Mobile LoRaWAN® Field Tester / Range Tester from Adeunis LoRaWAN field tester for real-time network analysis and signal strength testing.  It allows the transmission, reception and immediate display of LoRaWAN messages and their quality/field strength in the network used. Use Cases: Coverage and range tests with geolocation of the measuring points Optimization of sensor locations / positions for assembly planning Selection of the most suitable network

Decentlab Multisensor DL-LP8P for measuring air quality, humidity, temperature, air pressure & CO2 Decentlab's outdoor-ready air quality monitor continuously measures carbon dioxide concentration (CO2), temperature, humidity and barometric pressure. The data is transmitted in real time via LoRaWAN to the appropriate back end. The transmission interval can be configured individually. Due to the weatherproof and robust housing in combination with the long battery life, a maintenance-free real-time monitoring over several years is possible. The power supply is provided by 2 internal and replaceable alkaline C batteries (LR14). OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab DL-LP8P is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Technical data: CO2 sensor: Measuring range: 0 ... 10000 ppm Accuracy: ±50 ppm or ±3 % of measured value Temperature sensor: Measuring range: -40 ... 125 °C Accuracy: ±0,3 °C Humidity sensor: Measuring range: 0 ... 100 % RH Accuracy: ±2 % RH Barometric Pressure sensor: Application range: 300 ... 1100 hPa, -40 ... 85 °C Accuracy: ±1 hPa

Decentlab Pressure, Level and Temperature Sensor DL-PR26 with LoRaWAN® The Decentlab DL-PR26 is suitable for outdoor use and enables remote monitoring of water levels in open waters, tank levels, groundwater levels and various other applications.It measures the pressure at the sensor head relative to the pressure at the instrument housing. Under water, the relative pressure indicates the depth of the sensor head, with 1 bar corresponding exactly to 10 m. The temperature is also recorded. The data is transmitted to the corresponding backend via LoRaWAN®. The transmission interval can be individually configured via downlink OTA. Due to the weatherproof and robust housing in combination with the long battery life, maintenance-free real-time monitoring can be carried out for several years. Areas of application: Level/depth monitoring in liquid tanks or in wells. Groundwater level monitoring Water depth and temperature monitoring in flowing or open water Relative pressure measurement Performance characteristics: Sensor head dimensions: length 74mm and diameter 21mmHousing dimensions (L x W x H): 135mm x 81mm x 70mm (without sensor/cable)IP protection class: housing IP66/67; sensor IP68Operating temperature: -20℃ to +50℃.Ambient humidity: 0% to 100% RHDevice class: Class ACommunication: LoRaWAN® standardActivation: OTAA, ABPTransmit power: +14dBm, ADRPower supply: replaceable 2x alkaline C battery (LR14)Battery life: 11.6 years (60min transmission interval, SF12)Available frequency: EU868Measuring interval: 10min, configurableCable length: 10m

Soil Moisture, Temperature and electrical Conductivity Sensor DL-TRS12 LoRaWAN® The Decentlab soil moisture sensor DL-TRS12 is suitable for outdoor use and measures the moisture in the soil, the temperature and the electrical conductivity. The data is transmitted to the corresponding backend via LoRaWAN®. The transmission interval can be individually configured via downlink OTA. Due to the weatherproof and robust housing in combination with the long battery life, maintenance-free real-time monitoring can take place over several years.  OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab DL-TRS12 is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application: Irrigation control Intelligent agriculture Greenhouse and soil-less plantations Parks Golf courses Performance characteristics: Sensor head dimension: 95mm x 75mm x 25mm Housing dimension (L x W x H): 135mm x 81mm x 70mm (without sensor/cable) IP protection class: housing IP66/67; sensor IP68 Operating temperature: -20℃ to +50℃ Ambient humidity: 0% to 100% RH Device class: Class A Communication: LoRaWAN® standard Activation: OTAA, ABP Transmission power: +14dBm, ADR Power supply: replaceable 2x alkaline C battery (LR14) Battery life: 11.5 years (60min transmission interval, SF12) Available frequency: EU868 Measuring interval: 10min, configurable Cable length: 5m

Ultrasonic Sensor for Distance & Level DL-MBX-001 LoRaWAN® The Decentlab ultrasonic sensor DL-MBX-001 is suitable for outdoor use and enables remote monitoring of water levels in open waters, tank levels, groundwater levels and various applications. It measures the distance between the sensor head and the target. The measuring principle is based on ultrasonic waves that are emitted by the sensor and reflected by nearby objects. Using the travel time of the sound waves and the speed of sound, the sensor calculates the distance travelled and thus the distance to the object. The data is transmitted to the corresponding backend via LoRaWAN®. The transmission interval can be individually configured via downlink OTA. The weatherproof and robust housing in combination with the long battery life allows maintenance-free real-time monitoring for several years. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Decentlab DL-MBX-001 is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Running water level Flood monitoring Waste water management Snow level Silo, waste and tank level Performance features: Ultrasonic sensor Measuring range: 50cm to 1000cm Housing dimensions (L x W x H): 170mm x 81mm x 70mm IP protection class: housing IP66/67; sensor IP67 Operating temperature: -20℃ to +50℃ Ambient humidity: 0% to 100% RH Device class: Class A Communication: LoRaWAN® standard Activation: OTAA, ABP Transmission power: +14dBm, ADR Power supply: replaceable 2x alkaline C battery (LR14) Battery life: 10.5 years (60min transmission interval, SF12) Available frequency: EU868 Measuring interval: 10min, configurable  

DEOS SAM CO2 Air Quality LoRaWAN® The DEOS SAM CO2 room air sensor from DEOS AG measures the temperature, humidity and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. The number and colours of the LEDs change depending on the CO2 content (ppm). The data is transmitted to the corresponding backend via LoRaWAN®. An external power supply is provided via a mini-USB connection - the cable and the power supply unit are included in the scope of delivery. OPTIONAL with ZENNER IoT PLUG&PLAY: Simply selsect the ZENNER IoT PLUG&PLAY Option by clicking on the selection box. Selecting the function ensures that your purchased DEOS SAM CO2 Air Quality LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser.     Areas of application Schools, workplaces Offices, event rooms Smart buildings Warning function Visual and audible alarm when CO2 limits are exceeded (limits can be set individually) Optical temperature display by LEDs

LoRaWAN® sensor for indoor opening activity The EMS Door Sensor from ELSYS detects opening activities and movements (accelerometer). Due to the very minimalistic and compact design, the sensor can be easily mounted on doors, windows, cabinets, etc. with the adhesive strips already attached. This makes the sensor ideal for a wide range of applications: Smart Buildings Workplace Management Recognition of opening activities Motion detection Like all Elsys sensors, this one can be configured easily and quickly via NFC (Sensor Settings App) or over the air (OTA) via downlink. The sensor requires a 3.6V AA lithium battery for power supply. This battery is not included in the scope of delivery and must be ordered separately (see accessories). OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS EMS DOOR and WINDOW cotact LoRaWAN® Sensors is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor to measure the indoor climate (CO2, temperature, humidity) in an inconspicuous housing for easy wall mounting. Compared to the ERS CO2 sensor, the ELSYS ERS CO2 Lite does not need to detect brightness and movement and is therefore the ideal sensor for measuring the indoor climate.  OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS CO2 Lite is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Versatile LoRaWAN CO2 Sensor from ELSYS for indoor climate monitoring  A LoRaWAN room sensor for measuring the indoor climate in an inconspicuous housing for simple wall mounting. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS CO2 multi-room Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Versatile LoRaWAN room sensor from ELSYS for indoor environment and occupany monitoring ERS Eye is a LoRaWAN sensor that measures indoor climate (temperature and humidity), light, motion and room occupancy. ERS Eye is intended for mounting on a ceiling or wall. It detects the presence of body heat in the room by measuring the temperature in an 8×8 matrix with a viewing angle of 60×60 degrees. It can be used, for example, for dynamic workplace management and workplace statistics. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS Eye is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Low cost LoRaWAN sensor from ELSYS for indoor climate monitoring The ELSYS ERS Lite is an affordable LoRaWAN room sensor for measuring the indoor climate (temperature and humidity) in an unobtrusive housing for easy wall mounting. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS Lite wireless Multi room sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

Low cost LoRaWAN sensor from ELSYS for indoor environment monitoring A LoRaWAN room sensor for measuring the indoor climate (temperature, humidity), light and motion (PIR), in an inconspicuous housing for simple wall mounting. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ELSYS ERS multi-room Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

ELSYS ERS Sound LoRaWAN® multi-sensor for indoor climate and noise level A LoRaWAN room sensor for measuring the indoor climate with noise level in an unobtrusive housing for easy wall mounting.

Compact and easily installed LoRaWAN indoor sensor from ELSYS Configurable accelerometer for threshold values and status change with alarm function. Additional regular status messages with temperature, humidity and acceleration values.

LoRaWAN pressure & temperature sensor for level monitoringHigh-precision lorawan level probe With the Lobaro level probe, high-precision liquid levels can be monitored wirelessly via LoRaWAN at low cost and with low energy consumption. The sensors have a standard cable length of up to 15 meters and are connected via a digital bus; shorter lengths are also available on request. Power is supplied via the Lobaro box using a D-cell battery with a capacity of up to 19Ah. Due to the extremely energy-efficient system architecture of the Lobaro hardware, battery life of several years is easily achievable, even with a relatively frequent hourly measurement & LoRa transmission interval, for example. With the help of ceramic pressure sensors, level monitoring can be realized with an accuracy of just a few millimetres. For example, a 0..1.5 bar sensor is ideal for high-precision level detection of liquids with a depth of up to 15 meters. Other sensors support pressure ranges of up to 1000 bar and are therefore suitable for a wide range of industrial applications, such as tank level monitoring or pipe burst monitoring in district heating pipe systems. Internet-based monitoring of water level measuring points on rivers is another conceivable application. Together with the good penetration and range (up to 5km) of LoRaWAN and the low energy requirement, even hard-to-reach locations, e.g. at Weirs or groundwater level shafts can be monitored wirelessly. Please also contact us if you require our bridge with a mobile radio connection via NB-IoT (Narrowband-IoT) or LTE instead of LoRaWAN. We are happy to carry out such customer-specific adaptations as part of a cost-efficient adaptation of the hardware. The configuration is user-friendly via the free Lobaro Tool (Windows, Linux, Mac).   Background level probe sensor technology The level probe is queried via a digital interface as standard. This enables cable lengths of up to 15m.   Performance features: ·          Extremely low power consumption by switching off the measuring electronics, optimized for battery-powered applications ·          Compact and robust stainless steel housing ·          High accuracy ( ±0.5%FSO(Typ.), ±0.25%FSO), outstanding long-term stability, no hysteresis ·          Pressure ranges from 0 to 1.5 bar (15m water column) ·          Integrated temperature sensor ·          Temperature range: -10 to +70°C ·          Protection class: IP67   Key data / Key facts ·          Radio technology LoRaWAN 1.1 compatible On request: NB-IoT/LTE ·          Power supply  1x D-cell battery (3.6V) ·          Measuring range differential 0...1.5 bar corresponds to 0...15m water column ·          Accuracy Total error band [%FS] ±0.5 ·          Query / measuring interval configuration Time-controlled via "CRON job" ·          Antenna Internal 868 MHz PCB On request: external SMA antenna connection. ·          Housing 122mm (w) x 82mm (l) x 55mm (h) Waterproof, IP67 ·          Conformity CE, RoHS, WEEE  

 LoRaWAN Room sensor COMFORT: Temperature | Humidity  Optimize the comfort of occupants and the energy consumption of a building  The COMFORT IoT sensor lets you measure and analyse changes in temperature and humidity inside a room. Thanks to the data communicated by the transmitter, you can optimise ambient comfort and make energy savings.   Highlights of the iot sensor  4 in 1 product: temperature, humidity, alarm button, dry contact input Over 15 years of autonomy (depending on version and configuration) Data transmission modes: periodic and/or event-trigged Data logging Local and remote configuration Compatible with KARE Available versions: LoRaWAN: EU863-870 / US902-928 / AU915-928 / AS923 Sigfox: RC1 / RC2 / RC4 Alert And/Or Trigger an alarm if:  high and/or low threshold(s) exceeded press on alert button event detected on the dry contact input   Measure Monitor:  temperature humidity level   Features  Periodic transmission of temperature and humidity data (with or without logging of measured values) and/or when thresholds are exceeded (high and/or low). Redundancy with configurable number of data repeats per frame 1 digital input to detect one or more changes of state and send an associated frame 1 button connected to detect one or more events (by pressing a button) and send an associated frame Configurable alarm repetition in the event of a persistent event Configurable life frame Configuration: local, via a USB-C port remote, via the network, enabling periodicity, transmission modes and alarm thresholds to be set. Product error, configuration error and low battery alerts   General specifications  Dimensions: 111 x 61 x 40 mm Weight: 107g Case: IP20, Bayblend FR3010 (PC/ABS) white plastic (indoor use) Integrated fixing system: wall Recommended operating conditions: +5°C / +50°C 0 to 85% RH (non-condensing) 1 connectorized battery pack (4000 mAh)  

LoRaWAN® R718F Door & Window Contact Sensor (Reed) from Netvox for Monitoring Opening Conditions The netvox R718F is equipped with a reed switch that can be used to detect the status "open" or "closed". Inside the magnetic range, the reed switch is switched on (conductive) and outside it is switched off (non-conductive). Thus, the module can detect the closing and opening signals. This makes the sensor ideal for monitoring doors and windows. Thanks to the built-in radio module, information and data can be sent wirelessly to the LoRaWAN® gateway. The door and window contact sensor is battery-operated and has low energy consumption. Areas of application: Monitoring of doors, windows and garage doors Tracking of production lines   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased Netvox R718F is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser 

SENSATIVE Strips Multisensor MS +Comfort for LoRaWAN® The Strips Multisensor +Comfort from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users. From the factory, the sensor measures the temperature, humidity and brightness (LUX) of the environment. In addition, the integrated magnetic sensor for monitoring doors and windows  can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor +Comfort for LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser     Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Comfort Measurement parameters: Temperature: +/- 0.40°C Humidity: +/- 3% RH Ambient light: 1-64000 LUX Configurable: Magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

SENSATIVE Strips Multisensor MS +Drip for LoRaWAN® The Strips Multisensor +Drip from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere. The minimalist design as well as the easy installation and long battery life, make the Strips the go-to sensor for architects and design-conscious users. Ex works, the sensor detects water leakage and can send alarm messages accordingly via IoT Plattforms like B.ONE Gallery. It also measures the ambient temperature to warn of frost if necessary.In addition, the integrated magnetic sensor for monitoring doors and windows and the brightness sensor (LUX) can be activated.The data and measured values are transmitted to the corresponding backend via LoRaWAN®. NOW NEW OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor+Drip is directly created in the MZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Drip Measurement parameters: Humidity detection / flooding alert (water leakage) Temperature: +/- 0.24°C Configurable: Magnetic sensor (door and window), Ambient light: 1-64000 LUX Dimensons: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

SENSATIVE Strips Multisensor MS +Guard for LoRaWAN® The Strips Multisensor +Guard from SENSATIVE has several promising applications and is the ideal choice for a professional indoor IoT application. Due to its ultra-slim shape, the sensor can be mounted almost anywhere.The minimalistic design as well as the easy mounting and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The magnetic contact sensor is activated ex works, which can monitor, detect and alarm the opening and closing of doors, windows, drawers, etc. In addition a temperature and brightness sensor can be activated. The data and measured values are transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Multisensor+Guard is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: Strips MS +Guard Measurement parameters: Magnetic sensor (door and window) Configurable: Temperature: +/- 0.24°C, Ambient light: 1-64000 LUX Dimensons: Sensor: 195mm x 15mm x 3mm Magnet: 30mm x 11mm x 1mm Operating conditions: -30°C to +60°C Application area: Indoor and Outdoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

SENSATIVE Strips Presence for LoRaWAN® The Strips Presence by SENSATIVE is an ultra-thin (3mm) active IR occupancy sensor for offices and buildings. The sensor monitors e.g. desk occupancy by measuring objects and people at close range (configurable up to 50cm). The minimalist design as well as the easy installation (adhesive back) and long battery life, make the Strips the go-to sensor for architects and design-conscious users. The active IR sensor is activated ex works. In addition, the integrated magnetic sensor can be activated to monitor doors and windows. The data and measured values are transmitted to the corresponding backend via LoRaWAN®.   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased SENSATIVE Strips Presence is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser    Areas of application: Smart Office Smart School Smart Building Smart Home Performance features: Model: Strips Presence Measurement parameters: Active IR (infrared) occupancy sensor Configurable: magnetic sensor (door and window) Dimension: 195mm x 15mm x 3mm Operating conditions: -30°C to +60°C Application area: Indoor Mounting: adhesive backside LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: built-in LiMnO2 battery Battery replaceable: no Battery life: up to 10 years (Battery Calculator) Accessories: +Switch, +Clip

Sentinum FEBRIS CO2 air quality meter LoRaWAN® The FEBRIS CO2 air quality meter from the manufacturer Sentinum measures the temperature, humidity, pressure and CO2 content in indoor rooms. By means of a visual and acoustic alarm when the adjustable CO2 threshold values are exceeded, you always keep an eye on the indoor air quality and can ventilate as required. As a special feature, the sensor with KNOCK-KNOCK function (manual) can trigger an immediate measurement. The data is transmitted to the corresponding backend via LoRaWAN®. OPTIONAL with ZENNER IoT PLUG&PLAY: Simply selsect the ZENNER IoT PLUG&PLAY Option by clicking on the selection box. Selecting the function ensures that your purchased Sentinum FEBRIS CO2 air quality meter LoRaWAN® is directly created in the ZC LoRaWAN®-Netz EUROPE and automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser. Areas of application Schools and office complexes Industry and production Warehouses and halls Smart buildings Warning function Visual and audible alarm when CO2 limits are exceeded (limits can be set individually)

Intelligent level measurement via LoRaWAN® with the Sentinum Apollon-Q The Apollon-Q sensor from Sentinum stands for high-quality measurement results, as it combines optical distance measurement with a radar-based measurement principle. The LoRaWAN® sensor can be used for level measurements of up to three meters and is suitable for a wide range of applications, containers and materials. This also includes small containers such as waste paper baskets with suitable mounting area. Application areas: Waste management logistics Level measurement of liquids and inhomogeneous materials Key product features: Accurate measurement results through combination of different measurement technologies (optical measurement and radar) Opening detection by acceleration sensor (accelerometer) 3D level detection Robust housing Activation by app via NFC ("AtlasConnect") Technical data: Standard measuring range: 80 mm to 2000 mm Maximum measuring range: 30 mm to 3500 mm      Dimension (L x W x H): 109 mm x 53 mm x 33 mm Weight: 160g (including 2 batteries) Operating temperature: -20 °C - +85 °C Operating humidity: 20% - 95% IP protection class: IP66 Sensors for distance measurement: Radar and optical Technology: LoRaWAN® Frequency: EU868 Device class: Class A Downlink configuration: Yes Power supply: Rated voltage 3V (one or two batteries, depending on version) Operating time: 5 years (48 measurements and 24 transmissions/day)

Skysens SKYAGR1 - Soil Moisture Sensor LoRaWAN® The Skysens SKYAGR1 is a cost-effective, easy-to-use LoRaWAN-based solution for monitoring soil moisture and temperature in landscaping, agriculture and other applications. The most important features are: Linear humidity measurement. Suitable for outdoor use. Excellent long-term stability. LED interface. Low power consumption compared to other technologies. Adjustable sensor measurement interval over network. Ready with end-to-end software application. Magnetic restart function. Description: Band LoRaWAN MHZ EU868 - Europe 868MHz; External antenna with +3 dBi; Temperature Sensitivity - 0.5°C (at -10°C to +85°C ; Humidity Sensitivity - 1% RH between 20% and 80%; Ambient conditions from -40ºC to +80ºC and 0% RH to 100% RH; Battery: 3.6V LiSOCl2 AA (changeable)