Scalable IoT LoRaWAN® Outdoor Gateway KONA Macro 868 MHz from TEKTELIC. Backhaul via 4G cellular or Ethernet connection, without geolocation The KONA Macro IoT Gateway is an ideal solution for operators and enterprises that require a very scalable low cost LoRaWAN® gateway that minimizes network TCO while improving coverage and capacity. In order to facilitate rapid deployment, the gateway is designed to be extremely compact and light weight. With the cellular modem embedded internally the KONA Macro is targeted at network sites that dictate a small form factor and low power consumption. Rated IP67 it is designed for the most demanding outdoor installations. The KONA Macro can be installed in various locations reducing site and deployment costs while addressing different vertical IoT applications. Product features and benefits: Optimize coverage and capacity with a cost-effective and extremely compact LoRaWAN® gateway. Quick and easy deployment made possible with custom mounting options, including utility pole, lamp post, tower, roof or wall mounts. Reduce set-up costs with plug-and-play installation utilizing the custom provisioned factory image. Lower site operational costs due to low power consumption and passive cooling. High availability carrier grade design with support for in-service configuration and software updates. Excellent out-of-band rejection of Interference from other networks such as Cellular and Paging. Fully integrated with the broad eco-system of LoRa™ network servers and sensors. Technical data: EU868 Frequency Duplex 16 Rx / 2 Tx (NA) Time Duplex 16 Rx / 2 Tx (Int.) Integrated Band-pass Filter Integrated 3G/4G Antenna Precise Network Synchronization (GPS) 27 dBm Tx Power27 dBm Tx Power Hardended Carrier Grade Enclosure Backhaul Connectivity (ETH / 3G / 4G) Versatile Mounting Options Required accessories (sold separately): TEKTELIC LoRaWAN® Antenna 2.5/3 dBi for KONA Macro Outdoor Gateway TEKTELIC Antenna Cable N-Male to N-Female 1m for KONA Macro Outdoor Gateway LevelOne PoE Injector for Tektelic KONA Macro Outdoor Gateway Please note: The accessories required for the TEKTELIC KONA Macro LoRaWAN® Outdoor Gateway in the form of PoE injector, antenna and antenna cable are not included in the scope of delivery of the gateway and must be purchased separately in our store. You can find them in the "Accessories" tab below.

KONA Micro IoT LoRaWAN® Indoor Gateway 868 MHz from TEKTELIC with build-in battery backup The Lora Gateway KONA Micro was developed for setting up mainly indoor LoRaWAN® networks. It is ideal for the housing industry, for corporate applications and can also be used in the industrial sector, precisely where "Always On" connectivity is required for IoT solutions. The gateway is equipped with an internal 3G/4G modem and a four-hour battery backup and continues to work in the event of a power failure. It is easy to configure and inexpensive, it is an ideal gateway for the provision of applications in the housing industry or at company level in areas in which, for example, LoRaWAN® coverage through outdoor gateways is not yet available.

LoRaWAN® based GPS Tracker from TEKTELIC for industrial Asset Management. The KONA Industrial GPS Tracker provides GPS-enabled real-time location of fixed and mobile assets over LoRaWAN®. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments, with an operable temperature range of -40°C to +65°C. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments and an optional BLE integration. The device contains 2x D Cell batteries for optimal battery life of up to 8-10 years. The unit is equipped with an accelerometer to accommodate event-based start-up, minimizing unnecessary battery usage. Key product features: 8-10 year battery life Precise GPS Data transmission via LoRaWAN Rugged IP67 design Accelerometer Internal antenna Class A Further technical information is contained in the manufacturer's datasheet, which you can find below under "Related Links".

TEKTELIC Agriculture Sensor - Soil Surface Mount Module LoRaWAN® The Agriculture Sensor is a LoRaWAN® Class A device from the manufacturer Tektelic. The sensor measures soil moisture, soil temperature, air temperature and humidity, as well as ambient light. In addition, the sensor can detect motion and has a robust IP67 housing for use in the most difficult outdoor conditions. The sensor is powered by a C-cell LTC battery that is easily replaceable and provides a long battery life of up to 10 years. Several variants are available for the mounting options. Data is transmitted to the appropriate backend via LoRaWAN®. NOTE: The magnet for activating the sensor and the battery are included in the scope of delivery!   OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased TEKTELIC Argiculture Sensor is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the sensor data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  Areas of application Agriculture Agricultural technology Parks Smart CIty Nurseries Orchards Golf course

VICKI LoRaWAN® Thermostatic radiator valve Vicki is the perfect solution for all those who are looking for an intelligent and efficient radiator thermostat, want to control it conveniently from anywhere and at the same time want to save a lot of energy costs.With Vicki, you can easily and conveniently regulate your room temperature, even remotely. The Vicki radiator thermostat is very easy to retrofit and monitors the temperature and humidity for you. You set the desired target temperature by simply turning the outer ring of the device. At the same time, the target temperature is displayed directly on the device and is easy to read. Vicki is so smart that it automatically detects when you open a window and temporarily regulates the radiator in that room down. This way, you never run the risk of wasting unnecessary energy when ventilating.Two lithium batteries are included in the delivery.To the whitepaper  Areas of application: Smart Home Smart Office Smart School Smart Building Performance features: Model: VICKI LoRaWAN Measurement parameters: Temperature: +/- 0.20°C Humidity: +/- 2% RH Dimension: 54mm x 78mm x 50mm Operating conditions: -20°C to +60°C Application area: Indoor LoRaWAN® device class: Class A Activation: OTAA Configuration: Downlink Frequency: Europe (863-870 MHz) Transmit power: +14dBm Transmission interval: configurable Power supply: 2X AA Energizer Lithium L91 Battery replaceable: yes Battery life: up to 10 years

LoRaWAN® antenna (2.5/3 dBi) for connection to the TEKTELIC KONA Macro Outdoor Gateway. The antenna is omnidirectional with high gain and vertical polarization, designed for LoRa applications in the European 863-870 MHz ISM band. Product features: Omnidirectional pattern (360° in the horizontal plane) Vertical polarization Dipole radiation element 2.5 dBi gain For further information please refer to the data sheet in the download area below.

ZENNER CO2 INDICATOR L868 ID A for LoRaWAN® The ZENNER CO2 INDICATOR is a compact indoor LoRaWAN® radio sensor (868MHz) for measuring the CO2 content of indoor air. This product uses the photoacoustic principle to detect the CO2 concentration (ppm) in real time, enabling more efficient ventilation behaviour and faster response time. With the integrated display and the colour-changing LED display, the sensor always provides real-time information about the current CO2 value, the battery level and the status of the LoRaWAN® connection. An optimal stationary and mobile companion in the company, at the workplace, in the meeting room at a meeting or in the canteen. It can be placed on any flat surface. In addition, the device can also be used "stand alone", i.e. without a LoRaWAN® connection, e.g. at a meeting outside the company, when visiting a customer or a restaurant outside the range of the LoRaWAN® network. Without LoRaWAN® connection, however, no remote monitoring or alarming can take place. The CO2 limits can be set individually by radio command (downlink). The device can be operated with the integrated rechargeable battery or permanently powered by a standard USB-A power supply unit 5V. Please note that only the USB-A to USB-C charging cable is included, a power supply unit is also required. OPTIONAL with ZENNER IoT PLUG&PLAY booking-in services: Simply selsect one of the two ZENNER IoT PLUG&PLAY booking-in options to the right of the product image by clicking on the selection box. Selecting the log-in service ensures that your purchased ZENNER CO2 Indicator is directly created in the ZC LoRaWAN®-Netz EUROPE and optionally also automatically added to your B.One Gallery visualisation platform. Without manual configuration, setup and authentication. Prerequisite for visualisation: You already have a ZENNER IoT GatewayPLUS SMART, ZENNER IoT GatewayPLUS Indoor or Outdoor with the IoT PLUG&PLAY Option selected in uses. Order, plug in, switch on and view the ZENNER CO2 Indicator data in your B.One Gallery. See the measurement data, actions and progressions of your sensor directly there. Design and view your graphics, charts and reports. Create graphical reports of your data and share them with your colleagues, partners, customers or service providers simply via WebLink. The reports can be updated and the recipients only need a web browser  NOW NEW also available and expandable within the Actillity ZENNER DataCake Starterkit on ThingPARK. Download CO2 Sensor Actility ZENNER Datacake Bundle Link to ThingPARK Actility ZENNER DataCake AirQuality Solution Use Cases Indoor Air Quality Smart Building Smart School Smart Office Smart Home Product Features Modern design Display with CO2 indication (ppm) as well as quality of LoRaWAN connection and battery status LED traffic light Integrated battery Configuration Over the Air (OTA) Evaluation of the CO2 measured values Range (ex works) Evaluation LED Farbe < 800ppm normal green 800 – 999ppm slightly increased yellow 1.000 – 1.399ppm high purple > 1.399ppm very high red The measuring ranges can be set individually via LoRaWAN® downlink. Specifications Model CO2 INDICATOR L868 ID A Weight 115g Size 63,6 x 46,0 x 54,6mm Display Size 59,9 x 49,9mm LoRaWAN® Klasse A Frequency 863 ~ 870MHz Transmit Power max. 14dBm Battery 2.000mAh Power Input 5V⎓ 1A (Hinweis: im Lieferumfang ist kein Netzteil enthalten) Operating Temperature 0 ~ 40℃ Operating Humidity 0 ~ 99%rH (nicht kondensierende Umgebung) CO2 Measuring Range 400 ~ 9.999ppm Accuracy of 400 ~ 2.000ppm --> ±50ppm Accuracy of 2.000 ~ 9.999ppm --> no guarantee    Scope of Delivery ZENNER CO2 Indicator L868 ID A for LoRaWAN User Manual USB-A to USB-C Cabel Notice: There is no 5V power supply included in the delivery.  You can use a commercially available smartphone USB-A power adapter, for this purpose.

Monitor home & office environment with TEKTELIC's LoRaWAN® Smart Room PIR Sensor (EU-868). The KONA Smart Room Sensor integrates practical functionality into a very small form factor. The Smart Room PIR Sensor is an ideal solution for holistically monitoring the home and office environment, whether measuring and reporting temperature, humidity, light, motion, vibration, open/closed doors and windows, or other user-defined functions. The sensor is optimized for long battery life and excellent transmission performance. It is fully Over The Air (OTA) configurable by the user for custom applications, behaviors, thresholds, trigger events, and reports, so you can implement many different smart home IoT applications with the same device. There are two variants of the KONA Smart Room Sensor. Once the PIR variant (motion detection) shown here and the BASE variant. The latter can also be found in our store under item number 173400 as well as following in the "Similar items" tab. Advantages & Features: User configurable parameters and thresholds Designed for optimal battery life (see table in datasheet) Easy wall, ceiling or table mounting Easy deployment with slim design Very small form factor IP30 Ingress Protection Functions & Applications: Motion detection (doors, windows, drawers) - Reed switch (magnet is required) G-force measurement (adjustable trigger) Motion detection (PIR) Light detection (on / off) Temperature measurement Humidity measurement Technical data: Dimensions: 42 x 42 x 17 mm Weight: 25 g Protection class: IP30 Operating temperature: 0 - 60°C Battery type: CR2477 RF Power: 15 dBm RF Sensitivity: up to -137 dBm internal antenna LoRaWAN Class A

Temperature and humidity sensor with LoRaWAN® or wireless M-Bus radio interface The Indoor T+H Sensor records the temperature and relative humidity of indoor spaces. The sensor supports the user in optimizing the heating and ventilation behavior. The current temperature and humidity values can be read on the device display at any time. The data collected and stored by the device is transmitted to downstream recording systems using wireless M-Bus or LoRaWAN® radio technology. This creates transparency regarding the heating and ventilation behavior in order to be able to derive possible efficiency and optimization measures. This data can be used, for example, to prevent mold formation. The temperature and humidity measurement takes place internally in the device every three minutes. The average value for the last quarter of an hour is determined from the measured values, saved and added up in the register of the respective temperature or humidity range. The Radio transmission occurs every 20 seconds for wireless M-Bus and hourly for LoRaWAN®. Performance features (selection):  Measurement, display and data transmission of temperature and humidity values Data transmission via wireless M-Bus or LoRaWAN® Battery life up to 10 years + storage reserve Internal antenna Plug & Play – commissioning mode Optical interface for configuration and reading of stored data Wall mounting with sealing option   Sensor technology: Temperature measurement range: -20°C to 50°C Measuring accuracy: ±0.3°C in the range from 5°C to 50°C Humidity measuring range: 0% to 100% RH Measuring accuracy: ±2% RH in the range of 20% to 80% Resolution of the measured values: 0.1°C and 0.1% RH

Monitor the home & office environment with TEKTELIC's LoRaWAN® Smart Room Base Sensor (EU-868). The KONA Smart Room Sensor integrates a lot of useful functions in a very small form factor. The Smart Room Base Sensor is ideal for holistic monitoring of home and office environments, whether measuring and reporting temperature, humidity, vibration, open/closed doors and windows, leak detection, or other user-defined functions. The sensor is optimized for long battery life and excellent transmission performance. It is fully Over The Air (OTA) configurable by the user for custom applications, behaviors, thresholds, trigger events, and reports, so you can implement many different smart home IoT applications with the same device. There are two variants of the KONA Smart Room Sensor. Once the BASE variant shown here and the PIR variant (motion detection). The latter can also be found in our store under item number 173401 as well as in the following tab "Similar items". Advantages & Features: User configurable parameters and thresholds Designed for optimal battery life (see table in datasheet) Easy wall, ceiling or table mounting Easy deployment with slim design Very small form factor IP30 Ingress Protection Functions & Applications: Motion detection (doors, windows, drawers) - Reed switch (magnet is required) G-force measurement (adjustable trigger) On / Off External contact Pulse reading (water, gas, other counts) Temperature measurement Humidity measurement Moisture / leakage detection Technical data: Dimensions: 42 x 42 x 17 mm Weight: 25 g Protection class: IP30 Operating temperature: 0 - 60°C Battery type: CR2477 RF Power: 15 dBm RF Sensitivity: up to -137 dBm internal antenna LoRaWAN Class A

PoE Injector from LevelOne for the TEKTELIC KONA Macro Outdoor Gateway. Dieser PoE Injektor wird als Zubehör für die Nutzung des KONA Macro LoRaWAN® Outdoor Gateways benötigt. Letzteres finden Sie nachfolgend im Reiter "Zubehör". It uses Power over Ethernet (PoE) technology, which enables devices to be supplied with power and data simultaneously via their network connection. The PoE injector, or PoE adapter, thus enables the power supply of LoRaWAN® gateways via network connection. A PoE injector is thus a smart solution for supplying power to low-power devices that need to be placed in locations where no power outlet is available.

Antenna cable N-Male to N-Female for TEKTELIC KONA Macro IoT Gateway Very robust outdoor antenna cable with N-Type Male to Female connectors - suitable for the TEKTELIC KONA Macro Outdoor Gateway and the 2.5/3 dBi LoRaWAN® antenna.