M-Bus-LoRa Bridge ACR-CV-101L-M-D2 LL

€171.00*

Prices excl. VAT plus shipping costs

Available in 28 days

Ac Konfig-Kabel f. M-Bus-LoRa Bridge ACR

€56.00*

Ac Konfig-Kabel f. M-Bus-LoRa Bridge ACR

€56.00*

M-Bus-LoRa Bridge ACR-CV-101L-M-D

€192.00*

M-Bus-LoRa Bridge ACR-CV-101L-M-D

€192.00*

M-Bus-LoRa Bridge ACR-CV-101L-M-EAC

€179.00*

M-Bus-LoRa Bridge ACR-CV-101L-M-EAC

€179.00*

Product number: 188270

Manufacturer: ACRIOS Systems

Weight: 0.475 kg

Remote data readings from M-Bus meters

The M-Bus to LoRaWAN converter finds its application mainly in meter and calorimeter readings, typically in heating plants and district heating stations.

In the field of district heating stations, effective monitoring and management of heat meters play a vital role in heat production, optimizing energy consumption and increasing overall operational efficiency.

Integrating meters, typically with M-Bus, into LoRaWAN networks is a solution that facilitates the acquisition of relevant data for consumption overview at 15-minute intervals.

The ACRIOS M-Bus to LoRaWAN or NB-IoT converter supports connection of up to 5 UL (Unit Loads) and communication is based on the M-Bus protocol EN 137 57-3. Thanks to the support of the M-Bus protocol, it can read any M-Bus meter without the need for further modifications.

The converter can be supplied with one or two batteries, or in an externally powered version, depending on the requirements of the application.

SPECIFICATION

· Communication over LoRa network using LoRaWAN 1.0.3 protocol or over NB-IoT network using UDP protocol

· Device type: Master

· The bus is powered by the device itself

· Communication speed 300 - 9600Bd

· Maximum of connected devices 5UL

· External antenna with SMA connector for the possibility of outputting the antenna or using the antenna with higher gain

· Power supply by 2x D-cell batteries

· Battery life up to 5 years, depending on frequency of communication. Battery is replaceable

· Integrated LUA scripting interface for modifying device logic without changing the firmware

· Connection of any meter supporting M-Bus communication

· Primary meter addressing capability

· Secondary meter addressing capability

· Data filtering based on the VIF & DIF values on the hardware level

· WAGO clamps for easy and quick installation

· Downlink message configuration

· Firmware update over the air (FUOTA) supported in the NB-IoT network

· Connection and reading of several meters with the addressing

· Possibility to send control commands via M-Bus communication - for example to the valve

TECHNICAL PARAMETERS

· Length: 145 mm

· Wide: 90 mm

· Height: 55 mm

· IP coverage: IP65

· Operating temperature: -30 °C to +60 °C

· Montage: wall or pole

· Weight: 395 g / 450 g

PACKAGING

· 1x IoT converter

· 1x Antenna

· 2x Battery - for battery-powered version

Ac Konfig-Kabel f. M-Bus-LoRa Bridge ACR

USB configuration cable for M-Bus to LoRaWAN converter administration from ACRIOS. The ACRIOS USB configuration cable allows easy administration: Configuration (e.g. LoRaWAN parameters, time intervals) Firmware updates Log messages / error analysis

Manufacturer:

€56.00*

M-Bus-LoRa Bridge ACR-CV-101L-M-D

Remote data readings from M-Bus meters The M-Bus to LoRaWAN converter finds its application mainly in meter and calorimeter readings, typically in heating plants and district heating stations. In the field of district heating stations, effective monitoring and management of heat meters play a vital role in heat production, optimizing energy consumption and increasing overall operational efficiency. Integrating meters, typically with M-Bus, into LoRaWAN networks is a solution that facilitates the acquisition of relevant data for consumption overview at 15-minute intervals. The ACRIOS M-Bus to LoRaWAN or NB-IoT converter supports connection of up to 5 UL (Unit Loads) and communication is based on the M-Bus protocol EN 137 57-3. Thanks to the support of the M-Bus protocol, it can read any M-Bus meter without the need for further modifications. The converter can be supplied with one or two batteries, or in an externally powered version, depending on the requirements of the application. SPECIFICATION · Communication over LoRa network using LoRaWAN 1.0.3 protocol or over NB-IoT network using UDP protocol · Device type: Master · The bus is powered by the device itself · Communication speed 300 - 9600Bd · Maximum of connected devices 5UL · External antenna with SMA connector for the possibility of outputting the antenna or using the antenna with higher gain · Power supply by D-cell battery · Battery life up to 5 years, depending on frequency of communication. Battery is replaceable · Integrated LUA scripting interface for modifying device logic without changing the firmware · Connection of any meter supporting M-Bus communication · Primary meter addressing capability · Secondary meter addressing capability · Data filtering based on the VIF & DIF values on the hardware level · WAGO clamps for easy and quick installation · Downlink message configuration · Firmware update over the air (FUOTA) supported in the NB-IoT network · Connection and reading of several meters with the addressing · Possibility to send control commands via M-Bus communication - for example to the valve TECHNICAL PARAMETERS · Length: 145 mm · Wide: 90 mm · Height: 55 mm · IP coverage: IP65 · Operating temperature: -30 °C to +60 °C · Montage: wall or pole · Weight: 395 g / 450 g PACKAGING · 1x IoT converter · 1x Antenna · 1x Battery - for battery-powered version

Manufacturer:

€192.00*

M-Bus-LoRa Bridge ACR-CV-101L-M-EAC

Remote data readings from M-Bus meters The M-Bus to LoRaWAN converter finds its application mainly in meter and calorimeter readings, typically in heating plants and district heating stations. In the field of district heating stations, effective monitoring and management of heat meters play a vital role in heat production, optimizing energy consumption and increasing overall operational efficiency. Integrating meters, typically with M-Bus, into LoRaWAN networks is a solution that facilitates the acquisition of relevant data for consumption overview at 15-minute intervals. The ACRIOS M-Bus to LoRaWAN or NB-IoT converter supports connection of up to 5 UL (Unit Loads) and communication is based on the M-Bus protocol EN 137 57-3. Thanks to the support of the M-Bus protocol, it can read any M-Bus meter without the need for further modifications. The converter can be supplied with one or two batteries, or in an externally powered version, depending on the requirements of the application. SPECIFICATION · Communication over LoRa network using LoRaWAN 1.0.3 protocol or over NB-IoT network using UDP protocol · Device type: Master · The bus is powered by the device itself · Communication speed 300 - 9600Bd · Maximum of connected devices 5UL · External antenna with SMA connector for the possibility of outputting the antenna or using the antenna with higher gain · Power supply by external 220V AC power supply · Battery life up to 5 years, depending on frequency of communication. Battery is replaceable · Integrated LUA scripting interface for modifying device logic without changing the firmware · Connection of any meter supporting M-Bus communication · Primary meter addressing capability · Secondary meter addressing capability · Data filtering based on the VIF & DIF values on the hardware level · WAGO clamps for easy and quick installation · Downlink message configuration · Firmware update over the air (FUOTA) supported in the NB-IoT network · Connection and reading of several meters with the addressing · Possibility to send control commands via M-Bus communication - for example to the valve TECHNICAL PARAMETERS Length: 145 mm · Wide: 90 mm · Height: 55 mm · IP coverage: IP65 · Operating temperature: -30 °C to +60 °C · Montage: wall or pole · Weight: 395 g / 450 g PACKAGING · 1x IoT converter · 1x Antenna · 1x Battery - for battery-powered version

Manufacturer:

€179.00*