WATTECO Temperature Sensor Cels'O LoRaWAN® IP66 with external probe
Product number:
170809
Manufacturer:
WATTECO
EAN:
5070049000007
Weight:
0.186 kg
Robust LoRaWAN® Sensor from WATTECO with external temperature probe and 5 m cable
The Cels'O Sensor from WATTECO is a robust, battery-powered IP 66 capable sensor for real-time transmission of temperature measurements over long distances via LoRaWAN.
Monitoring of temperature-sensitive products in cold chains and temperature-controlled supply chains.
Periodic transmission of the sensor values and/or alarm in case of exceeding or falling below the limit values.
Use Cases:
- Monitoring of the ambient temperature in cooling and climatic chambers in the agricultural and food industry
- Applications: refrigerator, freezer, refrigerated vehicles and refrigerated containers
- Temperature-controlled supply chains
- Share information in the cloud
Properties "WATTECO Temperature Sensor Cels'O LoRaWAN® IP66 with external probe"
| device type: | Sensor Plug'n'Play |
|---|---|
| technology: | LoRaWAN |
WATTECO door contact sensor Clos'O outdoor 868 Mhz
From
€193.00*
LoRaWAN door contact sensor Clos'O 868 MHz.
Clos'O is a LoRaWAN® Sensor that determines if a gate is properly closed. Installed on the frame (or on the fixed part, it detects the position of a magnet fixed on the gate moving part. The sensor reports on a public or private LoRaWAN® radio network the open or closed state of the gate.
An alert is transmitted if the sensor is dismantled.
Use Cases for LoRaWAN door contact sensor Clos'O:
checking the opening status of gates, portals, garage doors, etc.
continuous monitoring of gates in fences along free surfaces on properties, near freeways, railroads and industrial sites
Features and functions:
LoRaWAN®, Class A
autonomous sensor
Detection distance: up to 35 mm
Alarm on removal of the sensor
very easy installation
more than 5 years autonomous operation
designed for outdoor use
868 MHz (other frequencies on request)
%
ZENNER Indoor T+H Sensor LoRaWAN®
€42.75*
€57.00*
(25% saved)
Temperature and humidity sensor with LoRaWAN®
or wireless M-Bus radio interface
The Indoor T+H Sensor records the temperature and relative humidity of indoor spaces. The sensor supports the user in optimizing the heating and ventilation behavior. The current temperature and humidity values can be read on the device display at any time. The data collected and stored by the device is transmitted to downstream recording systems using wireless M-Bus or LoRaWAN® radio technology. This creates transparency regarding the heating and ventilation behavior in order to be able to derive possible efficiency and optimization measures. This data can be used, for example, to prevent mold formation. The temperature and humidity measurement takes place internally in the device every three minutes. The average value for the last quarter of an hour is determined from the measured values, saved and added up in the register of the respective temperature or humidity range. The
Radio transmission occurs every 20 seconds for wireless M-Bus and hourly for LoRaWAN®.
Performance features (selection):
Measurement, display and data transmission of temperature and humidity values
Data transmission via wireless M-Bus or LoRaWAN®
Battery life up to 10 years + storage reserve
Internal antenna
Plug & Play – commissioning mode
Optical interface for configuration and reading of stored data
Wall mounting with sealing option
Sensor technology:
Temperature measurement range: -20°C to 50°C
Measuring accuracy: ±0.3°C in the range from 5°C to 50°C
Humidity measuring range: 0% to 100% RH
Measuring accuracy: ±2% RH in the range of 20% to 80%
Resolution of the measured values: 0.1°C and 0.1% RH