Ac Konfig-Kabel f. M-Bus-LoRa Bridge ACR
Product number:
188115
Manufacturer:
ACRIOS Systems
Weight:
0.103 kg
USB configuration cable for M-Bus to LoRaWAN converter administration from ACRIOS.
The ACRIOS USB configuration cable allows easy administration:
Configuration (e.g. LoRaWAN parameters, time intervals)
Firmware updates
Log messages / error analysis
M-Bus-LoRa Bridge ACR-CV-101L-M-D
€192.00*
Remote data readings from M-Bus
meters
The M-Bus to LoRaWAN converter finds its application mainly in meter
and calorimeter readings, typically in heating plants and district heating
stations.
In the field of district heating stations, effective monitoring and
management of heat meters play a vital role in heat production, optimizing
energy consumption and increasing overall operational efficiency.
Integrating meters, typically with M-Bus, into LoRaWAN networks is a
solution that facilitates the acquisition of relevant data for consumption overview
at 15-minute intervals.
The ACRIOS M-Bus to LoRaWAN or NB-IoT converter supports connection of
up to 5 UL (Unit Loads) and communication is based on the M-Bus protocol EN 137
57-3. Thanks to the support of the M-Bus protocol, it can read any M-Bus meter
without the need for further modifications.
The converter can be supplied with one or two batteries, or in an
externally powered version, depending on the requirements of the application.
SPECIFICATION
·
Communication over LoRa network using LoRaWAN
1.0.3 protocol or over NB-IoT network using UDP protocol
·
Device type: Master
·
The bus is powered by the device itself
·
Communication speed 300 - 9600Bd
·
Maximum of connected devices 5UL
·
External antenna with SMA connector for the
possibility of outputting the antenna or using the antenna with higher gain
·
Power supply by D-cell battery
·
Battery life up to 5 years, depending on
frequency of communication. Battery is replaceable
·
Integrated LUA scripting interface for modifying
device logic without changing the firmware
·
Connection of any meter supporting M-Bus communication
·
Primary meter addressing capability
·
Secondary meter addressing capability
·
Data filtering based on the VIF & DIF values
on the hardware level
·
WAGO clamps for easy and quick installation
·
Downlink message configuration
·
Firmware update over the air (FUOTA) supported
in the NB-IoT network
·
Connection and reading of several meters with
the addressing
·
Possibility to send control commands via M-Bus
communication - for example to the valve
TECHNICAL PARAMETERS
·
Length: 145 mm
·
Wide: 90 mm
·
Height: 55 mm
·
IP coverage: IP65
·
Operating temperature: -30 °C to +60 °C
·
Montage: wall or pole
·
Weight: 395 g / 450 g
PACKAGING
·
1x IoT converter
·
1x Antenna
·
1x Battery - for battery-powered version
Manufacturer:
M-Bus-LoRa Bridge ACR-CV-101L-M-EAC
€179.00*
Remote data readings from M-Bus
meters
The M-Bus to LoRaWAN converter finds its application mainly in meter
and calorimeter readings, typically in heating plants and district heating
stations.
In the field of district heating stations, effective monitoring and
management of heat meters play a vital role in heat production, optimizing
energy consumption and increasing overall operational efficiency.
Integrating meters, typically with M-Bus, into LoRaWAN networks is a
solution that facilitates the acquisition of relevant data for consumption overview
at 15-minute intervals.
The ACRIOS M-Bus to LoRaWAN or NB-IoT converter supports connection of
up to 5 UL (Unit Loads) and communication is based on the M-Bus protocol EN 137
57-3. Thanks to the support of the M-Bus protocol, it can read any M-Bus meter
without the need for further modifications.
The converter can be supplied with one or two batteries, or in an
externally powered version, depending on the requirements of the application.
SPECIFICATION
·
Communication over LoRa network using LoRaWAN
1.0.3 protocol or over NB-IoT network using UDP protocol
·
Device type: Master
·
The bus is powered by the device itself
·
Communication speed 300 - 9600Bd
·
Maximum of connected devices 5UL
·
External antenna with SMA connector for the
possibility of outputting the antenna or using the antenna with higher gain
·
Power supply by external 220V AC power supply
·
Battery life up to 5 years, depending on
frequency of communication. Battery is replaceable
·
Integrated LUA scripting interface for modifying
device logic without changing the firmware
·
Connection of any meter supporting M-Bus communication
·
Primary meter addressing capability
·
Secondary meter addressing capability
·
Data filtering based on the VIF & DIF values
on the hardware level
·
WAGO clamps for easy and quick installation
·
Downlink message configuration
·
Firmware update over the air (FUOTA) supported
in the NB-IoT network
·
Connection and reading of several meters with
the addressing
·
Possibility to send control commands via M-Bus
communication - for example to the valve
TECHNICAL PARAMETERS
Length: 145 mm
·
Wide: 90 mm
·
Height: 55 mm
·
IP coverage: IP65
·
Operating temperature: -30 °C to +60 °C
·
Montage: wall or pole
·
Weight: 395 g / 450 g
PACKAGING
·
1x IoT converter
·
1x Antenna
·
1x Battery - for battery-powered version
Manufacturer:
M-Bus-LoRa Bridge ACR-CV-101L-M-D2 LL
€171.00*
Remote data readings from M-Bus
meters
The M-Bus to LoRaWAN converter finds its application mainly in meter
and calorimeter readings, typically in heating plants and district heating
stations.
In the field of district heating stations, effective monitoring and
management of heat meters play a vital role in heat production, optimizing
energy consumption and increasing overall operational efficiency.
Integrating meters, typically with M-Bus, into LoRaWAN networks is a
solution that facilitates the acquisition of relevant data for consumption overview
at 15-minute intervals.
The ACRIOS M-Bus to LoRaWAN or NB-IoT converter supports connection of
up to 5 UL (Unit Loads) and communication is based on the M-Bus protocol EN 137
57-3. Thanks to the support of the M-Bus protocol, it can read any M-Bus meter
without the need for further modifications.
The converter can be supplied with one or two batteries, or in an
externally powered version, depending on the requirements of the application.
SPECIFICATION
·
Communication over LoRa network using LoRaWAN
1.0.3 protocol or over NB-IoT network using UDP protocol
·
Device type: Master
·
The bus is powered by the device itself
·
Communication speed 300 - 9600Bd
·
Maximum of connected devices 5UL
·
External antenna with SMA connector for the
possibility of outputting the antenna or using the antenna with higher gain
·
Power supply by 2x D-cell
batteries
·
Battery life up to 5 years, depending on
frequency of communication. Battery is replaceable
·
Integrated LUA scripting interface for modifying
device logic without changing the firmware
·
Connection of any meter supporting M-Bus communication
·
Primary meter addressing capability
·
Secondary meter addressing capability
·
Data filtering based on the VIF & DIF values
on the hardware level
·
WAGO clamps for easy and quick installation
·
Downlink message configuration
·
Firmware update over the air (FUOTA) supported
in the NB-IoT network
·
Connection and reading of several meters with
the addressing
·
Possibility to send control commands via M-Bus
communication - for example to the valve
TECHNICAL PARAMETERS
·
Length: 145 mm
·
Wide: 90 mm
·
Height: 55 mm
·
IP coverage: IP65
·
Operating temperature: -30 °C to +60 °C
·
Montage: wall or pole
·
Weight: 395 g / 450 g
PACKAGING
·
1x IoT converter
·
1x Antenna
· 2x Battery - for battery-powered version
Manufacturer: