluid levels Ensuring the continuous availability of fuels or other operating resources Monitorable liquids: Fuels Heating oil Kerosene Water Waste oil and more Benefits: Accurate and reliable monitoring of tank levels Alert when filling levels are below or exceeded Optimization of procurement and delivery Optimizing your logistics Increase in process efficiency OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Tekelek TEK766 Ultrasonic Level Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Technical characteristics: Remote configuration Easy installation Up to 14 years of battery life LoRaWAN radio interface (868 MHz) Up to 15 km range CE conformity and ROHS conformity

LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor to measure the indoor climate (CO2, temperature, humidity) in an inconspicuous housing for easy wall mounting. Compared to the ERS CO2 sensor, the ELSYS ERS CO2 Lite does not need to detect brightness and movement and is therefore the ideal sensor for measuring the indoor climate.

Versatile LoRaWAN room sensor from ELSYS for indoor environment and occupany monitoring ERS Eye is a LoRaWAN sensor that measures indoor climate (temperature and humidity), light, motion and room occupancy. ERS Eye is intended for mounting on a ceiling or wall. It detects the presence of body heat in the room by measuring the temperature in an 8×8 matrix with a viewing angle of 60×60 degrees. It can be used, for example, for dynamic workplace management and workplace statistics.

TEKTELIC Agriculture Sensor - Soil Surface Mount Module LoRaWAN® The Agriculture Sensor is a LoRaWAN® Class A device from the manufacturer Tektelic. The sensor measures soil moisture, soil temperature, air temperature and humidity, as well as ambient light. In addition, the sensor can detect motion and has a robust IP67 housing for use in the most difficult outdoor conditions. The sensor is powered by a C-cell LTC battery that is easily replaceable and provides a long battery life of up to 10 years. Several variants are available for the mounting options. Data is transmitted to the appropriate backend via LoRaWAN®. NOTE: The magnet for activating the sensor and the battery are included in the scope of delivery!   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased TEKTELIC Argiculture Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application Agriculture Agricultural technology Parks Smart CIty Nurseries Orchards Golf course

LoRaWAN® R718F Door & Window Contact Sensor (Reed) from Netvox for Monitoring Opening Conditions The netvox R718F is equipped with a reed switch that can be used to detect the status "open" or "closed". Inside the magnetic range, the reed switch is switched on (conductive) and outside it is switched off (non-conductive). Thus, the module can detect the closing and opening signals. This makes the sensor ideal for monitoring doors and windows. Thanks to the built-in radio module, information and data can be sent wirelessly to the LoRaWAN® gateway. The door and window contact sensor is battery-operated and has low energy consumption. Areas of application: Monitoring of doors, windows and garage doors Tracking of production lines

VICKI LoRaWAN® Thermostatic radiator valve Vicki is the perfect solution for all those who are looking for an intelligent and efficient radiator thermostat, want to control it conveniently from anywhere and at the same time want to save a lot of energy costs.With Vicki, you can easily and conveniently regulate your room temperature, even remotely. The Vicki radiator thermostat is very easy to retrofit and monitors the temperature and humidity for you. You set the desired target temperature by simply turning the outer ring of the device. At the same time, the target temperature is displayed directly on the device and is easy to read. Vicki is so smart that it automatically detects when you open a window and temporarily regulates the radiator in that room down. This way, you never run the risk of wasting unnecessary energy when ventilating.Two lithium batteries are included in the delivery.To the whitepaper  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: VICKI LoRaWAN Measurement parameters: Temperature: +/- 0.20°C Humidity: +/- 2% RH Dimension: 54mm x 78mm x 50mm Operating conditions: -20°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: 2X AA Energizer Lithium L91 Battery replaceable: yes Battery life: up to 10 years

Low cost LoRaWAN sensor from ELSYS for indoor environment monitoring A LoRaWAN room sensor for measuring the indoor climate (temperature, humidity), light and motion (PIR), in an inconspicuous housing for simple wall mounting.

ZENNER CO2 INDICATOR L868 ID A for LoRaWAN® The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK. Download CO2 Sensor Actility ZENNER Datacake Bundle Link to ThingPARK Actility ZENNER DataCake AirQuality Solution Use Cases Indoor Air Quality Smart Building Smart School Smart Office Smart Home Product Features Modern design Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status LED traffic light Integrated battery Configuration Over the Air (OTA) Evaluation of the CO2 measured values Range (ex works) Evaluation LED Farbe < 800ppm normal green 800 – 999ppm slightly increased yellow 1.000 – 1.399ppm high purple > 1.399ppm very high red The measuring ranges can be set individually via LoRaWAN® downlink. Specifications Model CO2 INDICATOR L868 ID A Weight 115g Size 63,6 x 46,0 x 54,6mm Display Size 59,9 x 49,9mm LoRaWAN® Klasse A Frequency 863 ~ 870MHz Transmit Power max. 14dBm Battery 2.000mAh Power Input 5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten) Operating Temperature 0 ~ 40℃ Operating Humidity 0 ~ 99%rH (nicht kondensierende Umgebung) CO2 Measuring Range 400 ~ 9.999ppm Accuracy of 400 ~ 2.000ppm --> ±50ppm Accuracy of 2.000 ~ 9.999ppm --> no guarantee    Scope of Delivery ZENNER CO2 Indicator L868 ID A for LoRaWAN User Manual USB-A to USB-C Cabel Notice: There is no 5V power supply included in the delivery.  You can use a commercially available smartphone USB-A power adapter, for this purpose.

SENSATIVE Strips Multisensor MS +Comfort for LoRaWAN® The Strips Multisensor +Comfort from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users. From the factory, the sensor measures the temperature, humidity and brightness (LUX) of the environment. In addition, the integrated magnetic sensor for monitoring doors and windows  can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor +Comfort for LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser     Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Comfort Measurement parameters: Temperature: +/- 0.40°C Humidity: +/- 3% RH Ambient light: 1-64000 LUX Configurable: Magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

SENSATIVE Strips Multisensor MS +Drip for LoRaWAN® The Strips Multisensor +Drip from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users. Ex works, the sensor detects water leakage and can send alarm messages accordingly via IoT Plattforms like B.ONE Gallery. It also measures the ambient temperature to warn of frost if necessary.In addition, the integrated magnetic sensor for monitoring doors and windows and the brightness sensor (LUX) can be activated.The data and measured values are transmitted to the corresponding backend via LoRaWAN®. NOW NEW OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor+Drip is directly created in the MZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Drip Measurement parameters: Humidity detection / flooding alert (water leakage) Temperature: +/- 0.24°C Configurable: Magnetic sensor (door and window), Ambient light: 1-64000 LUX Dimensons: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

SENSATIVE Strips Multisensor MS +Guard for LoRaWAN® The Strips Multisensor +Guard from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere.The minimalistic design as well as the easy mounting and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The magnetic contact sensor is activated ex works, which can monitor, detect and alarm the opening and closing of doors, windows, drawers, etc. In addition a temperature and brightness sensor can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor+Guard is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Guard Measurement parameters: Magnetic sensor (door and window) Configurable: Temperature: +/- 0.24°C, Ambient light: 1-64000 LUX Dimensons: Sensor: 195mm x 15mm x 3mm Magnet: 30mm x 11mm x 1mm Operating conditions: -30°C to +60°C Application area: Indoor and Outdoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

LoRaWAN® sensor for indoor opening activity The EMS Door Sensor from ELSYS detects opening activities and movements (accelerometer). Due to the very minimalistic and compact design, the sensor can be easily mounted on doors, windows, cabinets, etc. with the adhesive strips already attached. This makes the sensor ideal for a wide range of applications: Smart Buildings Workplace Management Recognition of opening activities Motion detection Like all Elsys sensors, this one can be configured easily and quickly via NFC (Sensor Settings App) or over the air (OTA) via downlink. The sensor requires a 3.6V AA lithium battery for power supply. This battery is not included in the scope of delivery and must be ordered separately (see accessories).

Low cost LoRaWAN sensor from ELSYS for indoor climate monitoring The ELSYS ERS Lite is an affordable LoRaWAN room sensor for measuring the indoor climate (temperature and humidity) in an unobtrusive housing for easy wall mounting.

R311W LoRaWAN® Leakage Sensor from Netvox to Prevent Water Damage The Netvox R311W sensor is a LoRaWAN® class A device and enables the detection of water leaks. As soon as the sensor detects a leak, it sends an immediate message to the connected backend. With ZENNER's ELEMENT IoT platform, you can thus receive an immediate email via the alarm and control management and avoid major water damage. Thanks to its small form factor, the device can be installed inconspicuously in almost any location. Areas of application: Data centers Machine and server rooms Pipelines in basements Sanitary facilities Keel rooms of ships OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Netvox R311W is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

SENSATIVE Strips Presence for LoRaWAN® The Strips Presence by SENSATIVE is an ultra-thin (3mm) active IR occupancy sensor for offices and buildings. The sensor monitors e.g. desk occupancy by measuring objects and people at close range (configurable up to 50cm). The minimalist design as well as the easy installation (adhesive back) and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The active IR sensor is activated ex works. In addition, the integrated magnetic sensor can be activated to monitor doors and windows. The data and measured values are transmitted to the corresponding backend via LoRaWAN®.   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Presence is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Office Smart School Smart Building Smart Home Performance features: Model: Strips Presence Measurement parameters: Active IR (infrared) occupancy sensor Configurable: magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor Mounting: adhesive backside LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip