Kerlink Wirnet iFemtoCell-evolution Indoor LoRaWAN Gateway
Product number:
171882
Manufacturer:
Kerlink
EAN:
4001471741245
Weight:
0.25 kg
Wirnet iFemtoCell-evolution Indoor LoRaWAN Gateway from Kerlink
The Wirnet iFemtoCell-evolution is a small configurable, high performance LoRaWAN gateway for smart IoT networks.
The device is especially designed for the extension of public networks indoors or for private IoT networks. The device can be used across industries for a wide range of IoT applications. Use the device to implement your Smart City, Smart Home, Smart School projects (and much more) - wherever a reliable and permanent supply of LoRaWAN is required or you want to consolidate your existing network.
The cost-efficient gateway with compact form factor is easy to configure and can be used with different backhaul connections:
- Mini-SIM - 4G Worldwide Module (with 3G/2G fallback) with integrated LTE antenna
- Ethernet (RJ45)
This is also the main difference between the iFemtoCell-evolution and its sister product iFemtoCell, which enables a WiFi connection instead of the 3G/4G backhaul.
Attention: Not compatible with the Helium network!
Special Features:
- Robust, modular and scalable indoor LoRaWAN gateway
- Low power consumption and long range (15+ km in semi-urban areas and 2 km in urban areas)
- High capacity and reliability for bi-directional indoor communications processing large volumes of endpoints and messages
- Easy to install and quick to configure using the same software as Wirnet iStation
- High immunity to interference due to built-in band-pass filters for better data transmission and permanent high availability
Secure hardware and software architecture:
- SecureBoot (signed Firmware)
- Secure storage (keys and certificates in the secure area) using the ProvenCore™ solution
- Secured connections and backhaul protection (OpenVPN/IPsec)
- Reboot (watchdog) and restore the previous management configuration (or factory configuration if the boot problem cannot be solved)
Properties "Kerlink Wirnet iFemtoCell-evolution Indoor LoRaWAN Gateway"
| device type: | Gateway |
|---|---|
| industry: | Buildings & Facilities, Housing Industry, Local and district heating, Public & Private Utilities, Smart Building, Smart City, Smart Factory & Industry 4.0 |
| location: | Indoor |
| technology: | LoRaWAN |
Technical specifications
- Frequency: EU 863-870 MHz
- 8-channel RX (125 kHz, multi-spreading factor) + 1-channel RX (250KHz or 500kHz, mono-spreading factor) + 1-channel RX (FSK) for 10-channel RX + 1-channel TX
- Sensitivity: up to -140 dBm (SF12)
- Backhaul connectivity: 4G module with 3G/2G fallback and Ethernet (RJ45)
- Operating temperature: -20°C to +55°C
- Mounting: wall mounting with screws (2 oblong holes) or lay on a surface
- Weight (Gateway): 163g
- Dimensions: 160 x 90 x 35 mm
- LEDs: power, backhaul, LoRaWAN activity
- Casing: IP30
- Power supply:
- AC/DC power supply (90-264VAC/12VDC) with 5.5 x 2.5mm connector
- 5V DC supply via USB-C
Kerlink Wirnet iFemtoCell LoRaWAN Indoor-Gateway
€370.00*
Lean Wirnet iFemtoCell LoRaWAN Indoor Gateway from Kerlink
The Wirnet iFemtoCell is a smart, configurable and performant indoor LoRaWAN gateway for smart IoT network.
Based on LoRa technology, this gateway is perfectly designed for indoor public network extension (additional coverage in buildings to densify public network availability and continuity of service) or for ad-hoc indoor private coverage, like manufacturing, logistics or industrial sites requiring continuous connectivity for their IoT applications.
Available in most global unlicensed frequency bands (like ISM ones), this cost-effective gateway is proposed through a compact and full featured casing. Easy to configure, it offers multiple options for backhaul like Ethernet, WiFi or WAN.
Used as a hub to connect end devices, it can power various in-building enterprise applications like assets monitoring, energy consumption control, security enforcement or any other operation-critical data collection in various environment (buildings, factory, industrial sites, farms, harbors, airports, mines, ...).
This LoRaWAN gateway leverages the same successful LoRa RF technical design as its carrier-grade predecessor, the Wirnet Station, and offers high performance for very deep indoor coverage in demanding environments (basement, underground, parking, elevators shafts…) to connect energy meters, parking sensors or equipment actuators.
This long-range and low-power gateway offers 49 LoRa demodulators over 9 channels and comes with exclusive features for its remote monitoring and management with Kerlink network operations solutions, the Wanesy Management Center.
The Wirnet iFemtoCell is also compatible with the Wanesy Small Private Network solution to deploy standalone and self-operating LoRaWAN private network.
Attention: Not compatible with the Helium network!
Strengths:
Carrier grade, robust, modular and scalable indoor LoRaWAN Gateway
Low Power consumption and Wide Area coverage (15+km in semi-urban area and 2km in urban area)
High capacity and reliability, for deep indoor bidirectional communications handling high volumes of end-points and messages.
Light infrastructure, easy to install and fast to configure.
High interferences-resistance with built-in band bass filters for better data transmission and permanent high availability.
Technical features:
CPU & Memory:
Powerful processor ARM processor with hardware watchdog and optimized power consumption management
DDRAM 256 MB / 8 GB eMMC
Operating System:
LoRa Packet Forwarder, Linux OS, embedded base station controller (Wanesy Management Center remote management)
Software packages and development tools included
Networking:
Firewalling, routing, networking and tunneling features
Security:
Secure boot, trust zone, firewall, software auto-recovery and secure firmware remote upgrade.
Mechanical:
Quality plastic enclosure, weight less than 500 g.
RJ45, Jack, SMA/RP-SMA, USB port and host secure interface
Power:
Power supply 230VAC/12VDC with provide connector
Communication:
49 LoRa demodulators over 9 channels.
Omnidirectional 3 dBi external antenna.
Wide coverage and very deep indoor coverage (undergrounds, basements, lifts shafts…) based on LoRa specifications.
Supported ISM bands: EU 863-870 MHz, India 865-867 MHz, US 902-928 MHz FCC, AS 923 MHz.
Backhaul connectivity over Ethernet, WLAN with built-in antenna. WWAN in option (USB dongle).
Environment:
Full operating range, humidity tolerance for indoor use only.
Certified for Ingress protection / Impact Resistance / Flammability rating.
Remote management:
Remote alarm notification, firmware upgrade, file transfer, configuration, radio monitoring and statistics (Wanesy Management Center)
Certification:
EU / FCC / IC / ETSI certified.
Kerlink Wirnet iStation 4G IoT Outdoor Gateway 868 inclusive PoE Injector
€662.80*
Kerlink Wirnet iStation 4G IoT LoRaWAN® Outdoor Gateway 868 including PoE Injector
Kerlink Wirenet iStation is the next generation of gateways and with its 8 channel RX (125 kHz, multi Spreading Factor) + 1 channel RX (250KHz) or 500kHz, mono Spreading Factor) + 1 channel RX (FSK) for 10 channels RX + 1 channel TX it is more compact and powerful than its predecessor. Thanks to its long range, the Wirnet iStation enables a secure and robust connection between sensor and information system.The Wirnet Station series enables a robust and reliable network implementation under LoRaWAN® for M2M & IoT connectivity service providers.It forms the centrepiece of the IoT (Internet of Things) network solution and enables fast and secure data transmission between the connected object and the information system.
Attention: Not compatible with the Helium network!
Use Cases:
Outdoor LoRaWAN Netzwerk Infrastructur
PoE or external power supply for temporary site tests
%
TEKTELIC KONA Micro IoT LoRaWAN® Indoor Gateway with Battery Backup
€289.00*
€364.90*
(20.8% saved)
KONA Micro IoT LoRaWAN® Indoor Gateway 868 MHz from TEKTELIC with build-in battery backup
The Lora Gateway KONA Micro was developed for setting up mainly indoor LoRaWAN® networks. It is ideal for the housing industry, for corporate applications and can also be used in the industrial sector, precisely where "Always On" connectivity is required for IoT solutions.
The gateway is equipped with an internal 3G/4G modem and a four-hour battery backup and continues to work in the event of a power failure. It is easy to configure and inexpensive, it is an ideal gateway for the provision of applications in the housing industry or at company level in areas in which, for example, LoRaWAN® coverage through outdoor gateways is not yet available.
%
Kerlink Wirnet iStation 4G IoT Outdoor Gateway 868 without PoE Injector
€617.90*
€644.90*
(4.19% saved)
PoE Injector:
without PoE Injector
|
external antenna 3db:
without external antenna
Kerlink Wirnet iStation 4G IoT LoRaWAN® Outdoor Gateway 868 without PoE Injector
Note: An additional PoE adapter is required to operate the iStation! see (ArtNR: 169942) or choose the Art NR 173007 GW including PoE Adapter
Kerlink Wirenet iStation is the next generation of gateways and with its 8 channel RX (125 kHz, multi Spreading Factor) + 1 channel RX (250KHz) or 500kHz, mono Spreading Factor) + 1 channel RX (FSK) for 10 channels RX + 1 channel TX it is more compact and powerful than its predecessor. Thanks to its long range, the Wirnet iStation enables a secure and robust connection between sensor and information system.The Wirnet Station series enables a robust and reliable network implementation under LoRaWAN® for M2M & IoT connectivity service providers.It forms the centrepiece of the IoT (Internet of Things) network solution and enables fast and secure data transmission between the connected object and the information system.
Attention: Not compatible with the Helium network!
Use Cases:
Outdoor LoRaWAN Netzwerk Infrastructur
PoE or external power supply for temporary site tests